“3pc 3/8” Dr. Oxygen/Vacuum Sensor Socket Set” has been added to your cart.
View cart
Showing 1–25 of 64 results
-
£33.62
✔ In Stock: 6
US9108 US Pro 1 Leg Chain Sling – 1m, 8mm G80 2 Tonne. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2 Tonnes and conforms to EN 818-4 (Grade 80). It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
1 x Connector Link: G80, WLL 2T
1 x 1 Metre 8mm Chain: G80, WLL 2T
1 x Clevis Hook: G80, WLL 2T
1 x ID Tag
-
£32.56
✖ Out of Stock
US9156 US Pro 1.2mm MIG Welding Wire 15kg ER70S-6 Mild Steel. High grade mild steel solid wire for use with CO2 and Argon/CO2 mix gas. Widely used for automotive, engineering and fabrication work. Copper coated.
- Wire Diameter: 1.2mm
- Weight: 15kg
- Spool Size: 300mm (Diameter)
- Standards: ER70S-6, AWS A5.18, EN ISO 14341, CE, TUV.
-
£3,879
✔ In Stock: 20
US3879 US Pro 10mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
-
£25.81
✔ In Stock: 10
A collection of difficult to find socket types often not included in standard sets.
• M10S special profile 6 point socket for Toyota idler gear centre fixings
• 20mm 10 point socket for Honda Civic lower control arm bolts
• M6S, M8S, M12S special profile 6 point for Nissan and Renault clutches, cylinder heads and balance shaft fixings
• 8TS special 3 point profile for Nissan Balance shaft fixings
• 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings
– 19mm 5 sided socket for Citroen, Peugeot and Renault brake calliper mounting plate fixings.
14mm 5 sided socket for Smart car, Astra G and Zafira brake calliper mounting plate fixing
• Supplied on a storage rail
-
£13.44
✔ In Stock: 13
US2648 US Pro 11pc Impact Nut Style Bolt Extractor Set. These screw extractors enable rounded or rusted hexagonal nuts, bolts or screws to be removed. Supplied in a storage case.
- Sizes: 9mm | 10mm | 11mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 19mm
- Includes: 7mm x 90mm Round Bar
-
£4.18
✔ In Stock: 23
US3882 US Pro 13mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
-
£16.91
✔ In Stock: 6
US3652 US Pro 17pc Impact Hex Bit Socket Set. CR-V sockets with hardened S2 bits for enhanced durability. Phosphate finish.
- 1/4″ Drive: H2 | H2.5 | H3 | H4 | H5 | H5.5 | H6
- 3/8″ Drive: H7 | H8 | H9 | H10 | H12
- 1/2″ Drive: H14 | H15 | H17 | H19 | H22
-
£16.80
✔ In Stock: 2
US6192 US Pro This tool set makes it easier to insert wheel bearing race and seals without damaging the race or axle housing. Turn discs over to drive seals.
- Disc Number 1: I.D. 10mm O.D. 12mm
- Disc Number 2: I.D. 12mm O.D. 14mmÂ
- Disc Number 3: I.D. 14mm O.D. 16mmÂ
- Disc Number 4: I.D. 15mm O.D. 17mm
- Disc Number 5: I.D. 16mm O.D. 18mmÂ
- Disc Number 6: I.D. 18mm O.D. 20mmÂ
- Disc Number 7: I.D. 20mm O.D. 22mmÂ
- Disc Number 8: I.D. 22mm O.D. 24mmÂ
- Disc Number 9: I.D. 25mm O.D. 27mmÂ
- Disc Number 10: I.D. 28mm O.D. 30mmÂ
- Disc Number 11: I.D. 30mm O.D. 34mmÂ
- Disc Number 12: I.D. 32mm 36mmÂ
- Disc Number 13: I.D. 35mm 40mmÂ
- Disc Number 14: I.D. 38mm 42mm
-
£2.50
✖ Out of Stock
US3533 US Pro 18 x 19mm 75 Degree Double Offset Ring Spanner. Metric sizes 18mm / 19mm, 75° Offset neck. CRV steel construction. Highly polished finish. Cold stamped. Dimpled non slip shaft. Overall length 260mm (approx.)
-
£60
✔ In Stock: 6
US9109 US Pro 2 Leg Chain Sling 1m, 8mm G80 2.8 Tonne Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2.8 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened. It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
2 x Connector Link: G80, WLL 2T
2 x Grab Hooks (Shorteners): G80, WLL 2T
2 x 1m, 8mm Chain: G80, WLL 2T
2 x Clevis Hook: G80, WLL 2T
1 x ID Tag
-
£88.20
✔ In Stock: 2
US3236 US Pro 20 Piece Metric Ratchet Spanner Wrench Set. Supplied with a hard case with a handle. 72 Teeth ratchet drive. Supplied with 1/4″, 3/8″ and 1/2″ drive adapters.
