Showing 151–175 of 418 results
-
£84.31
✔ In Stock: 1
Wheel Bearing and Seal Installation Kit. New lightweight design for the installation of bearings without damaging the bearing or housing. Contains 3 metal bearing drift sleeves and 34 nylon drifts with Deadblow Hammer. Can also be used to install oil seals. Fits most sizes of bearing and seals found on modern vehicles.
Drift Sleeve Diameters: 25mm | 40mm | 60mm
Drift Sleeve Length: 220mm
Nylon Drift Diameter: 26mm | 28mm | 30mm | 32mm x 2 | 35mm x 3 | 37mm | 40mm | 42mm x 2 | 47mm x 3 | 52mm x 2 | 55mm | 60mm | 62mm x 3 | 68mm | 72mm x 2 | 75mm | 80mm x 2 | 82mm | 85mm | 90mm x 2 | 100mm | 110mm
-
£5.90
✔ In Stock: 4
38mm 1″ Dr. Impact Socket
-
£6.13
✔ In Stock: 2
38mm Impact Socket 3/4″ Drive.
-
£18
✔ In Stock: 4
38mm – Combination Spanner with Polished Finish.
-
£90
✔ In Stock: 4
- 38 Piece Impact Socket Set
- 6 Point Surface Drive
- Sizes: 8 – 24mm | 3/8” – 1-1/4”
- Standard & Deep
- With 2 x 75mm Extension Bars 3/8” & 1/2” Drive & 1/2” – 3/8” Drive Adaptor
-
£13.75
✔ In Stock: 3
39mm – Combination Spanner with Polished Finish.
-
£15.60
✖ Out of Stock
3 Piece Impact Socket Set with thin wall and protective sleeves are designed to protect your rims from scratches and other damage while removing wheel nuts.
- Chrome Molybdenum Steel Construction For Durability
- Thin Walls & Protective Sleeves To Protect Your Alloy Wheel Rims
- Socket Sizes: 17mm, 19mm & 21mm
- 1/2” Drive
-
£3.36
✔ In Stock: 18
This 3 piece detail brush set is specially designed to clean every awkward and hard to reach area inside vehicle.
Includes the following:
1 x dash, console and crevice brush to remove dirt, dust, and grime from all hard to reach areas.
1 x two prong felt edged brush to detail all vent areas.
1 x soft bristles brush with rubber shared top end for wax removal and cleaning of crevices and seams.
-
£14.59
✔ In Stock: 4
Sizes: 64mm | 73mm | 74mm For Toyota Vehicles From 1983 – 2006, use with a 22mm socket or spanner.
-
£207.40
✔ In Stock: 3
4 In 1 Power Garden Trimming Tool Set: Hedge Trimmer | Brush Cutter / Strimmer | Long Reach Chain Saw
Petrol Engine Displacement: 52cc
Max. Engine Speed: 9500/min
Fuel Tank: 1200ml
Engine Idling Speed : 3000/min
Clutch Engagement Speed: 3910/min
Max. Engine Power: 1.45kW
Brush Cutter
Cutting Diameter: 1.4 x 255mm
Cutting Blade: 3T
Hedge Trimmer
Cutting Wide: 24mm
Cutting Range: 430mm
Type Of The Hedge Trimmer Blade: Double
Grass Trimmer
Cutting Diameter: 430mm
Max. Strimmer Line diameter: 2.5mm
Pruning Pole
Cutting Length: 10in. / 25cm
Supplied With Safety Gear Starter Pack
-
£160.55
✔ In Stock: 3
2m / 4 Leg / 4 Ton Chain Sling
- Material: 20CrNiMo Alloy Steel
- CE Approved
-
£50
✔ In Stock: 4
- 4 Ton Hand Puller / Winch
- 3 Hooks
- Max. Cable Length: 3m
- Cable Diameter: 6mm
- Safe & Secure Pulley System With One Hand Operation
-
£9.85
✔ In Stock: 3
- 40 Plastic Rivets
- 4 Assorted Sizes
- Suitable For Use With CT0854
-
£18
✔ In Stock: 3
40mm – Combination Spanner with Polished Finish.
-
£21
✔ In Stock: 4
41mm – Combination Spanner with Polished Finish.
-
£21.82
✔ In Stock: 2
- 4 x 1 Pin Male Connectors
- 4 x 2 Pin Male Connectors
- 6 x 3 Pin Male Connectors
- 3 x 4 Pin Male Connectors
- 3 x 5 Pin Male Connectors
- 2 x 6 Pin Male Connectors
- 100 x Male Terminals
- 180 x Terminals With Yellow Seals
- 4 x 1 Pin Female Connectors
- 4 x 2 Pin Female Connectors
- 6 x 3 Pin Female Connectors
- 3 x 4 Pin Female Connectors
- 3 x 5 Pin Female Connectors
- 2 x 6 Pin Female Connectors
- 100 x Female Terminals
-
£26
✔ In Stock: 4
44mm – Combination Spanner with Polished Finish.
-
£29
✔ In Stock: 4
46mm – Combination Spanner with Polished Finish.
-
£7.50
✔ In Stock: 40
Air Blow Gun / Air Duster – 480mm With 19″ / 480mm Angled Nozzle.
-
£16.24
✔ In Stock: 4
4pc 3/8” Dr. Spark Plug Socket Set with Universal Joint is designed to suit a variety of spark plugs, this set includes 4 different socket sizes (14mm, 16mm, 18mm, and 21mm). Spark plug accessibility and removal in confined spaces are made simple by the 3/8in. drive with universal joint. Durability and strength are provided by the chrome vanadium construction.
-
£34.08
✔ In Stock: 2
- 4 Piece Circlip / Snap Ring Pliers Set
- 13” / 325mm With Straight & 90 Degree Tips
-
£11
✔ In Stock: 24
The CT2798. This set of four scrapers includes sizes of 19mm, 22mm, 25mm, and 38mm by 270mm, perfect for a variety of tasks. The scrapers are made of high-quality plastic. Ideal for removal of glued weights on aluminium rims. Suitable for removing trim from bodywork.
- Sizes: 19mm, 22mm, 25mm, and 38mm by 270mm
- Material: High Quality Plastic
-
£70
✔ In Stock: 4
- Straps: 4 x 4m
- Strap Load Capacity: 2.5 Ton
- Strap Breaking Strain: 5 Ton
- Round Slings: 4 x 0.5m
- Sling Load Capacity: 1 Ton
- Sling Breaking Strain: 7 Ton
-
£65.40
✔ In Stock: 4
Track Rod End Remover / Installer Set – 4pc. For easy removal and replacement of the inner steering ball joint without the need to dismantle the steering rack from the bulkhead.
Drive Head Range:
– 30 – 35mm Diameter
– 35 – 40mm Diameter
– 40 – 45mm Diameter
-
£55
✔ In Stock: 9
50 Pack Disposable Paint Spray Gun Cup Liners and Lid Kit 600ml
- Kit includes 50 cup liners, 50 lids with built-in 125-micron fluid strainers, 1 hard cup with retainer ring and 20 cup sealing plugs.
- Works excellent with all types of paints, primers, epoxies, and commercial coatings. Use the cup system with automotive paint basecoats, clearcoats, topcoats and primers, as well as with stains, sealers, gel coats, varnishes, urethanes, enamels, and lacquers.
- Reduce your paint material waste and cleaning solvent waste, while at the same time eliminating the cost and labor associated with cleaning traditional metal gun cups and the need for mixing cups and paint cans.
