Showing 76–100 of 456 results
£7✔ In Stock: 104
The unique polymer silicone formula of Son Of A Gun! Protectant penetrates surfaces to shine and protect vinyl, rubber and plastic. Son Of A Gun! helps protect surfaces from fading and cracking by reducing effects from ultraviolet light, while bringing out color and restoring luster and shine. It also protects against abrasion.
How it helps:
- Restores luster, leaving a deep, glossy shine,
- Reduces ultraviolet light that can cause fading and cracking,
- Usable on vinyl and your car’s dashboard.
£0.80 – £2.57Price range: £0.80 through £2.57✔ In Stock
Jubilee Original Range hose clips in zinc-protected mild steel are a reliable and cost-effective solution for everyday hose fastening needs. Widely used across automotive, agricultural, industrial, and construction sectors, these clips are manufactured in the UK with rigorous quality standards.
Made from mild steel and coated with high-quality zinc plating, these clips offer enhanced corrosion resistance—tested to exceed 240 hours in neutral salt spray conditions, far surpassing the 48-hour British Standard requirement.
Zinc-plated mild steel for general-purpose use,
Corrosion-tested to 240+ hours (5% salt spray),
Trusted in automotive, agriculture, construction, and DIY,
Made in the UK with strict quality control,
Sold Individually!
(10 Clips Per Box)
£1.96 – £5.63Price range: £1.96 through £5.63✔ In Stock
Jubilee Original Range 316 stainless steel hose clips offer exceptional corrosion resistance, making them ideal for marine, chemical, food processing, and industrial applications. Manufactured in the UK to the highest standards, these clips ensure a secure, long-lasting hold in harsh environments.
Premium 316 (18/10) stainless steel,
High corrosion resistance for demanding conditions,
Suitable for marine, chemical, automotive, and plumbing use,
Sold Individually!
(10 Clips Per Box)
£5.86✔ In Stock: 28
Amtech U0855 Folding Saw With D-Handle Soft Grip.
£5✔ In Stock: 9
An acrylic, solvent free dispersion that cures to form a durable, flexible seal. For internal use. Can easily be painted or papered over when dry. For sealing gaps around internal window and door frames, skirting boards, plasterboard, staircases, architrave and coving.
£2.69✔ In Stock: 64
A battery hydrometer is a tool used to measure the specific gravity (SP) of the electrolyte in a lead-acid battery. This measurement helps determine the state of charge and health of the battery. The specific gravity of the electrolyte changes depending on whether the battery is charged or discharged, and it can also be affected by temperature.
£162.85✔ In Stock: 1
SAC Clutch Alignment Tool Set Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool to allow the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors.
– Clutch Plate Adaptors: 17.8mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm | 22.9mm | 23mm | 25.9mm | 27.9mm | 31.9mm | 33.9mm
– Spigot Adaptors: 13.9mm | 14.9mm | 15.9mm | 16.9mm | 17.9mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm
– Assembly Flywheel Threads: 6 x 1.00mm | 7 x 1.00mm | 8 x 1.25mm
£17✔ In Stock: 2
Cylinder Hone with 75mm / 3″ Abrasive Stones. Flexible shaft for ease of use and self centring.
– Range: 51 – 177mm / 2 – 7″ Bore Diameter
£10✔ In Stock: 2
Brake Cylinder Hone 20 – 64mm | 3/4 – 2-1/2″ Diameter. Flexible shaft for ease of use and self centring.
£132.83✔ In Stock: 1
Dual Clutch Reset Tool Set – Ford. Designed to reset the twin clutch pack fitted to Ford 6 speed DPS6/6DCT250 transmissions.
Applicable To:
– Ford Transit Connect From 2014
– Fiesta From 2008
– Focus From 2010
– B-Max From 2012
OEM: 307-676
£9.71✔ In Stock: 5
The Brake Pipe Bending tool is designed to bend 5mm diameter brake lines. With its two bending options – tight and open radius bends – Its central 6mm Hex slot provides a secure and stable grip for accurate bends.
£5.52✔ In Stock: 11
Abrasive Disc. For use with Power Drills. Silicon carbide coated nylon mesh with fibreglass backing disc and steel arbor. For rust or paint removal / descaling / de-burring and preparation of welding seams or graffiti removal. For metal or stone cleaning / surface preparation and fabrication tasks.
– Diameter: 115mm
– Shank: 6mm
£7✔ In Stock: 2
2pc Spline Bit Set M18 x 75mm 10mm Hex Shank.
£7✔ In Stock: 2
2pc Spline Bit Set M16 x 75mm 10mm Hex Shank.
£145✔ In Stock: 2
For the removal and installation of bushes / bearings and seals etc… Fully universal applications on both cars and LCV.