- Sizes: 8mm | 9mm | 10mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 18mm | 19mm | 21mm | 22mm | 24mm | 27mm | 30mm | 32mm
-
£10
✔ In Stock: 14
US6772 US Pro 20pc Radio Removal Tool Set. For Removing or installing in-car entertainment systems.
4pc – No. 1 L and NO.1 R – VW-AUDI, MERCEDES BENZ, RENAULT, ALPINE, BECKER
2pc – No. 2 MERCEDES BENZ, PORSCHE, BECKER
2pc – No. 3 VW
2pc – No. 4 BECKER
2pc – No. 5 SKODA
1pc – Allen Hex Wrench – BMW, OPEL
1pc – Special Pentagon Wrench – BMW
2pc – Radio Removal V-Hook – BLAUPUNKT, PEUGEOT, CLARION
2pc – Radio Removal U Hooks – ALFA, FIAT, FORD, PSA, RENAULT, VW-AUDI, BLAUPUNKT, GRUNDIG, VDO
2pc – Radio Removal Keys – JVC, PIONEER
-
£16.27
✔ In Stock: 6
US8423 US Pro 3” Air Cut Off Tool. Durable lightweight aluminium casing, 180 degree stainless steel guard. Safety trigger.
- Free Speed: 20,000 RPM
- Capacity: 3″ 76.2mm
- Air Inlet: 1/4″ NPT or BSP
- Average Air Consumption: 5.5 CFM
- Working Pressure: 90psi / 6.2bar
- Length: 190mm
-
£50.82
✔ In Stock: 6
US7065 US Pro 30pc Cup Type Oil Filter Wrench Set. 3 – Jaw Wrench 65-120mm. Adaptor 1/2(F) N 3/8(M) Square Drive Tool.
- 66mm-6F = Fiat Punt 1.2, Renault Clio 1.2, Rapid, Twingo
- 65mm-14F = Daihatsu, Toyota, Nissan, Fiat
- 65/67mm-14F = Daihatsu, Toyota
- 68mm-14F = Mazda, Ford, Subaru
- 73mm-14F = Toyota, Lexus
- 74mm-15F = Audi, Rover, Chrysler
- 74/76mm-15F = Ford, Opel, VW, Audi, Mercedes
- 75/77mm-15F = VW, Audi, Isuzu, Mercedes
- 76mm-12F = Fiat, Mercedes, Renault
- 76mm-14F = VW, Porsche, Mercedes-Benz, BMW, Audi, Opel
- 76mm-30F = Ford
- 76mm-8F = Fiat, Lancia
- 78mm-15F = Nissan, Ford, Toyota
- 80mm-15F = Nissan, Honda, Opel, Mazda
- 80/82mm-15F = Subaru, Toyota, Honda, Nissan
- 86mm-16F = Volvo
- 86mm-18F = VW Golf, Audi A6 TDI, Peugeot, Citroen
- 90mm-15F = Honda, Mitsubishi, Isuzu
- 92mm-10F = Fiat
- 93mm-15F = Mazda, Volvo, Mitsubishi, Nissan, Honda
- 93mm-36F = Ford
- 93mm-45F = VW, Audi TDI
- 95mm-15F = Toyota, Alfa, Ford
- 96mm-18F = Audi A4, A6 TDI, VW Passat, Renault Laguna
- 100mm-15F = Isuzu, Mitsubishi
- 106mm-15F = Fiat Ducato
- 108mm-15F = Volvo
- 108mm-18F = Renault Espace, Laguna, Safrane, Traffic
-
£12.07
✔ In Stock: 3
US5586 US Pro 3pc 3/8” Dr. Oxygen/Vacuum Sensor Socket Set. Chrome vanadium steel, heat-treated for strength and durability. Contains 3 most popular oxygen and vacuum switch sockets.
- 1 x Vacuum Switch Socket 3/8″ Dr. x 7/8″ x 80mm. Designed to remove and install oxygen sensors. Socket designed with slot which allows clearance of wire. Designed to be used with 3/8″ drive tool or 1″ wrench / spanner.
- 1 x Heated Oxygen Sensor Socket 3/8″ Dr. 7/8″ x 50mm. Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2″ for easy access.
- 1 x Offset Oxygen Sensor Wrench 3/8″ x 7/8″ x 30mm. Low profile design for use in tight spaces. Designed to be used with 3/8″ drive tool.
