Showing 176–200 of 2580 results
SKU: US6874
✔ In Stock: 13
US6874 US Pro 36″ Heavy Duty Metal Tyre Lever – Flat Wheel Removal / Change. Drop forged tyre lever 36inch. Chrome satin finish. Tapered ends. Rust and corrosion resistant.
SKU: US3228
✔ In Stock: 3
US3228 US Pro 6pc 3/8″ & 1/2″ Dr. Triple Square Spline Bit Socket Set.
3 Piece In 3/8″ Drive:
– M6 (48.5mm L): Various Applications On European Vehicles
– M8 (58mm L): Remove & Install Head & Accessory Bolts On Mercedes. Remove & Install Axle Shaft Bolts On VW | Audi’s
– M10 (67.8mm L): Used For Cylinder Head Bolts & Drive Shaft Bolts On Mercedes. Remove & Install Cylinder Head Bolts On VW | Audi’s
3 Piece In 1/2″ Drive:
– M12 (108mm L): Remove & Install Cylinder Head Bolts On Mercedes, Rear Toe Adjustment On 1999 & Newer Audi A6 & Axle Shaft Bolts On New VW’s
– M14 (108mm L): Used For 2003 & Later VW Touareg Front Axle Boots, 2003 & Later Porsche Cayenne Front Axle Boots, Various Audi | VW Axle Boots + Audi TT Differential Mount Bolts & Transmission Drain Plug
– M16 (108mm L, Tamper Proof): Used For Audi TT Clutch & Belly Pan, Various Audi | VW Transmission Drain Plugs, 2003 & Later VW Touareg | Porsche Cayenne Brake Caliper Bolts, Detroit Diesel’s Flywheel Bolts & Front Crank Pullers On 900 & 4000 Engine Plus Head Bolts On 900 Engine
SKU: US3508
✔ In Stock: 3
US3508 US Pro A selection of deep and shallow impact sockets with 1/2″ drive, 6 point, CRV material hardened to HRC 42-48. Phosphate finish for protection. Supplied in EVA tray.
SKU: US5149
✔ In Stock: 1
US5149 US Pro Hydraulic ram providing up to 10 tons of power the most stubborn of hubs. To aid in the removal of wheel hubs, etc… For both four & five stud hubs. Can be used for a wide range of applications. Diameter of the tools disc 148mm approximately.
SKU: CT2429
✔ In Stock: 10
36mm Deep Impact Socket 3/4″ Drive.
SKU: CT0180
✔ In Stock: 9
16mm Combination Spanner / Satin Finish.
SKU: S10810
⚠ Available on backorder
The Van Vault 2 is the new version of the classic Van Vault relaunched with new extra safety and security including an anti-trap gas struf and a option of adding an anti-tamper alarm. Made from high tensile steel the Van Vault 2 is the standard in van tool safes.
Dimentions – 920x 555x 490mm
Weight – 46kg
SKU: CT6202
✔ In Stock: 1
Lever Block. High Quality Brake Well-designed brake makes this ratchet puller hoist more stable and safer to load and drop the object. It helps prevent sudden drop or chain clog during operation and avoid damage. Hands on Easily Manually operated hoist block chain with hook mounted. Quick and easy to set up, lightweight, and stores away in any cabinet. The hook has a safety latch and can rotate 360° without any limitation, easy to operate. User-friendly Handle The Handle of the chain hoist is covered with high quality plastic that performs a comfortable grip, and works to prevents your hand from injury.
SKU: CT3258
✔ In Stock: 7
The CT3258 is designed for checking pressure and vacuum systems like boost pressure, vacuum solenoid valves, tank vents, MAP sensors, etc… The kit can also be used for brake bleeding. Kit also includes reservoirs, hoses and adaptors for bleeding brake and clutch systems. 63.5mm pressure / vacuum gauge.
SKU: 44-920421
✔ In Stock: 157
SQ1029 Super Quality 3 F.C. Inox Cutting Disc.
