“8pc 1″ Deep Impact Socket Set” has been added to your cart.
View cart
Showing 26–50 of 70 results
-
£27.83
✔ In Stock: 10
US3223 US Pro 5pc Aviation Extra Long Double Ring Spanner Set. Extra long slim shafts. Mirror polished. Hardened and tempered. Ring head extends out from the shaft on one side. Double hex ring spanner on either end. Manufactured from the highest quality chrome vanadium steel 6140. Supplied in a canvas storage pouch.
8 x 10mm (Approx. Length: 234mm)
11 x 13mm (Approx. Length: 329mm)
14 x 15mm (Approx. Length: 369mm)
16 x 17mm (Approx. Length: 409mm)
18 x 19mm (Approx. Length: 409mm)
-
£45.16
✔ In Stock: 1
US8323 US Pro 6” Air Orbital Sander With Dust Extraction.
- Free Speed RPM: 11,000
- Air Consumption CFM: 3
- Pad: 150mm
- Angle: 90deg
- Length: 214mm
- Weight: 1.1kg
- Air Pressure: 90psi
- Air Inlet: 1/4″
-
£2.63
✔ In Stock: 100
US6697 US Pro 6″ Heavy Duty Magnetic Parts Bowl Rubber Non Scratch Base. Stainless steel magnetic bowl. Size: 6″ x 1″
-
£14
✔ In Stock: 1
US3228 US Pro 6pc 3/8″ & 1/2″ Dr. Triple Square Spline Bit Socket Set.
3 Piece In 3/8″ Drive:
– M6 (48.5mm L): Various Applications On European Vehicles
– M8 (58mm L): Remove & Install Head & Accessory Bolts On Mercedes. Remove & Install Axle Shaft Bolts On VW | Audi’s
– M10 (67.8mm L): Used For Cylinder Head Bolts & Drive Shaft Bolts On Mercedes. Remove & Install Cylinder Head Bolts On VW | Audi’s
3 Piece In 1/2″ Drive:
– M12 (108mm L): Remove & Install Cylinder Head Bolts On Mercedes, Rear Toe Adjustment On 1999 & Newer Audi A6 & Axle Shaft Bolts On New VW’s
– M14 (108mm L): Used For 2003 & Later VW Touareg Front Axle Boots, 2003 & Later Porsche Cayenne Front Axle Boots, Various Audi | VW Axle Boots + Audi TT Differential Mount Bolts & Transmission Drain Plug
– M16 (108mm L, Tamper Proof): Used For Audi TT Clutch & Belly Pan, Various Audi | VW Transmission Drain Plugs, 2003 & Later VW Touareg | Porsche Cayenne Brake Caliper Bolts, Detroit Diesel’s Flywheel Bolts & Front Crank Pullers On 900 & 4000 Engine Plus Head Bolts On 900 Engine
-
£14.50
✔ In Stock: 5
US3528 US Pro 7pc Double Offset Ring Spanner Set 6 – 19mm 75 Degree. A set of double ended ring spanners with a 75 degree offset. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Mirror polish & Non-slip finish. Supplied with storage pouch.
- Sizes: 6 x 7mm, 8 x 9mm, 10 x 11mm, 12 x 13mm, 14 x 15mm, 16 x 17mm and 18 x 19mm
-
£60
✔ In Stock: 2
Chrome molybdenum steel used for applications that. Command high torque rates. Chemically blacked, 6 point hardened & tempered impact sockets. Phosphate finish to assist with corrosion resistance. Drilled head to facilitate retaining pin. For use with air impact wrenches.Â
- Sizes: 24mm | 27mm | 29mm | 30mm | 32mm | 33mm | 36mm | 38mm
-
£40
✔ In Stock: 6
US1386 US Pro 3/4″ 8pc Single Hex 6 Point Deep Impact Socket Set. Manufactured from Chrome Vanadium Steel HRC42-45 with blackened finish for maximum durability. Supplied in blow moulded storage case with handle.
