“Chuck Impact Drill 13mm 800W 230V” has been added to your cart.
View cart
Showing 251–275 of 418 results
-
£136.39
✔ In Stock: 2
The Brake Pressure Bleeder Kit tool allows you to bleed or replace brake fluid without the need for an additional person, can be pre-charged with compressed air, making it easy to use in places where no compressed air connection is available. With a working pressure of 0.7 – 2.8bar (10 – 40psi) and an air consumption of 128L/min at 2.1bar (4.5CFM at 30psi).
– Contains 15pc Adaptor Set For Many European, Japanese, American Vehicles
– Suitable For ABS Systems
– Suitable For Brake Fluids: DOT 3, DOT 4, DOT 5, DOT 5.1
– Working Pressure: 0.7 – 2.8bar (10 – 40psi)
– Air Consumption: 128L/min at 2.1bar (4.5CFM at 30psi)
– Tank Capacity: 5.5L
– Air Inlet: 6.3mm (1/4″)
– Filling Hose Length: 5.3m (approx.)
-
£10.30
✔ In Stock: 2
The Drum Brake Spring Pliers are suitable for most vehicle drum brakes. One end grips onto the brake lining while the other hooks onto the spring, allowing for easy removal, Plier Length 220mm.
-
-
£5.09
✔ In Stock: 70
Castor wheel 100mm flattened universal with brake.
-
£619.50
✔ In Stock: 2
Cement / Concrete Mixer with Electric Motor.
- Voltage: 230V
- Frequency: 50Hz
- Power: 375W
- Drum Capacity: 140L
- Motor Speed: 13800rpm
- Mix Speed: 28 – 30rpm
-
£81.96
✔ In Stock: 1
Chain with 2 Clevis Hooks
Chain Length: 6m Length
Working Load: 3.15T
Suitable for Towing / NOT Lifting
Supplied with Canvas Storage Bag
-
£55
✔ In Stock: 5
Impact Drill 230V / 800W / 50Hz With Adjustable Handle and Chuck Key.
- Chuck Size: 13mm
- No-Load Speed: 3000 RPM
-
£2.44
✔ In Stock: 40
Sharpening Stone – Cigar Shape, Long 300mm, Aluminium Oxide, Ideal For Sharpening Knives / Chisels & Garden Tools.
-
£13.21
✔ In Stock: 8
Product Description: Circuit Tester Power On For 6 / 12 and 24 Volt Circuits Insulated Ground Clip Stainless Steel Probe Heavy Duty 5ft Lead
- Circuit Tester,
- Power On,
- For 6 / 12 & 24 Volt Circuits,
- Insulated Ground Clip,
- Stainless Steel Probe,
- Heavy Duty 5ft Lead.
-
£30.24
✔ In Stock: 8
CO2 Regulator Gauge For MIG and TIG providing accurate regulated gas flow, 2″ dual gauges for easy reading. Accurate measurement of gas. Brass regulator body. Internal safety pressure relief design. Plastic adjustment knob for smooth / easy touch flow settings. Ideal for commercial / industrial and laboratory applications.
– Inlet Pressure: 0 – 4500psi / 0 – 315bar
– Output Pressure Range: 0 – 10bar
– Flow: 0 – 20L/min
– Threaded Inlet W 21.8 x 1/14″ Standard
– Outlet / Tube diameter: 6mm / 1/8″ Inner Thread
-
£41.89
✔ In Stock: 1
Heavy Duty Coil Spring Compressor With Brace. Features adjustable safeguard brace that prevents accidental release of spring under load and also enables the parts of the tool used for removing the coil to always operate in parallel. Use with a 19mm socket or wrench.
Range: 23 – 280mm
Max. Capacity Per Pair: 1200kg
-
£50.17
✔ In Stock: 1
- 25 Piece Combination Spanner Set
- Sizes: 6 – 32mm
- Fully Polished With Rubber Dipped Handles
- Chrome Vanadium Steel
-
£17.35
✔ In Stock: 3
Air Flush Gun for Cooling Systems. Step adaptor for different hose diameters. For use with air and water to clean most systems. Trigger handle to control flushing and simulate pulsing force.
- 5 Adaptor Sizes: 19mm | 29mm | 32mm | 36.5mm | 40mm
- Operation Pressure: 90psi
-
£207.90
✔ In Stock: 1
Ideal for in-field lubrication where power and speed are required.
