Showing 26–50 of 70 results
SKU: US6815
✖ Out of Stock
US6815 US Pro Automotive Circuit Tester 6 – 12V. Sharp steel probe easily pierces wire insulation to check circuitry. Light glows in handle when a circuit is complete. Steel spring to protect the ground wire.
SKU: US9108
✔ In Stock: 1
US9108 US Pro 1 Leg Chain Sling – 1m, 8mm G80 2 Tonne. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2 Tonnes and conforms to EN 818-4 (Grade 80). It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
1 x Connector Link: G80, WLL 2T
1 x 1 Metre 8mm Chain: G80, WLL 2T
1 x Clevis Hook: G80, WLL 2T
1 x ID Tag
SKU: US8762
✔ In Stock: 4
US8762 US Pro Mini HVLP Spray Gun. Gravity feed, precise air control. Plastic top which keeps the weight down when using this application.
SKU: US7065
✖ Out of Stock
US7065 US Pro 30pc Cup Type Oil Filter Wrench Set. 3 – Jaw Wrench 65-120mm. Adaptor 1/2(F) N 3/8(M) Square Drive Tool.
SKU: US7170
✔ In Stock: 2
US7170 US Pro Contains tools vital for setting and locking the engine and for setting the position of the variable cam timing units. Note: No instructions included. Intended for installation by a suitably trained person.
Contents:
303-732 – Camshaft Alignment Tool
303-1054 – Tensioner Pulley Locking Pin
303-1602 – Flywheel Locking Tool
303-1604 – Camshaft Timing Pin
303-1605/1 – Camshaft Locking Tool
303-1605/2 – Camshaft Locking Tool
303-1606 – Variable Camshaft Timing Locking Tool
Applications: Ford B-MAX, C-MAX, Grand C-MAX, EcoSport, Fiesta, Focus, Transit Connect, Transit Courier and Tourneo Connect
Engine: 1.0 EcoBoost, 1.0 SCTi EcoBoost
Engine Codes: M1DA, M1JC, M1JE, M2DA, P4JA, P4JB, SFJA, SFJB
SKU: US6292
✖ Out of Stock
US6292 US Pro VW T5 And Touareg Front Wheel Bearing Tool For The Removal/Install Of 85mm GEN2 Wheel Bearings. Applicable to Volkswagen T5 Transporter Multivan (2003-2015) and Touareg SUV (2010-2018), generation 2 style wheel bearings are a wheel bearing and drive flange that cannot be separated using the clamshell & force plates of tool ensures the insertion load is taken only on the outer race of the bearing. It can be used in-situ without the need to remove the strut or hub from the vehicle.
1 x High Strength Drive Spindle With Bearing
1 x Pair Of Shells For Dismantling (85mm)
1 x Dismantling Plate
1 x Pair Of Shells For Installation (85mm)
1 x Installation Plate
2 x Bolts To Secure Shells
1 x Pressure Plate With 5 Holes
5 x Pressure Plate Bolts
1 x Hex Hey
SKU: US6192
✔ In Stock: 2
US6192 US Pro This tool set makes it easier to insert wheel bearing race and seals without damaging the race or axle housing. Turn discs over to drive seals.
SKU: US6697
✔ In Stock: 98
US6697 US Pro 6″ Heavy Duty Magnetic Parts Bowl Rubber Non Scratch Base. Stainless steel magnetic bowl. Size: 6″ x 1″
SKU: US5034
✔ In Stock: 15
US5034 US Pro 4pc Short Mini Pick & Hook Set. Overall Length: 135mm (approx.)
– 1 x 90 Degrees
– 1 x 135 Degrees
– 1 x 180 Degrees
– 1 x 75 Degrees
SKU: US3652
✔ In Stock: 3
US3652 US Pro 17pc Impact Hex Bit Socket Set. CR-V sockets with hardened S2 bits for enhanced durability. Phosphate finish.
SKU: US3529
✖ Out of Stock
US3529 US Pro A set of double ended ring spanners with a 75 degree offset. Made from CR-V material with a Non-slip finish. Supplied with storage pouch.
SKU: US3236
✔ In Stock: 3
US3236 US Pro 20 Piece Metric Ratchet Spanner Wrench Set. Supplied with a hard case with a handle. 72 Teeth ratchet drive. Supplied with 1/4″, 3/8″ and 1/2″ drive adapters.
SKU: US2212
✔ In Stock: 11
US2212 US Pro Single 24mm Combination Spanner CR-V
SKU: US1386
✔ In Stock: 9
US1386 US Pro 3/4″ 8pc Single Hex 6 Point Deep Impact Socket Set. Manufactured from Chrome Vanadium Steel HRC42-45 with blackened finish for maximum durability. Supplied in blow moulded storage case with handle.
SKU: US9272
✔ In Stock: 3
An assortment of vehicle trim clips for German brands.
