Showing 2776–2800 of 2848 results
-
£46.09
✔ In Stock: 1
Vauxhall / Opel Timing Tool Set For Vauxhall / Opel 1.0L / 1.4L / 1.5L Petrol Engines and Turbo Petrol Engines.
– Camshaft Alignment Tool
– Camshaft Alignment Plate
– Balancer Shaft Alignment Tool
Applicable To: Adam / Astra K / Corsa-E / Insignia-B / Mokka-X / Viva ( Karl ) 2014 Onwards
Engine Codes:
LE1/B10XFL | LE1/B10XFT | LE1/B10XHL
LE2/B14XHL | LE2/B14XHT | LV7/B14XE
OEM Codes:
EN-51298 | EN-51367 | EN-51632
May be used with KMJ38122A
-
£65
✖ Out of Stock
VAG Timing Tool Set For 1.6 | 2.0 TDI CR Diesel Engines from 2012 onwards. The engines covered utilise a belt with transfer gears in the head. This kit includes the pins required for timing the camshafts in the head.
– Cambelt Tensioner Locking Tool 2.5 mm
– Hex Keys: 6mm | 8mm
– 2 Fuel Pump Locking & Camshaft Alignment Pins
– Auxiliary Drive Tensioner Pin
– Camshaft / Crankshaft Timing Pin
– Crankshaft Timing Tool & Locking Pin
– Sprocket Holding Tool For High Pressure Fuel Pump
VW: Golf – SV / Sportsvan / VII / VII Estate / VII Wagon / Polo
SEAT: Leon / ST
AUDI: A3 / Cabrio / Saloon / Sedan / Sportback | A4 / Allroad / Quattro | A5 Coupe / Cabriolet / Sportback | A6 Q5 / TT
SKODA: Octavia III
Engine Codes: CKFB | CKFC | CLHA | CLHB | CNHA | CNHC | CRBC | CRBD | CRFA | CRFC | CRKA | CRKBm | CRLB | CRLC | CRMB | CRVA | CRVC | CSUA | CSUB | CUNA | CUPA | CUTA
OEM Codes : T10490 | T10051 | T10060A | T10264
-
£55
✔ In Stock: 5
VAG Timing Tool Set. Diesel Engine Timing Belt Replacement. Camshaft & Crankshaft Locking Tools. Camshaft Wheel Puller | Balance Shaft Fixing Tool. Suitable for a wide range of VW Group vehicles.
-
£86
✔ In Stock: 17
Comprehensive range of commonly used hand tools for the workshop and around the home. The sockets and many of the hand tools featured are manufactured from chrome vanadium steel, correctly hardened and tempered. The tool kit includes 1/2″ and 1/4″ square drive 72-tooth reversible ratchets, self-grip pliers, extension bars and a wide range of spanners, screwdrivers, screwdriver bits and square drive sockets. All the tools are organised inside a sturdy blow moulded plastic storage box.
-
£113.38
✔ In Stock: 3
Vast selection of commonly used tools for the workshop and around the home contained inside a steel cantilever toolbox. Featuring a 45-tooth reversible ratchet, 16oz claw hammer, combination pliers, side cutters, a range of screwdrivers, a tape measure and a wide selection of screwdriver bits, sockets and hex keys. Lining the toolbox are high density foam inserts to help organise storage and clearly spot when tools are missing. Cantilever toolbox manufactured from sheet steel with five trays and measuring 420 x 200 x 200mm.
-
£35
✔ In Stock: 8
Achieve precise torque with this 1/2″ square drive torque wrench, calibrated for 28-210Nm. Perfect for automotive, construction, and industrial applications, it ensures accurate fastening with ease.
- Torque Range: 28 – 210Nm
- Drive Size: 1/2″ Sq. Drive
- Durable & Easy to Use – Built for reliability
- Includes Storage Case – Convenient for transport & safekeeping
-
£155
✔ In Stock: 2
Trailing Arm Bushing Tool For Ford Mondeo Mk4 / S-Max / Galaxy 2006 onwards. For servicing the rear trailing arm mounting bushings on Ford vehicles. Also suitable for some Volvo vehicles that share the same Ford platform. Can be used in-situ without removing the arm from the vehicle.
Applicable To:
Galaxy 06 On | Mondeo Mk IV 07 On | S-Max 06 On |
Volvo: S60 | S80 | XC60 | V70 | XC70 06 On
-
£68.84
✔ In Stock: 1
Positive drive of the axle nut. Any extensive slipping is avoided. Milled out profile. Robust execution.
– 3/4″ Drive
– Inner: 100mm
– Outer: 123mm
– Height: 84mm
– 8 Point
– Applicable: SCANIA Rear Axles Nut
-
£50.57
✔ In Stock: 1
1″ Dr. Inner: 83mm | Outer: 103mm | Height: 74mm Positive drive of the axle nut. Any extensive slipping is avoided. Milled out profile. Robust execution. Can be used with an impact wrench or torque wrench. Removal and fitting of the axle nuts in front of the brake disc.