SKU: R134A12KG
✖ Out of Stock
R134a is a non-ozone depleting HFC refrigerant used in automotive A/C and medium-temp refrigeration. It’s non-toxic, non-flammable, and widely adopted since 1991 as a replacement for R-12. Though eco-friendlier for the ozone, it has a GWP of 1,430 and is considered a greenhouse gas.
Applications: Auto A/C, Refrigeration
Oil Type: POE
ASHRAE Class: A1
SKU: TM114
✖ Out of Stock
– 1 x Adapter 3/8″ x 1/2″
– 1 x Carry Bag
SKU: US3467
✔ In Stock: 6
A collection of difficult to find socket types often not included in standard sets.
• M10S special profile 6 point socket for Toyota idler gear centre fixings
• 20mm 10 point socket for Honda Civic lower control arm bolts
• M6S, M8S, M12S special profile 6 point for Nissan and Renault clutches, cylinder heads and balance shaft fixings
• 8TS special 3 point profile for Nissan Balance shaft fixings
• 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings
– 19mm 5 sided socket for Citroen, Peugeot and Renault brake calliper mounting plate fixings.
14mm 5 sided socket for Smart car, Astra G and Zafira brake calliper mounting plate fixing
• Supplied on a storage rail
SKU: M0612
✔ In Stock: 2
Chrome molybdenum steel used for applications that. Command high torque rates. Chemically blacked, 6 point hardened & tempered impact sockets. Phosphate finish to assist with corrosion resistance. Drilled head to facilitate retaining pin. For use with air impact wrenches.
SKU: CT230584
✔ In Stock: 5
10 Ton Heavy Duty Hydraulic Gear Puller Kit. For removing pulley, bearings, gears and other components.
Set includes:
– 1 x Bearing Separator
– 1 x Beam
– 1 x Centre Adaptor
– 1 x Triple Head
– 1 x Twin Head
– 3 x 4″ Leg Puller
– 3 x 6″ Leg Puller
– 3 x 8″ Leg Puller
– 1 x Ram Part
– 1 x 2″ Extension Rod
– 4 x 8″ Extension Rod
– 1 x 4″ Extension Rod
– 1 x 10 Ton Hydraulic Ram
– 3 x Screw
SKU: MTQ148
✔ In Stock: 69
Q1® Premium Masking Tape has been designed to combine consistent unwinding, easy tear and conformability, performing extremely well when used tape on tape and with masking paper and protective film. Premium crepe paper masking tape with rubber base adhesive, specific for automotive car refinishing applications during drying cycles at high temperatures up to 230°F / 110°C. It guarantees high adhesion and doesn’t leave adhesive traces when removed.
SKU: MTQ136
✔ In Stock: 230
Q1® Premium Masking Tape has been designed to combine consistent unwinding, easy tear and conformability, performing extremely well when used tape on tape and with masking paper and protective film. Premium crepe paper masking tape with rubber base adhesive, specific for automotive car refinishing applications during drying cycles at high temperatures up to 230°F / 110°C. It guarantees high adhesion and doesn’t leave adhesive traces when removed.
SKU: EQDTAP
⚠ Available on backorder
Comma’s 20/25L Drum Tap (EQDTAP) is an easy-to-use tap intended for use with any of Comma’s 20 & 25 litre containers to provide an efficient, hassle free dispensing solution. Suitable for dispensing various fluids such as engine oil, hydraulic fluid, cleaners and antifreeze.
SKU: GW17095
✔ In Stock: 7
Anti-fog full face shield protective head cover transparent safety mask. Fitted with adjustable elastic band and breathable valve. Comes with 2 filters.
SKU: BG5002
✔ In Stock: 18
Manufactured from chemical and impact resistant acetal resin, this entry-level plastic blowgun is suitable for use with both air and water. Ergonomically designed handle, for comfort in use. Valve allows trigger-adjustable airflow. Supplied in blister pack.
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now