Neilsen Brake Pipe Flaring Tool Kit 10pc CT1522
£14SKU: CT1522
✔ In Stock: 40
10pc Pipe Flaring Kit
Steel Compressor Yoke
Flaring Tool
Flaring Dies: 5, 6, 8, 10, 12, 14, 16mm
Showing 26–50 of 2610 results
SKU: CT1522
✔ In Stock: 40
10pc Pipe Flaring Kit
Steel Compressor Yoke
Flaring Tool
Flaring Dies: 5, 6, 8, 10, 12, 14, 16mm
SKU: CT1424
✔ In Stock: 6
6pc Flare Nut Spanner Set
Sizes: 6 | 8 | 10 | 12 | 13 | 14 | 15 | 17 | 19 | 21 | 22 | 24mm
15 Degree offset for easy access.
Ideal for fuel brake and air conditioning lines.
SKU: CT1498
✔ In Stock: 2
14pc Bearing Splitter and Gear Puller Set
Bearing Separators 9/32 – 3”
Bolts / Nuts and Washers 5.5” – M12 Thread
6” Pawls 3/8” -M16 Thread with Nuts
6.75” Connecting Bolts 3/8” – M16 Thread
5 x 16” – M18 Thread with Nuts
5.5” Push Rod
SKU: CT1224
✔ In Stock: 5
14 Fluted Cup Type Wrenches.
65mm -14 flutes
65/67mm – 14 flutes
68mm – 14 flutes
74mm – 15 flutes
76mm – 30 flutes
76mm – 14 flutes
74/76mm – 15 flutes
75/77mm – 15 flutes
80mm -15 flutes
80/82mm – 15 flutes
90mm – 15 flutes
93mm – 15 flutes
93mm – 36 flutes
100mm – 15 flutes
Drive Adaptor 1/2” F to 3/8” M
SKU: CT1318
✔ In Stock: 1
3 Magnetic Rails
Sizes: 8 | 12 | 18” / 200 | 300 | 450mm
Tool Organisers for wall mounting or use in tool cabinets.
SKU: CT1221
✔ In Stock: 2
10pc Crowfoot Wrench Set – 3/8” Dr.
Sizes: 10 | 11 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 22mm
With Storage Rail
SKU: CT1204
✔ In Stock: 6
1” Dr. Power Bar
39” / 1m Long With Swivel Head
SKU: CT1216
✔ In Stock: 3
Jumbo Size Bent End Pry Bar
915mm Go-Thru Handle
SKU: CT1190
✔ In Stock: 4
13 Blade Feeler Gauge
Range: 0.05 | 0.10 | 0.15 | 0.20 | 0.25 | 0.30 | 0.40 | 0.50 | 0.60 | 0.70 | 0.80 | 0.90 | 1.0mm
SKU: CT1133
✔ In Stock: 2
With Block Tester Powder. Detects exhaust gasses in radiators and so checks for gasket damage or cracked and warped cylinders. Works with Petrol engines. Not recommended for Diesel vehicles.
SKU: CT1137
✔ In Stock: 2
Block tester powder and bottle.
For use with Block Tester Kit CT1133 and CT3923
SKU: CT1097
✔ In Stock: 9
6pc Flare Nut Spanner Set – SAE
Sizes: 1/4 | 5/16 | 3/8 | 7/16 | 1/2 9/16 | 5/8 | 11/16 | 3/4 | 13/16 | 7/8 | 1in.
15 Degree Offset For Easy Access.
Ideal For Fuel Brake And Air Conditioning Lines.
SKU: CT1093
✔ In Stock: 5
15 Piece Deep Impact Socket Set – 1/2” Dr.
Sizes: 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 22 | 24 | 27 | 30mm
Chrome Vanadium
SKU: CT1123
✔ In Stock: 1
Flexible hose clip pliers, for replacing fuel oil and water hose. Ideal for confined spaces.
