“VAG Diesel Engine Timing Kit For 1.4 – 1.6 – 2.0 TDI CR” has been added to your cart.
View cart
Showing 2801–2825 of 2848 results
-
£47.26
✔ In Stock: 1
Instruction booklet. Supplied in carry case. Replaces stripped/worn threads in cylinder head for M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 threaded glow plugs.
Thread Inserts: M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 (5 of each)
Taps: M8 X 1.0, M10 X 1.0, M10 X 1.25, M12 X 1.0, M12 X 1.25, M14 X 1.25
Knurled Head
Insert Guide Rod
Tap Guide Pin: 8 x 45, 10 x 45, 12 x 45
Insert Driver: M8 x 1.0 & M10 x 1.0, M10 x 1.25 & M12 x 1.25
-
£44.10
✔ In Stock: 8
Sizes:
8 x 10mm (Approx Length: 234mm)
11 x 13mm (Approx Length: 329mm)
14 x 15mm (Approx Length: 369mm)
16 x 17mm (Approx Length: 409mm)
18 x 19mm (Approx Length: 409mm)
20 x 21mm (Approx Length: 415mm)
22 x 24mm (Approx Length: 432mm)
-
£3.36
✔ In Stock: 3
A Metric High Quality Drill Bit Set For Alloyed And Unalloyed Steels. With A Precision Ground Tip, Split Point And 135° Angle Makes These Din 338 Bits Very Precise For Centring During Spot Drilling. Suitable For Drilling Cast Iron, Iron, Non Ferrous Metals And Steel.
The Set Contains The Following Sizes: 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, And 6.0mm
• Hss-g Xtra
• High Quality
• Din338 Standard
• Fully Ground
• 135 Degree Split Point
• Precise
• Durable
-
£23.12
✖ Out of Stock
Comprehensive set of impact adaptors for use on all types of impact tools. Manufactured from drop-forged Chrome Vanadium steel, for the smaller sizes and Chrome Molybdenum for the bigger sizes, with phosphate finish for added corrosion protection. Spring ball socket retention. Industrial black finish. Supplied in tool case.
Sizes:
3/8″ (F) x 1/4″ (M) = CRV
1/4″ (F) x 3/8″ (M) = CRV
3/8″ (F) x 1/2″ (M) = CRV
1/2″ (F) x 3/8″ (M) = CRV
1/2″ (F) x 3/4″ (M) = CR MO
3/4″ (F) x 1/2″ (M) = CR MO
3/4″ (F) x 1″ (M) = CR MO
1″ (F) x 3/4″ (M) = CR MO
-
£35.17
✔ In Stock: 4
All stored in moulded case. The set Contains the following:
1 x Hose Clamp Pliers
1 x Swivel Jaw Spring Wire Clip Pliers
1 x Swivel Jaw Band Clip Pliers
1 x Angled Flat Band Hose Clamp Pliers
1 x Hose Remover Pliers
1 x Clic- R Collar Pliers
1 x Flat Band Hose Clamp Pliers
1 x Screwdriver
1 x Hose Remover
-
£29.38
✔ In Stock: 1
Designed to identify and trace wires or cables without damaging the insulation. Also used for checking short circuit and locating open circuits etc… There is a sender and a receiver included in this instrument. Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery etc… Simple to use simply connect the transmitter in series with the circuit or wire under test and then scan the circuit/wire with the tracers flexible probe to find the trouble spot. Only for use on DC voltage do not use on AC voltage.
Operates on DC voltages from 6 – 42 volts. Do not connect to circuit exceeding 42 volts DC. Do not use with any component or circuits of the ignition system. Internally protected against power surges and overloads. Adjustable sensitivity for all tracking situations. The probe of the receiver is built of coiled steel and may be bent as needed in order to reach wires in congested or difficult areas. For the best possible range, the receivers probe tip (black cap) should be positioned perpendicular (90 degrees) to the wire being traced. 7″ Flexible probe allows reaching wires in congested places. Transmitter and receiver LEDS show open or short circuit conditions. Powered off 2 x 9v batteries (Included) comes complete with a full set of instructions for accurate and quick use. Supplied in a storage case.
