Showing 49–64 of 252 results
SKU: DRA76465
✔ In Stock: 13
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
SKU: DRA76466
✔ In Stock: 6
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
SKU: DRA71919
✔ In Stock: 6
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
SKU: DRA76467
✔ In Stock: 11
For use with power drills or with flexible shafts on flat or contoured surfaces. Ideal for stripping paint, metals, filler and varnish. Suitable for use on metal, fibreglass, filler, plastic and wood.
SKU: DRA83985
✔ In Stock: 1
Twin hammer air impact wrench kit. Manufactured with a lightweight aluminium housing attached to an ergonomic soft grip handle providing comfort even when used for prolonged periods. Fitted with a high tech three speed reversible motor capable of 3-position power in forward and full power in reverse. Attached with a 1/4″ BSP airline connector all stored in a robust plastic carry case. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect.
Air Inlet: 1/4″ BSP
Average Air Consumption: 6.5cfm (184L/min)
Free Speed: 7.000 RPM
Min Hose Size: 3/8” I/D
Operating Air Pressure: 90psi (6.2bar)
Ultimate Torque: 680Nm (500ft/lb)
Vibration Level: 4.35m/s2
Weight: 2.59kg
SKU: DRA15875
✖ Out of Stock
This underbody coating gun is air powered and supplied with a 300mm flexible nozzle for accurate spraying and access to confined spaces. It is ideal for use on vehicle chassis when rustproofing and is suitable for various primer and sub-coat paints, accepting most types of 1L coating tins. It is robust and made from lightweight aluminium. Supplied with 1/4″ BSP adaptor.
SKU: DRA84122
✔ In Stock: 3
Compact air ratchet with stubby yoke. Manufactured with a lightweight aluminium housing attached to an ergonomic soft grip handle providing comfort even when used for prolonged periods. Fitted with a 4-speed rear regulator, a middle exhaust and attached with a 1/4″ BSP airline connector which connects with the 360° rotating air inlet, helping prevent air-lines from kinking when in use. A comfortable tool for auto body repair jobs like removing or replacing radiators, spark plugs, air conditioning and water pumps.
Air Inlet: 1/4″ BSP
Average Air Consumption: 4cfm (113L/min)
Free Speed: 160 RPM
Min Hose Size: 3/8″ (10mm)
Operating Air Pressure: 90psi (6.2bar)
Square Drive: 1/2″
Ultimate Torque: 85Nm (60ft/lb)
Vibration Level: 4.35m/s2
Weight: 1.22kg
SKU: DRA84130
✔ In Stock: 1
Air shears for distortion and burr-free cuts on a range of materials including aluminium, tin, 1.2mm steel and most plastics. Manufactured from lightweight aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Attached with a 1/4″ BSP airline connector which connects with the 360° rotating air inlet, helping prevent air-lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect.
Air Inlet: 1/4″ BSP
Average Air Consumption: 5.5cfm (1,132L/min)
Cutting Capacity: 18 Gauge (1.2mm)
Cutting Capacity: (Mild Steel) 18 Gauge (1.2mm)
Min Hose Size: 3/8″ (10mm)
Operating Air Pressure: 90psi (6.3bar)
Strokes Per Minute: 3,200spm
Vibration Level: 4.3m/s2
Weight: 1.28kg
SKU: DRA99565
✔ In Stock: 3
A high-quality, hard-wearing aluminium oxide bench grinding wheel with fine grit. Suitable for general grinding, deburring and tool sharpening on non-ferrous metals and steel. Dry-cutting use only. Manufactured with a 31.75mm bore and supplied with 5 reduction rings enabling each bench grinding wheel to fit most bench grinders with a bore size between 12.7 – 31.75mm. Compatible with Draper Bench Grinder. Conforms to EN12413.
SKU: DRA02514
✖ Out of Stock
his auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level. The dark shade, sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides good visibility of the weld zone. It is suitable for TIG, MIG and arc welding, plasma cutting and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.
Suitability: TIG, MIG, Arc, Grinding & Plasma Cutting
Lens Size: 92.5 x 42.5mm
Shade Levels: 4 & 9 – 13
Lens Switching Time: 3/10,000s
ARC Sensors: 2
Sensitivity Control: Rotary Dial
Operating Temperature: -5 to +55℃
Power Supply: Li-ion Battery & Solar
Battery: Li-ion CR2450 600mAh (Replaceable)
Weight: 440g
SKU: DRA02513
✔ In Stock: 2
This auto-darkening welding helmet instantly switches on when the arc is struck and rapidly changes to 9-13 shade level. The dark shade, sensitivity and delay time are adjustable using control knobs. The helmet is powered by a solar cell and a lithium-ion battery (replaceable). The 92.5 x 42.5mm viewing area provides good visibility of the weld zone. It is suitable for TIG, MIG and arc welding, plasma cutting and also grinding. The comfortable headband is adjustable using the knob to enable an optimal fit.
Suitability: TIG, MIG, Arc, Grinding & Plasma Cutting
Lens Size: 92.5 x 42.5mm
Shade Levels: 4 & 9 – 13
Lens Switching Time: 3/10,000s
ARC Sensors: 2
Sensitivity Control: Rotary Dial
Operating Temperature: -5 To +55℃
Power Supply: Li-ion Battery & Solar
Battery: Li-ion CR2450 600mAh (Replaceable)
Weight: 440g
SKU: DRA92445
✖ Out of Stock
Battery tester with integral printer Supplied with 3 x printer rolls. Main functions include battery testing, cranking testing and charging testing, and featuring reverse polarity protection, and bad battery cell detection. For use on Lead-acid, AGM flat plate, AGM Spiral, Gel and EFB batteries. Supplied with 1M testing cables and a USB lead for use as an away from a vehicle power source. Capable of multi-lingual French, German, Spanish, Portuguese, Dutch as well as English.
SKU: DRA66804
✖ Out of Stock
A compact machine with one coarse and one fine grinding wheel, adjustable eye protection shields, spark deflectors, wheel guards and tool rests. Fitted with a cable and approved plug.
Bore: 12.7mm
Grinding Wheel Diameter: 150mm
Speed: 3000r/min
Width/Face: 19mm
Weight: 8kg
SKU: DRA19345
✔ In Stock: 16
Expert quality, saw edge, manufactured from high speed steel strip, electron beam welded to high quality carbon steel backing. Pack of two blades. HSS welded to carbon steel. Conforms to BS 1919.
SKU: DRA19344
✖ Out of Stock
Expert Quality, saw edge, manufactured from high speed steel strip, electron beam welded to high quality carbon steel backing. Two blades per card.
SKU: DRA71969
✔ In Stock: 1
Expert Quality, bi-metal with 8% COB alt added for extra strength. 1/4″ hex shank and 10mm depth collar with integrated sprung arbor for quick waste release. Manufactured from high quality steel helping to prolong the cutting edge. For use on sheet steel, stainless steel and non ferrous metals.
We care about your privacy
In order to provide you a personalized shopping experience, our site uses cookies.
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now