Contents: 339 Pieces
SKU: US9156
✔ In Stock: 1
US9156 US Pro 1.2mm MIG Welding Wire 15kg ER70S-6 Mild Steel. High grade mild steel solid wire for use with CO2 and Argon/CO2 mix gas. Widely used for automotive, engineering and fabrication work. Copper coated.
SKU: US8615
✔ In Stock: 2
Drive: 1″ Square
Free Speed: 2800 RPM
Loading Air Consumption CFM: 59 (28 l/s)
Max Torque N-M: 4800 (3540 Ft/lb)
Air Pressure psi: 113-142 (8-10 Kg/cm²
Air Inlet: 1/2″
Air hose size mm: 13
Noise Level: 98(dBA)
Vibration: 21 m/s²
3 Forward speeds, 1 Reverse
Bolt capacity: 45mm
Exhaust: Side
Nett Weight: 18kgs
SKU: US8423
✔ In Stock: 6
US8423 US Pro 3” Air Cut Off Tool. Durable lightweight aluminium casing, 180 degree stainless steel guard. Safety trigger.
SKU: US8323
✔ In Stock: 5
US8323 US Pro 6” Air Orbital Sander With Dust Extraction.
SKU: US6625
✔ In Stock: 2
Designed to identify and trace wires or cables without damaging the insulation. Also used for checking short circuit and locating open circuits etc… There is a sender and a receiver included in this instrument. Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery etc… Simple to use simply connect the transmitter in series with the circuit or wire under test and then scan the circuit/wire with the tracers flexible probe to find the trouble spot. Only for use on DC voltage do not use on AC voltage.
Operates on DC voltages from 6 – 42 volts. Do not connect to circuit exceeding 42 volts DC. Do not use with any component or circuits of the ignition system. Internally protected against power surges and overloads. Adjustable sensitivity for all tracking situations. The probe of the receiver is built of coiled steel and may be bent as needed in order to reach wires in congested or difficult areas. For the best possible range, the receivers probe tip (black cap) should be positioned perpendicular (90 degrees) to the wire being traced. 7″ Flexible probe allows reaching wires in congested places. Transmitter and receiver LEDS show open or short circuit conditions. Powered off 2 x 9v batteries (Included) comes complete with a full set of instructions for accurate and quick use. Supplied in a storage case.
SKU: US6263
✔ In Stock: 3
Designed to straighten out clamp dents in mufflers and tailpipes quickly and easily. A Simple wrench turn expands pipe for exhaust system repair and installation. A perfect tool for fitting after market rear boxes to a standard exhaust. This high quality Pipe Expander Set comes to you brand new with retail packaging/tag. Full set of 3 expanders to fit small, medium, large cars, 4 x 4’s and commercial vehicles. Expander Sizes:
Small Expander: 1-1/8″ to 1-3/4″
Medium Expander: 1-1/2″ to 2-1/2″
Large Expander: 2-1/8″ to 3-1/2″
SKU: US5895
✔ In Stock: 2
Instruction booklet. Supplied in carry case. Replaces stripped/worn threads in cylinder head for M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 threaded glow plugs.
Thread Inserts: M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 (5 of each)
Taps: M8 X 1.0, M10 X 1.0, M10 X 1.25, M12 X 1.0, M12 X 1.25, M14 X 1.25
Knurled Head
Insert Guide Rod
Tap Guide Pin: 8 x 45, 10 x 45, 12 x 45
Insert Driver: M8 x 1.0 & M10 x 1.0, M10 x 1.25 & M12 x 1.25
SKU: US5859
✔ In Stock: 6
All stored in moulded case. The set Contains the following:
1 x Hose Clamp Pliers
1 x Swivel Jaw Spring Wire Clip Pliers
1 x Swivel Jaw Band Clip Pliers
1 x Angled Flat Band Hose Clamp Pliers
1 x Hose Remover Pliers
1 x Clic- R Collar Pliers
1 x Flat Band Hose Clamp Pliers
1 x Screwdriver
1 x Hose Remover
SKU: US5586
✔ In Stock: 3
US5586 US Pro 3pc 3/8” Dr. Oxygen/Vacuum Sensor Socket Set. Chrome vanadium steel, heat-treated for strength and durability. Contains 3 most popular oxygen and vacuum switch sockets.
SKU: US5233
✔ In Stock: 1
Designed to measure return fuel flow on diesel vehicles having up to 6 cylinders fitted with common rail injection system. Identifies, worn, blocked or inoperative injectors. Supplied with both measurement tubes and bottles for short or long term testing. 24 Injector adaptors for BOSCH, SIEMENS, DENSO and DELPHI injectors. Supplied in a blow moulded storage case. This high quality Flow Meter comes to you brand new with retail packaging. This is a perfect addition / replacement to any toolbox or workshop.
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now