-
£3.28 – £8.96
✔ In Stock
Flexible Gear Ratchet Combination Wrench 8 – 24mm
-
£24.16
✔ In Stock: 7
Designed to measure return fuel flow on diesel vehicles having up to 6 cylinders fitted with common rail injection system. Identifies, worn, blocked or inoperative injectors. Supplied with both measurement tubes and bottles for short or long term testing. 24 Injector adaptors for BOSCH, SIEMENS, DENSO and DELPHI injectors. Supplied in a blow moulded storage case. This high quality Flow Meter comes to you brand new with retail packaging. This is a perfect addition / replacement to any toolbox or workshop.
-
£4.60
✔ In Stock: 2
Forged from steel with black phosphate coating for protection. Hardened and tempered for enhanced durability. 1″ drive so will fit any 1″ drive ratchets / bars / extensions etc.
Size: 36mm
Points: 6
Total length of socket: 80mm
Outside diameter of socket end: 55mm
Outside diameter of drive end: 50mm
Hardened: HRC 38-42 for durability
Finish: Black phosphate for protection
-
£1.79
✔ In Stock: 10
Size: 19mm
Points: 12
Drive: 1/2″
Total length of socket: 78mm
Style: Euro
CR-V with black phosphate finish for protection.
-
£25.09
✔ In Stock: 5
Universal Spanner Extender Extension Wrench Power Bar 385mm
-
£23.18
✔ In Stock: 3
Designed to straighten out clamp dents in mufflers and tailpipes quickly and easily. A Simple wrench turn expands pipe for exhaust system repair and installation. A perfect tool for fitting after market rear boxes to a standard exhaust. This high quality Pipe Expander Set comes to you brand new with retail packaging/tag. Full set of 3 expanders to fit small, medium, large cars, 4 x 4’s and commercial vehicles. Expander Sizes:
Small Expander: 1-1/8″ to 1-3/4″
Medium Expander: 1-1/2″ to 2-1/2″
Large Expander: 2-1/8″ to 3-1/2″
-
£65
✔ In Stock: 1
VAG Timing Tool Set For 1.2 / 1.4 / 1.6 FSI | TSI | TFSI Petrol Engines on the VAG range of vehicles from 2003 to 2015. Set Includes: Dial Test Indicator & Adaptor For An Accurate TDC | Crankshaft Locking Pin | Camshaft Locking & Alignment Tools | Gauge / Tension & Alignment Pins.
- OEM Codes: T10340 | T10341 | T40011 | T10414 | T10170 | T10171 | T10171A | VAS6079
-
£12
✔ In Stock: 3
VAG Crankshaft Locking Tools for 1.4 | 1.6 |1.9 | 2.0 TDI Engines / 2002 – 2008. Allows checking and adjustment of the engine timing during tooth belt and camshaft replacement.
– Crankshaft Locking Tool
– Pump Wheel / Camshaft Locking Tool
– Crankshaft Locking Tool
– Locking Pin – 4mm
– Locking Pin For V-Belts
Engine Codes: AJM | AMF | ANU | ARL | ASZ | ATD | AUY | AVB | AVF | AWX | AXR | AZV | BAY | BHC | BJB | BKC | BKD | BKE | BLB | BLS | BMM | BMN | BMS | BNA | BNM | BNV | BPW | BRB | BRC | BRD | BRE | BUY | BVA | BVF | BVG | BWV | BXE
OEM Codes: 9882 | 9883 | 310-085 / 23-059 | 303-1054 | MB995206 | MB995208 | MB995209 | T10100 | T10050 | T20102 | T10115 | T10060A / T40098 | T2016
-
£65
✔ In Stock: 2
US7055 US Pro VAG VW AUDI SEAT SKODA Timing Tool Locking Kit Diesel Engine 1.4 – 1.6 – 2.0 TDI. Timing tool set for Audi, Seat, Skoda and VW with diesel TDI CR engines from 2012.
