Showing 51–70 of 70 results
SKU: US3415
✔ In Stock: 10
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Industrial black phosphate finish. This high quality Socket comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size: T55
Length: 78mm
SKU: US1679
✔ In Stock: 4
Shallow single hex design. CRV steel construction. Industrial black finish. Supplied in tool box.
Sizes: 10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24, 27, 30, 32mm
1/2″ Drive
SKU: US3532
✔ In Stock: 2
Metric sizes 16mm / 17mm
75° Offset neck. CRV steel construction. Highly polished finish. Cold stamped. Dimpled non slip shaft.
Overall length 255mm (approx.)
SKU: US3872
✔ In Stock: 4
Fine 72 tooth ratchet operation. Only 5° of rotation required per tooth. Flex head design. Long reach. CRV steel construction. Highly polished finish.
Overall Length: 415mm (approx.)
Metric Sizes 17mm / 19mm
SKU: US9272
✔ In Stock: 6
An assortment of vehicle trim clips for German brands.
Contents: 339 Pieces
SKU: US5895
✔ In Stock: 1
Instruction booklet. Supplied in carry case. Replaces stripped/worn threads in cylinder head for M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 threaded glow plugs.
Thread Inserts: M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 (5 of each)
Taps: M8 X 1.0, M10 X 1.0, M10 X 1.25, M12 X 1.0, M12 X 1.25, M14 X 1.25
Knurled Head
Insert Guide Rod
Tap Guide Pin: 8 x 45, 10 x 45, 12 x 45
Insert Driver: M8 x 1.0 & M10 x 1.0, M10 x 1.25 & M12 x 1.25
SKU: US3222
✔ In Stock: 8
Sizes:
8 x 10mm (Approx Length: 234mm)
11 x 13mm (Approx Length: 329mm)
14 x 15mm (Approx Length: 369mm)
16 x 17mm (Approx Length: 409mm)
18 x 19mm (Approx Length: 409mm)
20 x 21mm (Approx Length: 415mm)
22 x 24mm (Approx Length: 432mm)
SKU: US2480
✔ In Stock: 3
A Metric High Quality Drill Bit Set For Alloyed And Unalloyed Steels. With A Precision Ground Tip, Split Point And 135° Angle Makes These Din 338 Bits Very Precise For Centring During Spot Drilling. Suitable For Drilling Cast Iron, Iron, Non Ferrous Metals And Steel.
The Set Contains The Following Sizes: 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, And 6.0mm
• Hss-g Xtra
• High Quality
• Din338 Standard
• Fully Ground
• 135 Degree Split Point
• Precise
• Durable
SKU: US1488
✖ Out of Stock
Comprehensive set of impact adaptors for use on all types of impact tools. Manufactured from drop-forged Chrome Vanadium steel, for the smaller sizes and Chrome Molybdenum for the bigger sizes, with phosphate finish for added corrosion protection. Spring ball socket retention. Industrial black finish. Supplied in tool case.
Sizes:
3/8″ (F) x 1/4″ (M) = CRV
1/4″ (F) x 3/8″ (M) = CRV
3/8″ (F) x 1/2″ (M) = CRV
1/2″ (F) x 3/8″ (M) = CRV
1/2″ (F) x 3/4″ (M) = CR MO
3/4″ (F) x 1/2″ (M) = CR MO
3/4″ (F) x 1″ (M) = CR MO
1″ (F) x 3/4″ (M) = CR MO
SKU: US5859
✔ In Stock: 4
All stored in moulded case. The set Contains the following:
1 x Hose Clamp Pliers
1 x Swivel Jaw Spring Wire Clip Pliers
1 x Swivel Jaw Band Clip Pliers
1 x Angled Flat Band Hose Clamp Pliers
1 x Hose Remover Pliers
1 x Clic- R Collar Pliers
1 x Flat Band Hose Clamp Pliers
1 x Screwdriver
1 x Hose Remover
SKU: US8615
✔ In Stock: 2
Drive: 1″ Square
Free Speed: 2800 RPM
Loading Air Consumption CFM: 59 (28 l/s)
Max Torque N-M: 4800 (3540 Ft/lb)
Air Pressure psi: 113-142 (8-10 Kg/cm²
Air Inlet: 1/2″
Air hose size mm: 13
Noise Level: 98(dBA)
Vibration: 21 m/s²
3 Forward speeds, 1 Reverse
Bolt capacity: 45mm
Exhaust: Side
Nett Weight: 18kgs
SKU: US6625
✔ In Stock: 1
Designed to identify and trace wires or cables without damaging the insulation. Also used for checking short circuit and locating open circuits etc… There is a sender and a receiver included in this instrument. Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery etc… Simple to use simply connect the transmitter in series with the circuit or wire under test and then scan the circuit/wire with the tracers flexible probe to find the trouble spot. Only for use on DC voltage do not use on AC voltage.