– Voltage: 18V
– Charger: With 90 – 230V Fast Charger
– Charge Time: 1 – 1.5h
– Pressure: 8000psi
– Flow Rate: 100g/min
– Hose Length: 700mm
-
£8
✔ In Stock: 63
Cow split leather welding gloves. Size: 14″ / 360mm
-
£30
✔ In Stock: 6
10pc Crowfoot Wrench Set – 3/8” Dr. With Storage Rail.
- Sizes: 10mm | 11mm | 13mm | 14mm | 15mm | 16mm | 17mm | 18mm | 19mm | 22mm
-
£11.65
✖ Out of Stock
3 Magnetic Rails
Sizes: 8 | 12 | 18” / 200 | 300 | 450mm
Tool Organisers for wall mounting or use in tool cabinets.
-
£21.70
✖ Out of Stock
- 28mm Injector Socket 1/2” Dr. 12 Point Applicable To Scania | Volvo
- 7/8” Injector Socket 1/2” Dr. 12 Point Applicable To Nissan | VW
- 7/8” Long Reach Vacuum Switch Socket 1/2” Dr. 6 Point Applicable To Audi | BMW | Chrysler | Ford | Mercedes | Rover | Seat | Volvo | VW
-
£16.38
✔ In Stock: 12
CV Boot Tool For installing vehicle rubber CV boots without dismantling the CV joint.
- Steel Centre / Plastic Composite Cone
- Diameter Size: 100mm External / 93mm Internal
- Length: 405mm
-
£9.72
✔ In Stock: 7
Oetiker CV Drive Shaft Boot Clamp Pliers. These pliers are designed to fit the Oetiker CV Drive Shaft boot Securing clips. They have a plate that presses a flat on the top of the clip so that it forms the spring loop correctly. The Handles have 3/8″ Dr. holes in the handle shafts to enable a torque Wrench to be used with the tool when required.
-
£170
✔ In Stock: 4
Diesel Injector Extractor Master Set With Various adaptors for the removal of most diesel injectors.
– 3 Slide Hammers: 1.6kg 160mm Long | 2.7kg 460mm Long | 5.1kg 600mm Long
– 2 Pulling Claws With Fork Opening: 13.7 x 18mm / 105mm Long | 12.7 x 19mm / 130 mm Long
– 5 Slotted 6 Point 1/2″ Dr. Sockets: 25mm | 27mm | 28mm | 29mm | 30mm x 100mm Long
– Injector Extractor Sleeve With Shells: Outer Diameter 35mm | Internal Diameter 29mm / M17 x 1.0 Spindle
– Pulling Adaptor With External Thread M27 x 1.0 – 3pc & M25 x 1.0
– Pulling Adaptor With Internal Thread M27 x 1.0 – 3pc
– Sliding Hammer Adaptor For Inner / Outer & Claw Extractor
-
£132.83
✔ In Stock: 2
Diesel injector nozzle tester. Used to adjust and calibrate the injection nozzle opening pressure and to carry out leakage / spray pattern and chatter characteristic tests.
- For Nozzle Sizes: R | S | T
- With 100mm Pressure Gauge: 0-60Mpa / 0-600bar and supplied with 1 – M12 pipe and 2 – M14 pipes.
-
£20
✔ In Stock: 11
Digital multi meter LCD display with max. reading: 1999. Overload protection, low battery indication. Ideal for use in the Home / Laboratory or Workshop.
- Measurement Functions: AC Voltage | DC Current | DC Voltage | Resistance | Diode
-
£12
✔ In Stock: 4
The is An essential tool for the removal and installation of new brake pads. Suitable for most ATE / Bendix / Delco & Girling Calipers. Alfa. Audi. Fiat. Ford. Nissan. Vauxhall. Opel. Peugeot. Porsche. Renault. Rover. VW. Can Be used with 1/2″ Dr. ratchet or 21mm spanner.
Length: 87mm
-
£12
✔ In Stock: 15
Disc Brake Piston Rewind Tool is designed to be used on disc brake Calipers fitted to most vehicles, features Right Hand Thread with Reaction Plate and Reversible Key 3/8″ Dr.
Silverline Steel Frame Square