630mm Wire Flex
SKU: CT1057
✔ In Stock: 1
25ft x 1/4” Twin Welding Hose Reel. All Heavy Duty Steel Construction for Industrial and Commercial Applications. Solid Steel Axle and Hose Stop Guard. Smooth Operating Roller Bearing. Keeps your Compressors Air Hose Safe and Clean. Red Hose for Oxygen.
Max. Working Pressure: 900psi
Air Hose Inner Diameter: 1/4”
Working Pressure: 900psi
Including 39” Leader Hose
SKU: CT0781
✔ In Stock: 8
Convenient storage option with easy access. Plastic bins are removable for convenience and ease. For garages and workshops – helps keep work areas free of clutter.
Overall Dimensions: 45” x 37” x 11”
Holds 32 Small Red Bins: 5-1/2” x 3-1/4”
Holds 15 Large Blue Bins: 8-1/4” x 5”
SKU: CT0744
✔ In Stock: 29
Power Bar Head – 1/2” Dr.
Replacement For CT0764
SKU: CT0575
✔ In Stock: 65
Antifreeze & Coolant Tester. Easy read scale and pointers. Calibrated in degrees C and F. Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength. Tests Ethylene Glycol strength while the engine is hot or cold. Composite body and rubber bulb for workshop durability.
SKU: CT0590
✔ In Stock: 2
Diesel injector nozzle tester. Used to adjust and calibrate the injection nozzle opening pressure and to carry out leakage / spray pattern and chatter characteristic tests.
For Nozzle Sizes: R | S | T
With 100mm Pressure Gauge: 0-60Mpa / 0-600bar and supplied with 1 – M12 pipe and 2 – M14 pipes.
SKU: CT0565
✔ In Stock: 4
29mm Combination Spanner / Satin Finish
SKU: CT0551
✔ In Stock: 3
Large C-Frame Ball Joint Separator. This large ball joint separator is designed for use on all cars and light trucks that have press-fit type ball joints. This tool will work with other cups from other sets in the NEILSEN range. The C-Frame in the set can be used to remove and install universal joints. This labour saving tool quickly separates tie rod ends and ball joints from suspension components. Eliminates broken grease reservoirs. No need for excessive hammering. Powerful lever action breaks loose stubborn joints. Works on tie rod ends and compact car ball joints.
SKU: US9272
✔ In Stock: 7
An assortment of vehicle trim clips for German brands.
Contents: 339 Pieces
SKU: US9156
✔ In Stock: 1
High grade mild steel solid wire for use with CO2 and Argon/CO2 mix gas. Widely used for automotive, engineering and fabrication work.
Copper coated.
Wire diameter: 1.2mm
Weight: 15kg
Spool size: 300mm (diameter)
Standards: ER70S-6, AWS A5.18, EN ISO 14341, CE, TUV.
SKU: US5895
✔ In Stock: 3
Instruction booklet. Supplied in carry case. Replaces stripped/worn threads in cylinder head for M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 threaded glow plugs.
Thread Inserts: M8 x 1.0, M10 x 1.0, M10 x 1.25, M12 x 1.25 (5 of each)
Taps: M8 X 1.0, M10 X 1.0, M10 X 1.25, M12 X 1.0, M12 X 1.25, M14 X 1.25
Knurled Head
Insert Guide Rod
Tap Guide Pin: 8 x 45, 10 x 45, 12 x 45
Insert Driver: M8 x 1.0 & M10 x 1.0, M10 x 1.25 & M12 x 1.25
SKU: US6263
✔ In Stock: 1
Designed to straighten out clamp dents in mufflers and tailpipes quickly and easily. A Simple wrench turn expands pipe for exhaust system repair and installation. A perfect tool for fitting after market rear boxes to a standard exhaust. This high quality Pipe Expander Set comes to you brand new with retail packaging/tag. Full set of 3 expanders to fit small, medium, large cars, 4 x 4’s and commercial vehicles. Expander Sizes:
Small Expander: 1-1/8″ to 1-3/4″
Medium Expander: 1-1/2″ to 2-1/2″
Large Expander: 2-1/8″ to 3-1/2″
End of content
End of content
No products in the cart.