– 22 Sleeves Material: 40 CR
– Inside Diameter: 34mm | 36mm | 38mm | 40mm | 42mm | 44mm | 46mm | 48mm ” 50mm | 52mm | 54mm | 56mm | 58mm | 60mm | 62mm | 64mm | 66mm | 68mm | 70mm | 72mm
– Outside Diameter: 44mm | 46mm | 48mm | 50mm | 52mm | 54mm | 56mm | 58mm | 60mm | 62mm | 64mm | 66mm | 68mm | 70mm | 72mm | 74mm | 76mm | 78mm | 80mm | 82mm
– 4 x Pulling Spindle 45# Carton Steel + Nuts Sizes: M10 | M12 | M14 | M16
– 4 x Stop Plate Discs:
Disc 1 For 34mm | 42mm | 50mm | 58mm | 66mm Sleeves
Disc 2 For 36mm | 44mm | 52mm | 60mm | 68mm Sleeves
Disc 3 For 38mm | 46mm | 54mm | 62mm | 70mm Sleeves
Disc 4 For 40mm | 48mm | 56mm | 64mm | 72mm Sleeves
£65✔ In Stock: 4
Wishbone Extractor Tool The wishbone extractor tool is for pushing down the wishbone and other suspension parts during the servicing of the drive shaft or during the replacement of the wheel bearing. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support. Comfortable rubber grip. Adjustable canter lever hook. Sliding adjustment for easy positioning.
– Total Length: 1180mm
£30✖ Out of Stock
Top quality punches suitable for use by professionals and enthusiasts. Manufactured from chrome vanadium steel and impacted for strength and durability.
- Includes: (Punch Head x Total Length)
- 3/8″ x 8″ (10mm x 200mm)
- 5/16″ x 8″ (8mm x 200mm)
- 1/4″ x 8″ (6mm x 200mm)
- 3/16″ x 8″ (4.8mm x 200mm)
- 5/32″ x 8″ (4mm x 200mm)
- 1/8″ x 8″ (3.2mm x 200mm)
- 3/32″ x 8″ (2.4mm x 200mm)
- 1/16″ x 8″ (1.6mm x 200mm)
- 3/8″ x 6″ (10mm x 150mm)
- 5/16″ x 6″ (8mm x 150mm)
- 1/4″ x 4″ (6mm x 100mm)
- 7/32″ x 4″ (5.5mm x 100mm)
- 3/16″ x 4″ (5mm x 100mm)
- 5/32″ x 4″ (4mm x 100mm)
- 1/8″ x 4″ (3mm x 100mm)
- 3/32″ x 4″ (2.5mm x 100mm)
- 1/16″ x 4″ (1.5mm x 100mm)
£6✔ In Stock: 2
2pc Star Bit Set T60 x 75mm, 10mm Hex Shank.
£6.24✔ In Stock: 5
For Removing the DSG Gearbox ECU / mechatronic control module Audi / VW 7-speed. Specially designed to remove load from plungers of the mechatronic unit when you insert the tool between clutch lever and gear housing. Ideal for use in conjunction with CT0500.
Applicable To: Audi / VW 7-Speed Dual Clutch Gearbox
£15.84✖ Out of Stock
2pc Stretch Belt Tool Set. Universal tool set for fitting stretch belts to modern vehicles.
£26✔ In Stock: 2
The is a 9-piece dent puller slide hammer set composed of a 5lb slide hammer with a finger grip handle for enhanced grip, a metal pulling screw, puller hooks, an L-shaped puller, steel nose cones, a piercing punch and a plate edge puller. Beneficially, this hammer is designed for both dent removal and bearing extraction from hubs and shafts. Dual-purpose dent puller and bearing remover tool set. Includes metal pulling screw, puller hooks, L-shaped puller, steel nose cones, piercing punch, and plate edge puller. High-quality materials for durability.
£89.51✔ In Stock: 2
Tyre Changer – Portable with Pry Bar. Steel construction with manual bead breaker. Suitable for use on most open centered wheels. Supplied with tyre bar. Handles most tyres from 8″ to 16″ (with a center hole through the rim) wheel rest plate dimension: 7-1/2″ Diameter x 3/16″ Thick.
– Size Of Base: 15-3/8″ x 18-1/2″
£6✔ In Stock: 14
The Windscreen Rubber Seal Cutting Wire. Made with stainless steel in a square profile, this product is perfect for removing butyl adhesive caulking compound around windows.
Material: Stainless Steel
Profile: Square
Length: 25m
£82.72✔ In Stock: 3
51pc Bearing / Bushing and Seal Master Driver Set. Suitable for mounting bearings / bushings and sealing rings, 220mm knurled handle grip for use with a hammer. Particularly useful when used with a hydraulic press.
– Support Disc 74mm | Bore 12.2mm | Height 15.2mm
– Disc Sizes 18mm | 19mm | 20mm | 21mm | 22mm | 23mm | 24mm | 25mm | 26mm | 27mm | 28mm | 29mm | 30mm | 31mm | 32mm | 33mm | 34mm | 35mm | 36mm | 37mm | 38mm | 39mm | 40mm | 41mm | 42mm | 43mm | 44mm | 45mm | 46mm | 47mm | 48mm | 49mm | 50mm | 51mm | 52mm | 53mm | 54mm | 55mm | 56mm | 57mm | 58mm | 59mm | 60mm | 61mm | 62mm | 63mm | 64mm | 65mm (12.2mm High & 12.2mm Bore)
– 3mm Hexagonal Key