-
£14.17
✖ Out of Stock
US2604 US Pro 3pc HSS Cone Step Drill Set 4 – 32mm. HSS 4241 DIN 338. Fully polished, can be used on various materials including metal, stainless steel, aluminium, copper, iron, nickel, steel etc… Supplied in a metal case.
- Size 1: 4mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 18mm | 20mm | 22mm | 24mm | 26mm | 28mm | 30mm | 32mm
- Size 2: 4mm | 6mm | 8mm | 10mm | 12mm | 14mm | 16mm | 18mm | 20mm | 22mm
- Size 3: 4mm | 6mm | 8mm | 10mm | 12mm
-
£176.09
✔ In Stock: 2
US9111 US Pro 4 Leg Chain Sling 2m, 10mm G80 6.7 Tonne – Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 6.7 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened.
1 x Master Link: WLL 6.7T
4 x Connector Link: G80, WLL 3.15T
4 x Grab Hooks (Shorteners): G80, WLL 3.15T
4 x 2 Metre 10mm Chain: G80, WLL 3.15T
4 x Clevis Hook with Cast Latch: G80, WLL 3.15T
1 x ID Tag
-
£132
✔ In Stock: 4
US9110Â US Pro 4 Leg Chain Sling 2m, 8mm G80 4.25 Tonne Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 4.25 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened.
1 x Master Link: WLL 4.25T
4 x Connector Link: G80, WLL 2T
4 x Grab Hooks (Shorteners): G80, WLL 2T
4 x 2 Metre 8mm Chain: G80, WLL 2T
4 x Clevis Hook: G80, WLL 2T
1 x ID Tag
-
£3
✔ In Stock: 20
US5034 US Pro 4pc Short Mini Pick & Hook Set. Overall Length: 135mm (approx.)
– 1 x 90 Degrees
– 1 x 135 Degrees
– 1 x 180 Degrees
– 1 x 75 Degrees
-
£27.83
✔ In Stock: 12
US3223 US Pro 5pc Aviation Extra Long Double Ring Spanner Set. Extra long slim shafts. Mirror polished. Hardened and tempered. Ring head extends out from the shaft on one side. Double hex ring spanner on either end. Manufactured from the highest quality chrome vanadium steel 6140. Supplied in a canvas storage pouch.
8 x 10mm (Approx. Length: 234mm)
11 x 13mm (Approx. Length: 329mm)
14 x 15mm (Approx. Length: 369mm)
16 x 17mm (Approx. Length: 409mm)
18 x 19mm (Approx. Length: 409mm)
-
£2.63
✖ Out of Stock
US6697 US Pro 6″ Heavy Duty Magnetic Parts Bowl Rubber Non Scratch Base. Stainless steel magnetic bowl. Size: 6″ x 1″
-
£14.50
✔ In Stock: 5
US3528 US Pro 7pc Double Offset Ring Spanner Set 6 – 19mm 75 Degree. A set of double ended ring spanners with a 75 degree offset. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Mirror polish & Non-slip finish. Supplied with storage pouch.
- Sizes: 6 x 7mm, 8 x 9mm, 10 x 11mm, 12 x 13mm, 14 x 15mm, 16 x 17mm and 18 x 19mm
-
£60
✔ In Stock: 3
Chrome molybdenum steel used for applications that. Command high torque rates. Chemically blacked, 6 point hardened & tempered impact sockets. Phosphate finish to assist with corrosion resistance. Drilled head to facilitate retaining pin. For use with air impact wrenches.Â
- Sizes: 24mm | 27mm | 29mm | 30mm | 32mm | 33mm | 36mm | 38mm
-
£40
✔ In Stock: 10
US1386 US Pro 3/4″ 8pc Single Hex 6 Point Deep Impact Socket Set. Manufactured from Chrome Vanadium Steel HRC42-45 with blackened finish for maximum durability. Supplied in blow moulded storage case with handle.
- Sizes: 24m | 27mm | 29mm | 30mm | 32mm | 35mm | 36mm | 38mm
- 3/4 Inch Drive
- Length: 75mm
-
£9.46
✔ In Stock: 6
US3654 US Pro 8pc 3/8″ Dr. Extra Long Impact Star Torx Bit Socket Set. An eight piece set of extra long Star bit sockets for use with torx products. Phosphate finish, CR-V sockets with hardened S2 bits for enhanced durability, 3/8″ Dr. so will fit any 3/8″ Dr. ratchets / bars / extensions etc…
- Contents: T25 | T27 | T30 | T40 | T45 | T50 | T55 | T60
- Length: 110mm
