US Pro
Showing 1–16 of 108 results
1 Leg Chain Sling – 1m, 8mm G80 2 Tonne
£40SKU: US9108
✔ In Stock: 3
US9108 US Pro 1 Leg Chain Sling – 1m, 8mm G80 2 Tonne. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2 Tonnes and conforms to EN 818-4 (Grade 80). It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
1 x Connector Link: G80, WLL 2T
1 x 1 Metre 8mm Chain: G80, WLL 2T
1 x Clevis Hook: G80, WLL 2T
1 x ID Tag1.2mm MIG Welding Wire 15kg ER70S-6 Mild Steel
£32.56SKU: US9156
✖ Out of Stock
US9156 US Pro 1.2mm MIG Welding Wire 15kg ER70S-6 Mild Steel. High grade mild steel solid wire for use with CO2 and Argon/CO2 mix gas. Widely used for automotive, engineering and fabrication work. Copper coated.
- Wire Diameter: 1.2mm
- Weight: 15kg
- Spool Size: 300mm (Diameter)
- Standards: ER70S-6, AWS A5.18, EN ISO 14341, CE, TUV
10mm Flexible Gear 72 Teeth Ratchet Combination Wrench
£6SKU: US3879
✖ Out of Stock
US3879 US Pro 10mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
10pc 1/2″ Dr. Specialist Automotive Socket Set
£24.34SKU: US3467
✔ In Stock: 4
A collection of difficult to find socket types often not included in standard sets.
• M10S special profile 6 point socket for Toyota idler gear centre fixings
• 20mm 10 point socket for Honda Civic lower control arm bolts
• M6S, M8S, M12S special profile 6 point for Nissan and Renault clutches, cylinder heads and balance shaft fixings
• 8TS special 3 point profile for Nissan Balance shaft fixings
• 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings
– 19mm 5 sided socket for Citroen, Peugeot and Renault brake calliper mounting plate fixings.
14mm 5 sided socket for Smart car, Astra G and Zafira brake calliper mounting plate fixing
• Supplied on a storage rail110pc Copper Washer Assortment Box
£13SKU: US2888
✔ In Stock: 18
US2888 US Pro 110pc Copper Washer Assortment Box.
Contains:
– 30pc 6 x 10 x 0.9mm
– 25pc – 8 x 12 x 0.9mm
– 20pc – 10 x 16 x 1.0mm
– 15pc – 11 x 17 x 1.3mm
– 10pc – 12 x 20 x 1.44mm
– 10pc – 16 x 22 x 1.44mm11pc Impact Nut Style Bolt Extractor Set
£22SKU: US2648
✔ In Stock: 7
US2648 US Pro 11pc Impact Nut Style Bolt Extractor Set. These screw extractors enable rounded or rusted hexagonal nuts, bolts or screws to be removed. Supplied in a storage case.
- Sizes: 9mm | 10mm | 11mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 19mm
- Includes: 7mm x 90mm Round Bar
12mm Flexible Gear Ratchet Combination Wrench
£7SKU: US3881
✔ In Stock: 9
12 mm flexible gear ratchet combination wrench made to DIN 3113 standard with 72‑tooth ratchet drive hardened to HRC 42–49. CR‑V steel construction. Sold individually.
12pc 1” Dr. 6pt Deep Impact Socket Set Metric
£65SKU: US2096
✔ In Stock: 2
US2096 US Pro 12pc 1” Dr. 6 Point Deep Impact Socket Set Metric. Chrome Vanadium Hardened Steel HRC42-45. Single hex. Deep impact. Supplied in blow moulded storage case.
- Sizes: 24mm | 26mm | 27mm | 29mm | 30mm | 32mm | 33mm | 34mm | 35mm | 36mm | 38mm | 41mm
- 1” Drive
- Length: 85mm
12pc Bag Of Assorted Air Hose Fittings
£21SKU: US8184
✔ In Stock: 34
US8184 US PRO 12pc Set “Two Touch” type – pull back to open and release to lock, connection couplings and fittings.
