Showing 226–250 of 408 results
SKU: CT1510
✔ In Stock: 11
The Scissor Ball Joint Separator is a specialized tool designed for safely and efficiently removing ball joints from vehicles. Its unique scissor action provides leverage and control, allowing users to separate ball joints without damaging surrounding components. This tool is particularly useful in automotive repair and maintenance, where ball joints need to be replaced or serviced.
SKU: CT3066
✔ In Stock: 95
A battery hydrometer is a tool used to measure the specific gravity (SP) of the electrolyte in a lead-acid battery. This measurement helps determine the state of charge and health of the battery. The specific gravity of the electrolyte changes depending on whether the battery is charged or discharged, and it can also be affected by temperature.
SKU: CT3387
✔ In Stock: 17
The Battery Tester can be used on a variety of 12V batteries, including those found in cars, trucks, motorcycles. The knurled metal body of the tester is easy to grip and the probe tip is covered with a protective screw cap to prevent damage and ensure accuracy. The tester also comes with a cable and alligator earth clip for easy and convenient use.
SKU: CT3266
✔ In Stock: 182
The features a durable, knurled metal body with a convenient test light. The probe tip is covered with a protective screw cap to prevent damage and ensure accurate readings. When voltage is present, the tester illuminates, making it easy to determine whether your battery is fully charged or in need of a charge.
SKU: CT2134
✔ In Stock: 5
The CT2134 is a digital battery load tester designed for 12V DC lead acid batteries. It can test the battery’s voltage, load capacity, and starter current draw in just 10 seconds, making it a fast and convenient tool for checking the condition of your battery. 125A digital battery load tester for 12V DC lead-acid batteries. Quick and easy to use with digital display and battery condition LED’s. Inbuilt starter crank test procedure and CCA setting 200 – 1000. Heavy duty insulated clamps. Test for excessive starter current draw. Test for trucks and cars. Test for charger. Test for battery voltage.
SKU: CT4385
✔ In Stock: 16
Bicycle puncture repair kit. Complete puncture repair set in a handy case. Ideal for quick and easy repairs on the move.
– 2 x Levers
– Steel Rasp
– Rubber Glue – 6g
– 2 x Valve Cores
– 2 x Valve Covers
– 4 x Cold Patches
SKU: CT1137
✔ In Stock: 2
Block tester powder and bottle. For use with Block Tester Kit CT1133 and CT3923
SKU: CT1133
✔ In Stock: 2
With Block Tester Powder. Detects exhaust gasses in radiators and so checks for gasket damage or cracked and warped cylinders. Works with Petrol engines. Not recommended for Diesel vehicles.
SKU: CT4746
✔ In Stock: 5
Brake or clutch bleeding system. One-man bleeding system requiring no external power source. Reservoir holds 2.5 litres of hydraulic fluid – flush entire system with one fill without the risk of running the reservoir dry. Pressure range makes unit suitable for use with ABS systems. Fitted with 42mm diameter cap with 90 degree angled connector which is suitable for most European vehicles.
SKU: CT3934
✔ In Stock: 4
Disc Brake Ratchet Pad Spreader. The ratchet allows a full 360 degree swing so that the spreader may be placed at any position. A centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of Pistons. Allows work on twin and quad Piston fixed Callipers as well as single and twin Piston floating Callipers. Bi-directional ratchet allows ease of use from spreading to retracting.
SKU: CT2756
✔ In Stock: 1
Brake Cylinder Hone 20 – 64mm | 3/4 – 2-1/2″ Diameter. Flexible shaft for ease of use and self centring.
SKU: CT2757
✔ In Stock: 5
Cylinder Hone with 75mm / 3″ Abrasive Stones. Flexible shaft for ease of use and self centring.
– Range: 51 – 177mm / 2 – 7″ Bore Diameter
SKU: CT4853
✔ In Stock: 1
1L Brake Fluid Bleed Bottle With holding chain and hook. Variable length bleeding hose. Bleeding nipple adaptor.
SKU: CT3686
✔ In Stock: 1
The is designed to quickly and cleanly bleed or replace your brake fluid system without the need for specialized brake reservoir caps. This kit comes with a fluid supply bottle and flexible rubber joint for fluid extractions. Uses standard workshop air supply of 90 to 120psi. Quick clean and efficient operation. New fluid bottle adaptors set for different master cylinders. Flexible rubber joint for fluid extractions.
SKU: CT5697
✔ In Stock: 7
The Brake Pipe Bending tool is designed to bend 5mm diameter brake lines. With its two bending options – tight and open radius bends – Its central 6mm Hex slot provides a secure and stable grip for accurate bends.
SKU: CT1522
✔ In Stock: 16
10pc Pipe Flaring Kit
Steel Compressor Yoke
Flaring Tool
Flaring Dies: 5, 6, 8, 10, 12, 14, 16mm
SKU: CT3414
✔ In Stock: 2
The Brake Pressure Bleeder Kit tool allows you to bleed or replace brake fluid without the need for an additional person, can be pre-charged with compressed air, making it easy to use in places where no compressed air connection is available. With a working pressure of 0.7 – 2.8bar (10 – 40psi) and an air consumption of 128L/min at 2.1bar (4.5CFM at 30psi).
– Contains 15pc Adaptor Set For Many European, Japanese, American Vehicles
– Suitable For ABS Systems
– Suitable For Brake Fluids: DOT 3, DOT 4, DOT 5, DOT 5.1
– Working Pressure: 0.7 – 2.8bar (10 – 40psi)
– Air Consumption: 128L/min at 2.1bar (4.5CFM at 30psi)
– Tank Capacity: 5.5L
– Air Inlet: 6.3mm (1/4″)
– Filling Hose Length: 5.3m (approx.)
SKU: CT4398
✔ In Stock: 3
The Drum Brake Spring Pliers are suitable for most vehicle drum brakes. One end grips onto the brake lining while the other hooks onto the spring, allowing for easy removal, Plier Length 220mm.
SKU: CT1847
✔ In Stock: 86
Castor wheel 100mm flattened universal with brake.
SKU: CT0310
✔ In Stock: 2
Cement / Concrete Mixer with Electric Motor.
SKU: CT0969
✔ In Stock: 2
Chain with 2 Clevis Hooks
Chain Length: 6m Length
Working Load: 3.15T
Suitable for Towing / NOT Lifting
Supplied with Canvas Storage Bag
SKU: CT2729
✔ In Stock: 5
Impact Drill 230V / 800W / 50Hz With Adjustable Handle and Chuck Key.
SKU: CT3355
✔ In Stock: 43
Sharpening Stone – Cigar Shape, Long 300mm, Aluminium Oxide, Ideal For Sharpening Knives / Chisels & Garden Tools.
Battery Acid Hydrometer
1 × £2.69 