Showing 101–125 of 252 results
£52.81✔ In Stock: 5
Compact air ratchet with stubby yoke. Manufactured with a lightweight aluminium housing attached to an ergonomic soft grip handle providing comfort even when used for prolonged periods. Fitted with a 4-speed rear regulator, a middle exhaust and attached with a 1/4″ BSP airline connector which connects with the 360° rotating air inlet, helping prevent air-lines from kinking when in use. A comfortable tool for auto body repair jobs like removing or replacing radiators, spark plugs, air conditioning and water pumps.
Air Inlet: 1/4″ BSP
Average Air Consumption: 4cfm (113L/min)
Free Speed: 160 RPM
Min Hose Size: 3/8″ (10mm)
Operating Air Pressure: 90psi (6.2bar)
Square Drive: 1/2″
Ultimate Torque: 85Nm (60ft/lb)
Vibration Level: 4.35m/s2
Weight: 1.22kg
£140.68✔ In Stock: 1
Twin hammer air impact wrench kit. Manufactured with a lightweight aluminium housing attached to an ergonomic soft grip handle providing comfort even when used for prolonged periods. Fitted with a high tech three speed reversible motor capable of 3-position power in forward and full power in reverse. Attached with a 1/4″ BSP airline connector all stored in a robust plastic carry case. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect.
Air Inlet: 1/4″ BSP
Average Air Consumption: 6.5cfm (184L/min)
Free Speed: 7.000 RPM
Min Hose Size: 3/8” I/D
Operating Air Pressure: 90psi (6.2bar)
Ultimate Torque: 680Nm (500ft/lb)
Vibration Level: 4.35m/s2
Weight: 2.59kg
£46.18✔ In Stock: 2
Die grinder perfectly designed for grinding and polishing metal components. Manufactured from lightweight aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Fitted with a lever block trigger for increased safety and an adjustable 4-speed rear regulator. Attached with a 1/4″ BSP airline connector which connects with the 360° rotating air inlet, helping prevent air-lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect.
Air Inlet: 1/4″ BSP
Average Air Consumption: 4.0cfm (113L/min)
Collet Size: 6mm
Free Speed: 20,000 RPM
Min Hose Size: 3/8″ (10mm)
Operating Air Pressure: 90psi (6.2bar)
Vibration Level: 2.9m/s2
Weight: 0.53kg
£18.24✖ Out of Stock
1 x Pressure Washer 3m, High Pressure Hose
£8.36✔ In Stock: 4
Tough impact resistant ABS cases with soft grip, blade locking buttons on the side and base. The hold and measure buttons allow the user to lock the tape for accurate measurements with the button on base to control speed of return. The nylon coated, matt finished steel blade is marked with clear black and red graduations in metres into cm/mm and feet into inches, 1/8″ and 1/16″ and stud centre markings every 16″. Self – aligning end hook for very accurate internal/external measurements. Supplied in countertop displays. Manufactured to EC Class II Accuracy.
£58.78✔ In Stock: 15
Expert Quality, floor standing sprayer with Fluoropolymer Elastomer Rubber (FPM) seals and gaskets. These seals make FPM sprayers ideal for use with dangerous chemicals, solvents, fuel, scale removers, waterproofing agents, anti-mould solutions, oils, lubricants and the only choice for brake cleaning fluid. The 10 litre bottle capacity has an actual working capacity of 8.0 litres the other 2.0 litres is the air reserve which enables the pressurisation of the canister. Manufactured from translucent high density polyethylene and fitted with a high performance pump, adjustable spray pattern tip and a safety pressure release valve. The base skirt ensures stability in use while the carry handle and shoulder strap provide portability.
£15.23✔ In Stock: 274
Hand held sprayer with Fluoropolymer Elastomer Rubber (FPM) seals and gaskets, which make FPM sprayers ideal for use with chemical, solvents, fuel, scale removers, waterproofing agents, anti-mould solutions, oils, lubricants and the only choice for brake cleaning fluid. The 2.5 litre bottle capacity has an actual working capacity of 2.0 litres the other 0.5 litres is the air reserve which enables the pressurisation of the canister. Manufactured from translucent high density polyethylene and fitted with a high performance pump, adjustable spray pattern tip and a safety pressure release valve. For maximum usage ensure chemicals are rinsed out completely and not left for long periods in the sprayer.
£69.28✔ In Stock: 1
Polished face, high carbon steel solid forged head, that’s correctly hardened and tempered with a lacquer coating for rust protection. Natural straight grained hickory shaft sanded and lacquered.
£13.44✔ In Stock: 2
Carbon steel blade, hardened and tempered with lacquered finish. Soft grip handle for user comfort.
£17.75✖ Out of Stock
A varied and universally useful drill bit and accessory set. Supplied with 41 pieces suitable for a host of tasks. Perfect for both power tools and hand tools, and Supplied in a robust plastic carry case.
£220.48✔ In Stock: 8
Features: Brushless motor, 23 torque settings, Metal keyless chuck, Variable speed with electronic brake, LED Worklight, Adjustable side handle and depth rod, Supplied with 4.0Ah battery and charger. D20 interchangeable battery system allows you to combine the same battery/batteries with any of the tools within the D20 series.
Battery: D20 20V Li-ion
Batteries Per Item: 1 x 4.0Ah
Charger Type: 4A
Chuck Capacity: 13mm (1/2)
Drilling Capacity: (Steel) 13mm
Drilling Capacity: (Wood) 35mm
Impact Rate: 29700 BPM
Max Torque: 60Nm
No Load Speed: 0 – 500 RPM
Supplied In Case: Yes
Weight: 1.4kg (Bare Tool)
£3.67✔ In Stock: 12
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
£3.25✔ In Stock: 6
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
£3.25✔ In Stock: 14
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
£38.83✔ In Stock: 1
49 21 A21 SB Precision Circlip Pliers heavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Large contact faces on the tips: no distortion of circlips, easy fitting. Bolted joint: precise, zero backlash operation of pliers. Internal opening spring, protected and captive. Non-slip plastic coating on the handles. DIN 5254 B; 90° angled jaws. – Size of shaft: Ø 19 – 60mm- Tips (diameter): 1.8mm
£21.44✔ In Stock: 1
Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4″ hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals.
£20.35✖ Out of Stock
Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4″ hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals.
£19.51✔ In Stock: 1
Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4″ hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals.
£19.30✔ In Stock: 1
Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4″ hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals.
£3.25✔ In Stock: 8
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
