Showing 301–325 of 581 results
SKU: 436754
⚠ Available on backorder
Heavy duty variable pitch holesaw. Bi-metal construction. Hardened HSS teeth, flexible high carbon steel backing for fast clean cut. For cast iron, stainless and structural steel, alloyed and non-alloyed aluminium, bronze, copper, PVC, acrylic and wood.
SKU: 381141
⚠ Available on backorder
Ideal for all sanding applications, especially edge and contour sanding. For use with power drills and drill presses. Includes 4 x rubber drums, 12.70 / 1/2″, 19.05mm / 3/4”, 25.40mm / 1” and 38.1mm / 1-1/2”, and 16 x sanding sleeves, 2 x 80 and 120 grit, for each of the four drum sizes.
SKU: 386171
✖ Out of Stock
Aluminium oxide abrasive grain resin bonded to GX51 backing cloth. Overlap joint with extra top-skive for reduced chatter. For sanding wood, paint, varnish, plastics, plasters and metal. Fits all 10 x 330mm file sanders.
SKU: 363320
✖ Out of Stock
Aluminium oxide abrasive grain resin bonded to GX51 backing cloth. Overlap joint with extra top-skive for reduced chatter. For sanding wood, paint, varnish, plastics, plasters and metal. Fits all 100 x 610mm belt sanders.
SKU: 498520
⚠ Available on backorder
Strong, hard-wearing tungsten carbide teeth for long life and performance. Enhanced gullet clearance for rapid waste removal. For plasterboard, bricks, aerated block, wood, plywood, laminate and PVC. Select the correct drill speed by material for cut quality and performance. Compatible with Silverline arbors.
SKU: 282395
⚠ Available on backorder
Heavy duty steel body dry core drills with diamond dust cutting segments. Cuts clean holes in masonry. Ideal for use with or without lubricant. Use with 1/2″ BSP compatible arbors and drills equipped with a safety clutch.
SKU: 279870
✔ In Stock: 1
Titanium-coated, high carbon steel flat drill bits for wood, composites and plastics, supplied in a handy, soft-grip storage case. Compatible with all 13mm 3-jaw chucks. Includes 10, 12, 16, 19, 22, 25 and 32mm.
SKU: 282587
⚠ Available on backorder
Heavy duty aluminium oxide cloth bonded to fibreglass backing disc. Long-life self-renewing design lasts up to 28 times longer than fibre discs. For use with hand-held angle grinders. Used for grinding, finishing, stock removal and weld dressing. Suitable for use on steel, cast iron, alloys and wood.
SKU: 273151
⚠ Available on backorder
Aluminium oxide discs for general purpose sanding. 8 punched holes for dust extraction. Compatible with all 225mm hook and loop backing pads, and 225mm wall sanders.
SKU: 267362
⚠ Available on backorder
Aluminium oxide. Full resin bond. Flexible backing paper. Long-life, high-performance abrasive. Open coat reduces clogging. Use with 1/2 sheet sanders, palm sanders and for hand sanding. 115mm x 50m roll.
SKU: 266831
⚠ Available on backorder
Disposable cup mask. Single use. This product does not offer rated protection.
SKU: 275488
⚠ Available on backorder
Aluminium oxide cloth. Spiral glued to cotton backing tube. Ideal for sanding curves and bends. Compatible with bobbin sander drums. Includes 13mm, 19mm, 26mm, 38mm, 51mm and 76mm bobbin sleeves.
SKU: 275267
⚠ Available on backorder
Aluminium oxide cloth. Spiral glued to cotton backing tube. Ideal for sanding curves and bends. Compatible with bobbin sander drums. Includes 13mm, 19mm, 26mm, 38mm, 51mm and 76mm bobbin sleeves.
SKU: 277865
✔ In Stock: 14
Aluminium oxide abrasive discs for sanding wood, paint, varnish, plastic, plaster and metals. Compatible with air sanders with 150mm backing pads and 150mm bench top disc sanders. Compatible with Silverstorm 972660.
SKU: 273222
⚠ Available on backorder
Milled and ground HCS steel drill bits. Coated for increased corrosion resistance. Drills clearance holes and countersink in one operation. Ready fitted with high performance wood drill bit. Sizes: 3, 3.5, 4, 4.5, 5, 5.5 and 6mm. Includes hex key and wooden case.
SKU: 691291
⚠ Available on backorder
Aluminium oxide. Full resin bond. Flexible backing paper. Long-life, high-performance abrasive. Open coat reduces clogging. Use with 1/2 sheet sanders, palm sanders and for hand sanding. 115mm x 50m roll.
SKU: 598433
⚠ Available on backorder
Heavy duty steel body dry core drills with diamond dust cutting segments. Cuts clean holes in masonry. Ideal for use with or without lubricant. Use with 1/2″ BSP compatible arbors and drills equipped with a safety clutch.
SKU: 598475
⚠ Available on backorder
Tungsten carbide-tipped. High standard, double flute for efficient waste removal. For concrete, masonry, lightweight block and stone.
SKU: 721675
⚠ Available on backorder
Precision ground, high carbon steel brad point drill bit with a single centre point and twin outer cutting spurs. Centring point enables drill bit to be positioned exactly on a pre-marked spot before drilling commences. For timbers and man-made woods.
SKU: 719769
⚠ Available on backorder
Comprehensive set for kitchen fitters. TCT cutting edges and strong, hardened steel shanks. Supplied in a wooden storage case. Includes: 1 x straight bit 63 x 12.7mm with 12mm shank; 2 x straight bits 50 x 12.7mm with 12mm shank; 1 x flush trim bit 25.4 x 12.7mm with 8mm shank.
SKU: 719802
✔ In Stock: 12
White polypropylene, disposable overall with zip-up front, elasticated hood, cuffs and ankles. Lightweight and breathable. Protects from dust, dirt and grime. Ideal for DIY, general maintenance and dusty environments. Buy one size larger to allow for clothing.
SKU: 793793
⚠ Available on backorder
Arbors fit both 1/2″ BSP TCT and diamond core drills. For use with Silverline Morse Tapered Guide Drill Bits. Includes ejector drift to remove taper guide drill.
SKU: 792089
⚠ Available on backorder
Heavy duty aluminium oxide cloth bonded to fibreglass backing disc. Long-life self-renewing design lasts up to 28 times longer than fibre discs. For use with hand-held angle grinders. Used for grinding, finishing, stock removal and weld dressing. Suitable for use on steel, cast iron, alloys and wood.
SKU: 793761
⚠ Available on backorder
Heavy duty aluminium oxide cloth bonded to fibreglass backing disc. Long-life self-renewing design lasts up to 28 times longer than fibre discs. For use with hand-held angle grinders. Used for grinding, finishing, stock removal and weld dressing. Suitable for use on steel, cast iron, alloys and wood.
SKU: 703514
⚠ Available on backorder
Self-adhesive magnetic strip sticks to flat or curved surfaces. For lightweight applications.
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now