Showing 76–100 of 418 results
SKU: CT3066
✔ In Stock: 12
A battery hydrometer is a tool used to measure the specific gravity (SP) of the electrolyte in a lead-acid battery. This measurement helps determine the state of charge and health of the battery. The specific gravity of the electrolyte changes depending on whether the battery is charged or discharged, and it can also be affected by temperature.
SKU: CT3064
✖ Out of Stock
The 6-12V Circuit Tester is a simple yet essential tool for diagnosing electrical issues in automotive systems. Designed for quick and easy voltage checks, this tester is perfect for both professional mechanics and DIY enthusiasts.
SKU: CT3006
✔ In Stock: 1
14pc Diesel Compression Test Set Supplied with Gauge and Adaptors Gauge reads 0-1000psi and 0-70bar with 368mm Hose and Release Valve.
SKU: CT2936
✔ In Stock: 1
SAC Clutch Alignment Tool Set Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool to allow the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors.
– Clutch Plate Adaptors: 17.8mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm | 22.9mm | 23mm | 25.9mm | 27.9mm | 31.9mm | 33.9mm
– Spigot Adaptors: 13.9mm | 14.9mm | 15.9mm | 16.9mm | 17.9mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm
– Assembly Flywheel Threads: 6 x 1.00mm | 7 x 1.00mm | 8 x 1.25mm
SKU: CT2935
✔ In Stock: 2
2m Fluid Transfer Pipe No need for mouth contact. Liquid flow can be controlled. Works in shallow containers. Simple and long lasting construction.
Liquid Transfer (With 2m PVC Pipe, Thickness 2.5mm)
SKU: CT2841
✖ Out of Stock
10pc Star E-Socket Set With 3/8″ F to 1/4″ M Drive Adaptor.
– 1/4″ Sizes: E4 | E5 | E6 | E7
– 3/8″ Sizes: E8 | E10 | E11 | E12 | E14
SKU: CT2835
✔ In Stock: 5
Analogue Multimeter rectifier type / permanent magnet moving coil instrument for measurements of – DC voltage / AC voltage / DC current / Resistance / Battery and Decibels. Operates at an ambient temperature from 0 degrees C to 50 degrees C with a relative humidity of less than 85%
SKU: CT2757
✔ In Stock: 5
Cylinder Hone with 75mm / 3″ Abrasive Stones. Flexible shaft for ease of use and self centring.
– Range: 51 – 177mm / 2 – 7″ Bore Diameter
SKU: CT2756
✔ In Stock: 2
Brake Cylinder Hone 20 – 64mm | 3/4 – 2-1/2″ Diameter. Flexible shaft for ease of use and self centring.
SKU: CT2588
✔ In Stock: 1
7pc Hose Clip Pliers Set For removal and locking clips into open position. Allows for removal of plastic and / or metal self-tightening hose clips. Flexible Hose Clip Pliers for replacing fuel / oil and water hose. Ideal for confined spaces.
– 1 x Hose Clip Pliers
– 1 x Swivel Jaw Spring Wire Clip Pliers
– 1 x Swivel Jaw Spring Band Clip Pliers
– 1 x Flat Band Clip Pliers
– 1 x Angled Flat Band Clip Pliers
– 1 x Hose Remover Pliers
– 1 x Clic-R Collar Pliers
SKU: CT2470
✖ Out of Stock
Wire Brush with Wooden Handle General Purpose Wire Hand Brush for the removal of rust / debris from a variety of surfaces.
SKU: CT2415
✔ In Stock: 53
80 Piece automotive fuse assortment box.
SKU: CT2374
✔ In Stock: 6
Air Compressor 12V DC Powered through the 12V automotive socket. With pressure gauge and 3 nozzle adapters. Ideal for inflating tyres / balls / rubber inflatable leisure items.
– Cylinder Diameter: 19mm
– Max. Rated Pressure: 260psi
– Supplied With 2.8m Cord
SKU: CT2367
✔ In Stock: 1
One-person professional pneumatic brake bleeding tool features a large 1.5L canister, aluminium nozzle, and clamp for compressed air. This kit comes with a 1000mm silicone hose and accurately fitting rubber adaptor for the bleeding nipple. 1L canister with shut-off valve and universal clamp for refilling the brake system.
SKU: CT2366
✔ In Stock: 2
9L Pneumatic Fluid Extractor Suitable for extracting oil from vehicles and industrial machinery. Also suitable for low viscosity fluids such as water. May be used with most standard workshop air compressors. Automatic safety shut off mechanism when tank is full. Simple Push Button Use – extract liquids from tanks quickly and easily.
– Working Pressure: 70 – 170psi
– Air Inlet: 1/4″
– Air Consumption: 5cfm
SKU: CT0194
✔ In Stock: 8
32mm Combination Spanner / Satin Finish.
SKU: CT0193
✖ Out of Stock
30mm Combination Spanner / Satin Finish.
SKU: CT0191
✔ In Stock: 4
27mm Combination Spanner / Satin Finish.
SKU: CT0187
✔ In Stock: 8
23mm Combination Spanner / Satin Finish.
SKU: CT0186
✖ Out of Stock
22mm Combination Spanner / Satin Finish.
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now