- Thread Type: BSP, Taper
- Includes:
1 x 1/4” F Coupler
1 x 1/4” M Coupler
1 x 3/8” M Coupler
2 x 1/4” F Plug
2 x 1/4” M Plug
2 x 8mm Hose Tail Plug
1 x 3/8” F Plug
1 x 3/8” M Plug
1 x 10mm Hose Tail Plug
13mm Flexible Gear 72 Teeth Ratchet Combination Wrench
£7SKU: US3882
✖ Out of Stock
US3882 US Pro 13mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
15 mm Flexible Gear Ratchet Combination Wrench
£4.45SKU: US3884
✔ In Stock: 9
15 mm Flexible Gear Ratchet Combination Wrench
17pc Impact Hex Bit Socket Set 1/4″ 3/8″ 1/2″ Drives
£27SKU: US3652
✔ In Stock: 5
US3652 US Pro 17pc Impact Hex Bit Socket Set. CR-V sockets with hardened S2 bits for enhanced durability. Phosphate finish.
- 1/4″ Drive: H2 | H2.5 | H3 | H4 | H5 | H5.5 | H6
- 3/8″ Drive: H7 | H8 | H9 | H10 | H12
- 1/2″ Drive: H14 | H15 | H17 | H19 | H22
17pc Metric Bush & Bearing Driver Set
£20SKU: US6192
✖ Out of Stock
US6192 US Pro This tool set makes it easier to insert wheel bearing race and seals without damaging the race or axle housing. Turn discs over to drive seals.
- Disc Number 1: I.D. 10mm O.D. 12mm
- Disc Number 2: I.D. 12mm O.D. 14mm
- Disc Number 3: I.D. 14mm O.D. 16mm
- Disc Number 4: I.D. 15mm O.D. 17mm
- Disc Number 5: I.D. 16mm O.D. 18mm
- Disc Number 6: I.D. 18mm O.D. 20mm
- Disc Number 7: I.D. 20mm O.D. 22mm
- Disc Number 8: I.D. 22mm O.D. 24mm
- Disc Number 9: I.D. 25mm O.D. 27mm
- Disc Number 10: I.D. 28mm O.D. 30mm
- Disc Number 11: I.D. 30mm O.D. 34mm
- Disc Number 12: I.D. 32mm 36mm
- Disc Number 13: I.D. 35mm 40mm
- Disc Number 14: I.D. 38mm 42mm
18 x 19mm 75 Degree Double Offset Ring Spanner
£2.50SKU: US3533
✖ Out of Stock
US3533 US Pro 18 x 19mm 75 Degree Double Offset Ring Spanner. Metric sizes 18mm / 19mm, 75° Offset neck. CRV steel construction. Highly polished finish. Cold stamped. Dimpled non slip shaft. Overall length 260mm (approx.)
18pc Pin Punch Set
£30SKU: US2095
✔ In Stock: 11
18PC Pin Punch Set – US PRO (2095) The US PRO 18‑Piece Pin Punch Set (2095) is a professional-grade tool kit designed for precision marking, pin removal, and alignment tasks across automotive, engineering, fabrication, and workshop environments. Each punch is manufactured from hardened and tempered steel, ensuring long-lasting durability and reliable performance for both professional…
2 Leg Chain Sling 1m, 8mm G80 2.8 Tonne Adjustable
£60SKU: US9109
✔ In Stock: 5
US9109 US Pro 2 Leg Chain Sling 1m, 8mm G80 2.8 Tonne Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2.8 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened. It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
2 x Connector Link: G80, WLL 2T
2 x Grab Hooks (Shorteners): G80, WLL 2T
2 x 1m, 8mm Chain: G80, WLL 2T
2 x Clevis Hook: G80, WLL 2T
1 x ID Tag
