£16✖ Out of Stock
PCL’s Blowgun Style Tyre Inflator is a general purpose tyre inflator with an all alloy body and rubber protected gauge. The LTG01 Blowgun’s durable alloy body and Euro style valve connector is most suited to lower volume and non-commercial applications. Simple and easy to use. Ideal for general low volume tyre inflation.
- Hose Length: 0.4m
- Tyre Valve Connection: Euro Clip-on
- Calibration: 10-174psi / 0-12bar
- Display Resolution: 2psi / 0.1bar
- Maximum Inlet Pressure: 115psi / 8bar
£10✔ In Stock: 23
There are two types of connector. It is therefore important when purchasing connectors to specify whether a closed or open end type is required.
A Closed End connector is used when air is supplied directly from a main air line (i.e. compressor or air receiver). A non-return valve unseats on connection to the tyre’s valve, allowing air to flow into the tyre. The handles on these connectors are red in colour.
An Open End connector is used with MK3 Tyre Inflator, PCL wall gauges and PCL portable gauges. This connector has a pin which unseats the tyre’s valve when in use. The handles on these connectors are black in colour.
- Suitable for inflation of twin tyres,
- Colour coded handles – black for open end and red for closed end,
- Choice of stem length.
– Valve Style: Open End
– Thread Type: Female
– Thread Size: Rp 1/4
– Valve Size: 8v1 (Standard)
£51✔ In Stock: 61
- Suitable For Use With Motor Vehicles, Cycles, Dinghies etc…
- Length Of The Hose: 60cm
- Max. Working Pressure: 0.8 Mpa
- Nozzle: 6.3 mm
- Inlet: 1/4″