Operates on DC voltages from 6 – 42 volts. Do not connect to circuit exceeding 42 volts DC. Do not use with any component or circuits of the ignition system. Internally protected against power surges and overloads. Adjustable sensitivity for all tracking situations. The probe of the receiver is built of coiled steel and may be bent as needed in order to reach wires in congested or difficult areas. For the best possible range, the receivers probe tip (black cap) should be positioned perpendicular (90 degrees) to the wire being traced. 7″ Flexible probe allows reaching wires in congested places. Transmitter and receiver LEDS show open or short circuit conditions. Powered off 2 x 9v batteries (Included) comes complete with a full set of instructions for accurate and quick use. Supplied in a storage case.
✔ In Stock
Flexible Gear Ratchet Combination Wrench 8 – 24mm
SKU: US5233
✔ In Stock: 7
Designed to measure return fuel flow on diesel vehicles having up to 6 cylinders fitted with common rail injection system. Identifies, worn, blocked or inoperative injectors. Supplied with both measurement tubes and bottles for short or long term testing. 24 Injector adaptors for BOSCH, SIEMENS, DENSO and DELPHI injectors. Supplied in a blow moulded storage case. This high quality Flow Meter comes to you brand new with retail packaging. This is a perfect addition / replacement to any toolbox or workshop.
SKU: US3744
✔ In Stock: 2
Forged from steel with black phosphate coating for protection. Hardened and tempered for enhanced durability. 1″ drive so will fit any 1″ drive ratchets / bars / extensions etc.
Size: 36mm
Points: 6
Total length of socket: 80mm
Outside diameter of socket end: 55mm
Outside diameter of drive end: 50mm
Hardened: HRC 38-42 for durability
Finish: Black phosphate for protection
SKU: US3862
✔ In Stock: 10
Size: 19mm
Points: 12
Drive: 1/2″
Total length of socket: 78mm
Style: Euro
CR-V with black phosphate finish for protection.
SKU: US2287
✔ In Stock: 5
Universal Spanner Extender Extension Wrench Power Bar 385mm
SKU: US6263
✔ In Stock: 3
Designed to straighten out clamp dents in mufflers and tailpipes quickly and easily. A Simple wrench turn expands pipe for exhaust system repair and installation. A perfect tool for fitting after market rear boxes to a standard exhaust. This high quality Pipe Expander Set comes to you brand new with retail packaging/tag. Full set of 3 expanders to fit small, medium, large cars, 4 x 4’s and commercial vehicles. Expander Sizes:
Small Expander: 1-1/8″ to 1-3/4″
Medium Expander: 1-1/2″ to 2-1/2″
Large Expander: 2-1/8″ to 3-1/2″
SKU: US7055
✔ In Stock: 2
US7055 US Pro VAG VW AUDI SEAT SKODA Timing Tool Locking Kit Diesel Engine 1.4 – 1.6 – 2.0 TDI. Timing tool set for Audi, Seat, Skoda and VW with diesel TDI CR engines from 2012.
Applications:
SKU: US2885
✔ In Stock: 64
US2885 US Pro Strong, flexible adhesive cloth tape used to harness wiring looms. Corrosion and flame resistant with good bonding strength. Width: 19mm Length: 15m Colour: Black
US PRO Impact Socket 1'' Dr. 36mm 6pt 3744
1 × £4.60 