19mm – Combination Spanner Satin Finish
£3.50SKU: CT0183
✔ In Stock: 23
19mm Combination Spanner / Satin Finish.
Neilsen Tools
Showing 101–125 of 418 results
18mm – Combination Spanner Satin Finish
£3.50SKU: CT0182
✖ Out of Stock
18mm Combination Spanner / Satin Finish.
17mm – Combination Spanner Satin Finish
£3.50SKU: CT0181
✖ Out of Stock
17mm Combination Spanner / Satin Finish.
15mm – Combination Spanner Satin Finish
£3SKU: CT0179
✔ In Stock: 6
15mm Combination Spanner / Satin Finish.
14mm – Combination Spanner Satin Finish
£2.50SKU: CT0178
✔ In Stock: 14
14mm Combination Spanner / Satin Finish.
13mm – Combination Spanner Satin Finish
£2.50SKU: CT0177
✔ In Stock: 9
13mm Combination Spanner / Satin Finish.
12mm – Combination Spanner Satin Finish
£2.50SKU: CT0176
✔ In Stock: 10
12mm Combination Spanner / Satin Finish.
11mm – Combination Spanner Satin Finish
£2.50SKU: CT0175
✔ In Stock: 25
11mm Combination Spanner / Satin Finish.
10mm – Combination Spanner Satin Finish
£2.50SKU: CT0174
✖ Out of Stock
10mm Combination Spanner / Satin Finish.
9mm – Combination Spanner Satin Finish
£2.20SKU: CT0173
✔ In Stock: 2
9mm Combination Spanner / Satin Finish.
8mm – Combination Spanner Satin Finish
£2.20SKU: CT0172
✔ In Stock: 15
8mm Combination Spanner / Satin Finish.
7mm – Combination Spanner Satin Finish
£2SKU: CT0171
✔ In Stock: 8
7mm Combination Spanner / Satin Finish.
6mm – Combination Spanner Satin Finish
£2SKU: CT0170
✔ In Stock: 22
6mm Combination Spanner / Satin Finish.
Truck Socket 8 Point, 100mm 3/4″ Dr. SCANIA
£55SKU: CT6306
✔ In Stock: 1
Positive drive of the axle nut. Any extensive slipping is avoided. Milled out profile. Robust execution.
– 3/4″ Drive
– Inner: 100mm
– Outer: 123mm
– Height: 84mm
– 8 Point
– Applicable: SCANIA Rear Axles Nut
Truck Socket For Scania Front Wheel 83mm 1″ Dr.
£50.57SKU: CT6305
✔ In Stock: 1
1″ Dr. Inner: 83mm | Outer: 103mm | Height: 74mm Positive drive of the axle nut. Any extensive slipping is avoided. Milled out profile. Robust execution. Can be used with an impact wrench or torque wrench. Removal and fitting of the axle nuts in front of the brake disc.
Application Range:
– SCANIA Front Axle (e.g. 124L / 144L), Series 4 From 96 For Vehicles Above 16 Tons
Wheel Chocks Set Including 2pc Holder
£12SKU: CT6229
✔ In Stock: 4
Wheel chock with holder. This part give additional protection for parked trailers.
Used on car trailers, light agricultural trailers, caravans, etc… Thus prevents the trailer from rolling away. With 8pc screws.– Size: 22 x 9 x 11cm
Tyre Brush Deluxe Contoured
£2.96SKU: CT6224
✔ In Stock: 12
Tough bristles for cleaning tires and bumpers. Soft TPR handle is both comfortable and ergonomic. Extension pole attachment feature. Ideal for cleaning tyre after tyre change.
– Size: 11cm x 11cm x 9cm (approx.)
– Weight: 210g (approx.)
– Material: PP & TPR
3pc Car Dash Dashboard Crevice Detail Brush Set
£3.36SKU: CT6222
✔ In Stock: 9
This 3 piece detail brush set is specially designed to clean every awkward and hard to reach area inside vehicle.