Application Range:
– SCANIA Front Axle (e.g. 124L / 144L), Series 4 From 96 For Vehicles Above 16 Tons
-
£4.84
✔ In Stock: 5
FOR NARROW SPACES: This double-ended tubular box spanner and Tommy bar is ideal for loosening or tightening nuts and bolts in narrow recesses. SIZES: The spanner length is 175mm with a 2mm thickness, while the tommy bar is 175mm in length. DURABLE: It is made from hardened, heat-treated carbon steel for durability.
-
£48.19
✔ In Stock: 17
This metric key set includes Draper Tx-Star long arm and Draper Tx-Star security short arm, as well as hex ball end long arm and hex end short arm. Made from chrome vanadium steel, hardened and tempered with a blackened finish to help prevent corrosion. The T-handle design maximises torque. The hexagon ball end makes it easier to locate the key into position as it can also be used up to at a 30° angle, which is great for difficult to reach areas. Non-ball ends have chamfered edges. Fitted with high impact resistant polypropylene handles that are comfortable to grip. The handles are colour coded to help identify which is hex (blue) and which is Draper Tx-Star (Green). Each tool has a convenient hang hole. Supplied with a heavy duty plastic stand for organisation and storage.
-
£89.51
✔ In Stock: 2
Tyre Changer – Portable with Pry Bar. Steel construction with manual bead breaker. Suitable for use on most open centered wheels. Supplied with tyre bar. Handles most tyres from 8″ to 16″ (with a center hole through the rim) wheel rest plate dimension: 7-1/2″ Diameter x 3/16″ Thick.
– Size Of Base: 15-3/8″ x 18-1/2″
-
£12.38
✔ In Stock: 5
This universal clutch alignment tool is made from durable, glass reinforced nylon and steel with precision moulded components for accuracy. Made from durable glass reinforced nylon and steel. The tool is supplied with 3 different sizes of expanding collets to suit a wide variety of cars and light commercial vehicles. By simply aligning the clutch and pressure plates, the tool makes the clutch plate replacement process much easier.
-
£13.66
✔ In Stock: 3
US6194 US Pro Universal CV Joint Removal Tool. Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to the transmission. Saves on labour time and suitable for most vehicles.
-
£14.50 – £18Price range: £14.50 through £18
✖ Out of Stock
With caps and outlet cover. Long delivery spout for easy access. Large diameter filling aperture with screw cap. Graduated scale on side of jug.
-
£4.19
✔ In Stock: 7
DURABLE: This universal utility key is made from chrome plated zinc for durability. MULTI-PURPOSE: It includes a double-ended screwdriver bit (PH2 and flat), a large and small square key shape and triangular and flat offset keys. VERSATILE: It is ideal for use on gas, electric and water meter cabinets, as well as stop cocks, outside taps and radiators.
-
£7
✔ In Stock: 108
Heavy Duty Webbing Strap. Strong CR-MO material. This high quality Oil Filter Strap Wrench comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size Range: 21 – 120mm
Drive: 1/2″
-
£5
✔ In Stock: 8
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. CR-MO with HRC50-53. Black phosphate finish for protection.
Size: T45
Length: 78mm
-
£5
✔ In Stock: 7
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Industrial black oxide finish. This high quality T50 Torx socket comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size: T50
Length: 78mm
-
£5
✔ In Stock: 7
CRV Steel socket. S2 Steel bit.
1/2″ Drive
Overall length: 53mm
Bit length: 17mm
-
£5
✔ In Stock: 10
1/2″ drive so will fit any 1/2″ drive ratchets / bars / extensions etc. Made from chromium-vanadium steel for strength and durability and helps resist abrasion, oxidation, and corrosion. Industrial black phosphate finish. This high quality Socket comes to you brand new with retail packaging/tag. This is a perfect addition / replacement to any toolbox or workshop.
Size: T55
Length: 78mm
-
£19.12
✔ In Stock: 4
Shallow single hex design. CRV steel construction. Industrial black finish. Supplied in tool box.
Sizes: 10, 11, 12, 13, 14, 16, 17, 19, 21, 22, 24, 27, 30, 32mm
1/2″ Drive
-
£2.27
✔ In Stock: 2
Metric sizes 16mm / 17mm
75° Offset neck. CRV steel construction. Highly polished finish. Cold stamped. Dimpled non slip shaft.
Overall length 255mm (approx.)
-
£13.94
✔ In Stock: 4
Fine 72 tooth ratchet operation. Only 5° of rotation required per tooth. Flex head design. Long reach. CRV steel construction. Highly polished finish.
Overall Length: 415mm (approx.)
Metric Sizes 17mm / 19mm
-
£18
✔ In Stock: 6
An assortment of vehicle trim clips for German brands.
Contents: 339 Pieces
