“Brake Pipe Flaring Tool Kit 10pc” has been added to your cart.
View cart
Showing 226–250 of 418 results
-
£162.85
✔ In Stock: 1
SAC Clutch Alignment Tool Set Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool to allow the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors.
– Clutch Plate Adaptors: 17.8mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm | 22.9mm | 23mm | 25.9mm | 27.9mm | 31.9mm | 33.9mm
– Spigot Adaptors: 13.9mm | 14.9mm | 15.9mm | 16.9mm | 17.9mm | 18.9mm | 19.9mm | 20.9mm | 21.9mm
– Assembly Flywheel Threads: 6 x 1.00mm | 7 x 1.00mm | 8 x 1.25mm
-
£50.29
✔ In Stock: 1
Master Bearing Race and Seal Driver. Aluminium all in one self contained precision driver with rotating handle and expanding jaws to seat races / bearings or seals with ease.
Variable Jaws cover a range of 18.5 – 89mm or 0.72 – 3.50″
-
£5
✔ In Stock: 93
Antifreeze & Coolant Tester. Easy read scale and pointers. Calibrated in degrees C and F. Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength. Tests Ethylene Glycol strength while the engine is hot or cold. Composite body and rubber bulb for workshop durability.
-
£22
✔ In Stock: 12
Used to remove and install suspension struts while leaving the hub on the vehicle, designed to keep the suspension hubs separate and open. The double ended design allows suspension strut split spreader to be used with the larger upper hub and the lower ball jointed hub to be split, not easy to break. Expertly designed to split the steering knuckle hub, enhancing your vehicle’s suspension and braking performance.
-
£6
✔ In Stock: 4
The 6-12V Circuit Tester is a simple yet essential tool for diagnosing electrical issues in automotive systems. Designed for quick and easy voltage checks, this tester is perfect for both professional mechanics and DIY enthusiasts.
-
£16.69
✔ In Stock: 5
Ball Joint Separator
Scissor Type
Jaw Depth: 20 – 50mm
Jaw Opening: 19mm
-
£16
✔ In Stock: 10
The Scissor Ball Joint Separator is a specialized tool designed for safely and efficiently removing ball joints from vehicles. Its unique scissor action provides leverage and control, allowing users to separate ball joints without damaging surrounding components. This tool is particularly useful in automotive repair and maintenance, where ball joints need to be replaced or serviced.
-
£120
✔ In Stock: 2
21 Piece master adaptor set ball joint service kit. With 4 wheel drive adaptors. Brake anchor pin removal and installation. This tool kit is designed for use on all cars and light trucks that have press-fit type ball joints without the need to remove the control arm from the vehicle. For servicing universal joints on most cars / vans and light trucks.
– C-Frame & Forcing Screw
– Installation Adaptor
– Removal Adaptor
– Installation Cups
– Removal Cups
– Receiving Tubes
-
£2.69
✔ In Stock: 90
A battery hydrometer is a tool used to measure the specific gravity (SP) of the electrolyte in a lead-acid battery. This measurement helps determine the state of charge and health of the battery. The specific gravity of the electrolyte changes depending on whether the battery is charged or discharged, and it can also be affected by temperature.
-
£6.50
✔ In Stock: 60
The CT3719 Battery Terminal Cut Off Switch is a universal car battery isolator cut-off switch designed to fit standard round post batteries. With its easy-to-use design, you can quickly disconnect the battery when you’re not using your car, ensuring it won’t go dead while it’s idle.
- Easy to install and operate,
- Compatible with standard round post batteries,
- The switch can disconnect the battery quickly and easily,
- Prevents the battery from going dead while the car is idle.
-
£8
✔ In Stock: 28
The Battery Tester can be used on a variety of 12V batteries, including those found in cars, trucks, motorcycles. The knurled metal body of the tester is easy to grip and the probe tip is covered with a protective screw cap to prevent damage and ensure accuracy. The tester also comes with a cable and alligator earth clip for easy and convenient use.
-
£3.50
✔ In Stock: 143
The features a durable, knurled metal body with a convenient test light. The probe tip is covered with a protective screw cap to prevent damage and ensure accurate readings. When voltage is present, the tester illuminates, making it easy to determine whether your battery is fully charged or in need of a charge.
-
£36.68
✔ In Stock: 5
The CT2134 is a digital battery load tester designed for 12V DC lead acid batteries. It can test the battery’s voltage, load capacity, and starter current draw in just 10 seconds, making it a fast and convenient tool for checking the condition of your battery. 125A digital battery load tester for 12V DC lead-acid batteries. Quick and easy to use with digital display and battery condition LED’s. Inbuilt starter crank test procedure and CCA setting 200 – 1000. Heavy duty insulated clamps. Test for excessive starter current draw. Test for trucks and cars. Test for charger. Test for battery voltage.
-
£4
✔ In Stock: 10
Bicycle puncture repair kit. Complete puncture repair set in a handy case. Ideal for quick and easy repairs on the move.
– 2 x Levers
– Steel Rasp
– Rubber Glue – 6g
– 2 x Valve Cores
– 2 x Valve Covers
– 4 x Cold Patches
-
£7.52
✔ In Stock: 2
Block tester powder and bottle. For use with Block Tester Kit CT1133 and CT3923
-
£50
✔ In Stock: 1
With Block Tester Powder. Detects exhaust gasses in radiators and so checks for gasket damage or cracked and warped cylinders. Works with Petrol engines. Not recommended for Diesel vehicles.
-
£14
✔ In Stock: 2
Brake Calliper File – 150mm Blade
-
£20
✔ In Stock: 21
Disc Brake Ratchet Pad Spreader. The ratchet allows a full 360 degree swing so that the spreader may be placed at any position. A centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of Pistons. Allows work on twin and quad Piston fixed Callipers as well as single and twin Piston floating Callipers. Bi-directional ratchet allows ease of use from spreading to retracting.
-
£10
✔ In Stock: 3
Brake Cylinder Hone 20 – 64mm | 3/4 – 2-1/2″ Diameter. Flexible shaft for ease of use and self centring.
-
£17
✔ In Stock: 3
Cylinder Hone with 75mm / 3″ Abrasive Stones. Flexible shaft for ease of use and self centring.
– Range: 51 – 177mm / 2 – 7″ Bore Diameter
-
£9.71
✔ In Stock: 7
The Brake Pipe Bending tool is designed to bend 5mm diameter brake lines. With its two bending options – tight and open radius bends – Its central 6mm Hex slot provides a secure and stable grip for accurate bends.
-
£16
✔ In Stock: 10
10pc Pipe Flaring Kit
Steel Compressor Yoke
Flaring Tool
Flaring Dies: 5, 6, 8, 10, 12, 14, 16mm