- Contents: 1 x Cambelt Tensioner Locking Tool 2.5 mm | 1 x Ball-End Hex Key 6 mm | 1 x Hex Key 8 mm | 2 x Fuel Pump Locking & Camshaft Alignment Pins | 1 x Auxiliary Drive Tensioner Pin | 1 x Camshaft / Crankshaft Timing Pin | 1 x Crankshaft Timing Tool & Locking Pin | 1 x Sprocket Holding Tool For High Pressure Fuel Pump
- OEM References: T10490, T10051, T10060A, T10264
Applications:
- VW: Golf – SV/Sportsvan, VII, VII Estate, VII Wagon & Polo
- SEAT: Leon, ST
- AUDI: A3 – Cabrio, Saloon, Sedan, Sportback | A4 – Allroad, Quattro | A5 – Coupe, Cabriolet, Sportback | A6 | Q5 | TT
- SKODA: Octavia III
- Engines: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR Blue Motion, 1.6TDI CR
- Ecomotive: 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
- Engine Codes: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA , CRVC, CSUA, CSUB, CUNA, CUPA, CUTA
-
£33.56
✔ In Stock: 6
Valve spring compressor 35 – 200mm. For large petrol or diesel engines. Chrome plated.
2 Valve Spring Pressure Pieces:
- Outside Diameter: 25 mm For Spring Diameter: 21 – 25 mm
- Outside Diameter: 30 mm For Spring Diameter: 24 – 30 mm
-
£481.57
✔ In Stock: 1
The Van Vault 2 is the new version of the classic Van Vault relaunched with new extra safety and security including an anti-trap gas struf and a option of adding an anti-tamper alarm. Â Made from high tensile steel the Van Vault 2 is the standard in van tool safes.
Dimentions – 920x 555x 490mm
Weight – 46kg
Features
- 2mm sheet steel body and lid
- Tamper-proof single pin hinge
- Anti-drill 70mm disc lock
- Gas strut for soft open/close lid action
- Siren holes for optional anti-theft alarm
- Fully phosphate anti-corrosion protection
-
£18.54
✔ In Stock: 4
This dent repair kit is ideal for repairing minor dings and dents from all types of vehicles. This comprehensive dent puller kit comes with a hot glue gun, glue sticks, dent pulling tabs with wing nut, a glue scraper, a knockdown and a pulling bridge. Simple 1-2-3 instructions make this dent removal kit really easy to use so you can save yourself a costly trip to the garage.
-
£20
✔ In Stock: 392
The Vise Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever.
-
£80.03
✔ In Stock: 9
VW / Audi 2.0L Turbo Timing Set. Applicable to 2009 and newer VW / Audi model with the 2.0L Turbo (CAEB) engine.
-
£3.13
✔ In Stock: 13
CORROSION RESISTANT: This 180mm (7″) waste pipe unblocker is manufactured from flexible, galvanised spring steel for corrosion resistance. EASY TO USE: It has a corkscrew end and integrated handle for easy unblocking of drains and sinks.
-
£204.88
✔ In Stock: 8
- Power Voltage (V): 1 Phase AC 220V±15%
- Frequency (HZ): 50/60
- Rated Input Current (A): 25.4
- No-load Voltage (V): 60
- Output Current (A): 30-200
- Rated Input Voltage (V): 27.2
- Force Range (A) — –
- Duty Cycle (%): 60
- No-load Loss (W): 40
- Efficiency: 80
- Power Factor: 0.73
- Insulation Grade: F
- Housing Protection Grade: IP21
- Weight: 2.4kg
- Dimensions: 23cm x 10cm x 13.5cm
-
£10.63
✔ In Stock: 1
Universal Hub / Brake Drum Puller Suitable for removing 4-stud vehicle wheel hubs.
– Bolt Centres: 100 – 115mm
– Overall Width: 145mm
– Depth: 38mm
-
£81.44
✔ In Stock: 3
Wheel Hub Bearing Unit Tool – 66mm For removing and installing the compact wheel bearing combined wheel hub and bearing unit on VAG vehicles. High strength ball bearing fitted spindle.
Applicable to VW vehicles – Skoda Fabia | VW Fox / Polo
– With Pressure Plate With 8 Holes & 5 Bolts
– Divided Dismantling Shells
– Dismantling Plate
– Divided Mounting Shells
– Mounting Plate
-
£100
✔ In Stock: 3
Compact Wheel Bearing Set for Audi / VW for removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VW Polo Fox etc… High strength spindle and components suitable for direct use on vehicle while in-situ.
32mm brass padlock 
3 Piece rasp file set