Includes the following:
1 x dash, console and crevice brush to remove dirt, dust, and grime from all hard to reach areas.
1 x two prong felt edged brush to detail all vent areas.
1 x soft bristles brush with rubber shared top end for wax removal and cleaning of crevices and seams.
7pc Brake Line Flaring Tool Kit
£135SKU: CT5872
✔ In Stock: 3
The kit is designed to help you easily and accurately flare brake pipes and hydraulic tubing, and can be used on copper, brass, aluminium, and steel pipes. The kit is suitable for both coated and non-coated pipes, and allows for both inside and outside flaring. With four pairs of pressure pieces included in the kit, suitable for use on copper, brass, aluminium, and steel pipes. Works on both coated and non-coated pipes. Allows for inside and outside flaring.
Includes 4 Pairs Of Pressure Pieces: 4.75mm | 6.35mm | 8mm | 9.5mm, As well as 3/16″ | 1/4″ | 5/16″ | 3/8″
Timing Tool Set – Vauxhall / Opel
£46.09SKU: CT5859
✔ In Stock: 1
Vauxhall / Opel Timing Tool Set For Vauxhall / Opel 1.0L / 1.4L / 1.5L Petrol Engines and Turbo Petrol Engines.
– Camshaft Alignment Tool
– Camshaft Alignment Plate
– Balancer Shaft Alignment ToolApplicable To: Adam / Astra K / Corsa-E / Insignia-B / Mokka-X / Viva ( Karl ) 2014 Onwards
Engine Codes:
LE1/B10XFL | LE1/B10XFT | LE1/B10XHL
LE2/B14XHL | LE2/B14XHT | LV7/B14XEOEM Codes:
EN-51298 | EN-51367 | EN-51632
May be used with KMJ38122A
Dual Clutch Reset Tool Set – Ford
£132.83SKU: CT5828
✔ In Stock: 1
Dual Clutch Reset Tool Set – Ford. Designed to reset the twin clutch pack fitted to Ford 6 speed DPS6/6DCT250 transmissions.
Applicable To:
– Ford Transit Connect From 2014
– Fiesta From 2008
– Focus From 2010
– B-Max From 2012
OEM: 307-676
Air Spark Plug Cleaner
£25.31SKU: CT5826
✔ In Stock: 2
Pneumatic Spark Plug Cleaner Supplied with a bag of silicon carbide. For removing carbon residues on spark plugs. Can be fitted to a workbench.
– Air Consumption: 218L/min
– Operating Pressure: 6.2bar / 90psi
– Compressed Air Connection: 1/4″
Brake Pipe Bending Tool
£9.71SKU: CT5697
✔ In Stock: 5
The Brake Pipe Bending tool is designed to bend 5mm diameter brake lines. With its two bending options – tight and open radius bends – Its central 6mm Hex slot provides a secure and stable grip for accurate bends.
10 Ton Hydraulic 3 Legs Gear Puller
£100SKU: CT5648
✔ In Stock: 4
10 Ton Hydraulic Gear Puller. Suitable for pulling hubs / flanges / gears and bearings. Equipped with 3 reversible jaws suitable for different needs. Long operating handle for greater leverage for ease. Pump head rotates 360 degrees for easy operation. Locates the centre of work accurately. Safety flooding valve control switch avoids oil pressure overload.
– Maximum Capacity: 10T
– Maximum Horizontal Pull Distance: 250mm
– Maximum Vertical Pull Distance: 160mm
– Axis Stroke: 50mm
Trailer Hitch/Coupling 50mm Capacity 2000kg
£55SKU: CT5609
✔ In Stock: 7
50mm Trailer Coupling Heavy Duty Nodular Cast Iron with Zinc plated finish. Couples with 50mm diameter ball hitch.
– Width: 75mm
– Capacity: 2000kg