Shop

Showing 1–25 of 1573 results

  • Silverline ‘A’ Frame Caution Wet Floor Sign

    0 out of 5
    £12.36

    Available on backorder

    Washable plastic construction. ‘A’ frame design. Brightly coloured for visibility. Warns people of spills and slip hazards.

    Add to cartDone

  • Silverline 1/2″ Flush Trim Cutter

    0 out of 5
    £11.36

    Available on backorder

    TCT cutting edges. Strong, hardened steel shanks. Twin fluted for smooth finish. For trimming laminated boards and veneers and template routing. Max 13,000rpm.

    Add to cartDone

  • Silverline 1/2″ Straight Imperial Cutter

    0 out of 5
    £8.26

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming. Max 10,000rpm.

    Add to cartDone

  • Silverline 1/2″ Straight Metric Cutter

    0 out of 5
    £5.28

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/2″ TCT Panel Door Bit Set 3pce

    0 out of 5
    £69.27

    Available on backorder

    Comprehensive panel door 1/2″ shank router cutter set with TCT cutting edges and strong, hardened steel shanks. Includes 2 x 1/2″ rail and stile bits, and 1 x 1/2″ raised panel bit.

    Add to cartDone

  • Silverline 1/2″ TCT Router Bit Set 12pce

    0 out of 5
    £36.53

    Available on backorder

    TCT cutting edges and strong, hardened steel shanks. Includes: Straight: 6 x 20mm, 12 x 20mm, 16 x 20mm; 90° grooving: D12.7mm; Dovetail: D12.7mm; 45° chamfer: D32mm; Bearing flush trim: 12.7 x 13mm; Rounding over: R6.3mm D22.2mm, R9.5 D28.6mm; Cove box: R6.3 D12.7mm; Cove: R6.3 D22.2mm; Roman ogee: R4 D25.5mm.

    Add to cartDone

  • Silverline 1/2″ TCT Router Bit Set 30pce

    0 out of 5
    £103.78

    Available on backorder

    TCT cutting edges and strong, hardened steel shanks. Includes straight bits 5, 6, 8, 10, 12, 14, 16, 18 and 20mm, dovetail 12.7mm, V-groove 9.5mm and 12.7mm, R6.3mm cove box R3.2mm and R6.3mm, classical 12.7mm, flush trim 12.7mm, chamfer 16mm and 32mm, roman ogee R4mm, rebater 28.6mm, cove bit R9.5mm, rounding over R3.2mm, R6.3mm, R7.9mm and R9.5mm, beading cutter R3.2mm, R6.3mm, R7.9mm and R9.5mm

    Add to cartDone

  • Silverline 1/3 Sanding Sheets 10pk

    0 out of 5
    £2.50

    Out of Stock

    Aluminium oxide. Heavyweight and pre-cut to fit all 1/3 sheet (93 x 190mm) clip sanding machines. Sheet size (non-hook loop): 95 x 230mm.

    Read moreDone

  • Silverline 1/3 Sanding Sheets 10pk

    0 out of 5
    £2.50

    Available on backorder

    Aluminium oxide. Heavyweight and pre-cut to fit all 1/3 sheet (93 x 190mm) clip sanding machines. Sheet size (non-hook loop): 95 x 230mm.

    Add to cartDone

  • Silverline 1/3 Sanding Sheets 10pk

    0 out of 5
    £2.50

    Available on backorder

    Aluminium oxide. Heavyweight and pre-cut to fit all 1/3 sheet (93 x 190mm) clip sanding machines. Sheet size (non-hook loop): 95 x 230mm.

    Add to cartDone

  • Silverline 1/4″ Biscuit Cutter

    0 out of 5
    £10.97

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For biscuit joints, slots and grooves. Max 12,000rpm. Use 13mm bearing for No. 20 biscuits and 19mm bearing for No.10 biscuits.

    Add to cartDone

  • Silverline 1/4″ Flush Trim Cutter

    0 out of 5
    £5.72

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For trimming laminated boards and veneers, and template routing.

    Add to cartDone

  • Silverline 1/4″ Flush Trim Cutter

    0 out of 5
    £6.41

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For trimming laminated boards and veneers, and template routing.

    Add to cartDone

  • Silverline 1/4″ Straight Imperial Cutter

    0 out of 5
    £13.30

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank.Single flute for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £3.36

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £2.76

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £3.72

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £11.67

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £3.03

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £5.04

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £4.28

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ Straight Metric Cutter

    0 out of 5
    £10.95

    Available on backorder

    TCT cutting edge. Strong, hardened steel shank. Single fluted for smooth finish. For general routing, grooving, rebating, dados, mortising and edge trimming.

    Add to cartDone

  • Silverline 1/4″ TCT Router Bit Set 12pce

    0 out of 5
    £25.95

    Available on backorder

    TCT cutting edges and strong, hardened steel shanks. Includes: Straight: 6 x 20mm, 12 x 20mm, 16 x 20mm; 90° grooving: 12.7mm; 45° Dovetail: 12.7mm; 45° chamfer: 32mm; Bearing flush trim: 12.7 x 13mm; Rounding over: R6.3 D22.2mm, R9.5 D28.6mm; Cove box: R6.3 D12.7mm; Cove: R6.3 D22.2mm; Roman ogee: R4 D25.5mm.

    Add to cartDone

  • Silverline 1/4″ TCT Router Bit Set 24pce

    0 out of 5
    £70.80

    Available on backorder

    TCT cutting edges and strong, hardened steel shanks. Includes: mortice: D12.7mm; combi bevel: D12.7mm; dovetail: D9.5 & 12.7mm; 90° grooving: D12.7mm; round nose: D9.5 R4.76mm & D12.7 R6.35mm; trimming: D22mm; panel pilot: D6.35mm; straight: D6.35, 9.5, 12.7 & 19.05mm; bearing flush trim: D12.7mm; round over: R3.17 D19.05mm, R4.76 D22.2mm, R6.35 D25.4mm, R95 D31.7mm; cove: R6.35 D22.2mm, R9.52 D28.6mm; Roman ogee: R3.96 D25.4mm; 45° chamfer: D30mm; slot cutter: D6.35mm; rabetting D12.7mm.

    Add to cartDone

  • Silverline 1/4″ Template Cutter

    0 out of 5
    £5.62

    Available on backorder

    TCT cutting edges. Strong, hardened steel shank. Twin fluted for smooth finish. For template routing.

    Add to cartDone

End of content

End of content