- Sizes: 24m | 27mm | 29mm | 30mm | 32mm | 35mm | 36mm | 38mm
- 3/4 Inch Drive
- Length: 75mm
-
£9.46
✖ Out of Stock
US3654 US Pro 8pc 3/8″ Dr. Extra Long Impact Star Torx Bit Socket Set. An eight piece set of extra long Star bit sockets for use with torx products. Phosphate finish, CR-V sockets with hardened S2 bits for enhanced durability, 3/8″ Dr. so will fit any 3/8″ Dr. ratchets / bars / extensions etc…
- Contents: T25 | T27 | T30 | T40 | T45 | T50 | T55 | T60
- Length: 110mm
-
£13.66
✔ In Stock: 6
US3529 US Pro A set of double ended ring spanners with a 75 degree offset. Made from CR-V material with a Non-slip finish. Supplied with storage pouch.
- Sizes: 6mm x 7mm | 8mm x 9mm | 10mm x 11mm | 12mm x 13mm | 14mm x 15mm | 16mm x 17mm | 18mm x 19mm | 20mm x 22mm
-
£16.21
✔ In Stock: 18
US8789 US Pro Air Pulse Turbo Cleaning Gun 1000ml. Ideal for upholstery, air conditioning, plastic parts, car mirrors, seats, floor mats, ventilation grilles, rims and other surfaces. The design of the nozzles allows cleaning of hard-to-reach places & enables surfaces to be cleaned with minimal moisture. Aluminium body.
- 2 Nozzles
- Working Pressure: 87 – 110psi
- Operating Temperature: 10°C – 40 °C
- Cup Capacity: 1000ml
- DO NOT EXCEED 110psi!
-
£1.81
✖ Out of Stock
US6815 US Pro Automotive Circuit Tester 6 – 12V. Sharp steel probe easily pierces wire insulation to check circuitry. Light glows in handle when a circuit is complete. Steel spring to protect the ground wire.
- Range: 6 – 24V DC
- Tool Length: 195mm (approx.)Â
- Exposed Probe Length: 80mm (approx.)
- Wire Length: 950mm (approx.)
- CE Approved
-
£5
✖ Out of Stock
US9278 US Pro Breakaway Cable 1055mm – Snap Hook & Clevis Pin Type. Heavy duty breakaway cable for caravans, trailers, horse boxes etc. Designed to activate the brakes on your trailer or caravan in the event if a decoupling. The cable is made from 3-4mm multi-strand steel wire with a protective red PVC sheathing. There is a snap hook fitting one end and U fitting with clevis pin the other.
- Overall Length: 1055mm
- Wire: 3 – 4mm Multi-strand
- Breaking Load: 5000N
- Snap Hook: 70 x 6.7mm
- U Fitting: 47.5 x 18.5mm (2.7mm Plate)
- PVC Coated Wire
-
£5
✔ In Stock: 78
US9277 US Pro Breakaway Cable 1055mm – Snap Hook & Ring Type. Heavy duty breakaway cable for caravans, trailers, horse boxes etc. Designed to activate the brakes on your trailer or caravan in the event if a decoupling. The cable is made from 3-4mm multi-strand steel wire with a protective red PVC sheathing. There is a snap hook fitting one end and ring fitting the other.
- Overall Length: 1055mm
- Wire: 3 – 4mmÂ
- Multi-strand Breaking Load: 5000N
- Snap Hook: 80 x 7.5mmÂ
- Ring: 35 x 5mmÂ
- PVC Coated Wire
-
£3.16
✖ Out of Stock
US2212 US Pro Single 24mm Combination Spanner CR-V
-
£90
✖ Out of Stock
US7170 US Pro Contains tools vital for setting and locking the engine and for setting the position of the variable cam timing units. Note: No instructions included. Intended for installation by a suitably trained person.
Contents:
303-732 – Camshaft Alignment Tool
303-1054 – Tensioner Pulley Locking Pin
303-1602 – Flywheel Locking Tool
303-1604 – Camshaft Timing Pin
303-1605/1 – Camshaft Locking Tool
303-1605/2 – Camshaft Locking Tool
303-1606 – Variable Camshaft Timing Locking Tool
Applications: Ford B-MAX, C-MAX, Grand C-MAX, EcoSport, Fiesta, Focus, Transit Connect, Transit Courier and Tourneo Connect
Engine: 1.0 EcoBoost, 1.0 SCTi EcoBoost
Engine Codes: M1DA, M1JC, M1JE, M2DA, P4JA, P4JB, SFJA, SFJB
-
£90
✔ In Stock: 3
US6292 US Pro VW T5 And Touareg Front Wheel Bearing Tool For The Removal/Install Of 85mm GEN2 Wheel Bearings. Applicable to Volkswagen T5 Transporter Multivan (2003-2015) and Touareg SUV (2010-2018), generation 2 style wheel bearings are a wheel bearing and drive flange that cannot be separated using the clamshell & force plates of tool ensures the insertion load is taken only on the outer race of the bearing. It can be used in-situ without the need to remove the strut or hub from the vehicle.
1 x High Strength Drive Spindle With Bearing
1 x Pair Of Shells For Dismantling (85mm)
1 x Dismantling Plate
1 x Pair Of Shells For Installation (85mm)
1 x Installation Plate
2 x Bolts To Secure Shells
1 x Pressure Plate With 5 Holes
5 x Pressure Plate Bolts
1 x Hex Hey
-
£105
âš Available on backorder
US5149 US Pro Hydraulic ram providing up to 10 tons of power the most stubborn of hubs. To aid in the removal of wheel hubs, etc… For both four & five stud hubs. Can be used for a wide range of applications. Diameter of the tools disc 148mm approximately.
-
£7.36
✔ In Stock: 6
US6733 US Pro Magnetic Tool Holder Set 200, 300, 450mm. Multi-purpose magnetic tool holder. Organize, hold and display hardware items such as hammers, wrenches, screwdrivers and more. Perfect for use in garages, service stations, workshops, commercial kitchens, and even inside trucks and vans. Very powerful magnets. Can hold hammers, wrenches, screwdrivers, punches and more. Pre-drilled holes. 6 Screws included.
- Sizes: 8″ (200mm), 12″ (300mm), 18″ (455mm)
-
£19
✔ In Stock: 12
US8762 US Pro Mini HVLP Spray Gun. Gravity feed, precise air control. Plastic top which keeps the weight down when using this application.
- Air Consumption: 9 CFM
- Air Pressure: 3barÂ
- Nozzle Size: 0.8mmÂ
- Pot Connection Thread Size: M14 x 1.0Â
- Air Inlet: 1/4″ BSPÂ
- Pot Capacity: 125ml
-
£2
✔ In Stock: 240
US2105 US Pro This multi-purpose scratch brush is manufactured from a heavy duty construction with plastic grip & brass coated steel wire. Ideal for removing rust and paint also cleaning the BBQ and preparing metal surfaces.
-
£13.66
✔ In Stock: 3
US6194 US Pro Universal CV Joint Removal Tool. Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to the transmission. Saves on labour time and suitable for most vehicles.
-
£7
✔ In Stock: 108
Heavy Duty Webbing Strap. Strong CR-MO material. This high quality Oil Filter Strap Wrench comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size Range: 21 – 120mm
Drive: 1/2″
-
£5
✔ In Stock: 8
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. CR-MO with HRC50-53. Black phosphate finish for protection.
Size: T45
Length: 78mm
-
£5
✔ In Stock: 7
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Industrial black oxide finish. This high quality T50 Torx socket comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size: T50
Length: 78mm
-
£5
✔ In Stock: 7
CRV Steel socket. S2 Steel bit.
1/2″ Drive
Overall length: 53mm
Bit length: 17mm
STARCHEM Masking Tape 48mm x 45m (Case 20 Rolls) 
STARCHEM Boxed 5m Kleer-Mask Masking Roll 
SIMONIZ Very High Temperature Paint Matt Black 500ml