
Oil Changing
Choosing the wrong engine oil isn’t just a small mistake — it can wear your engine down faster and even void your warranty. Here’s how to get it right in a few minutes.
1. Check your owner’s manual first
Every manufacturer specifies an oil grade for your exact engine. It’s usually listed under “Recommended fluids” or “Engine oil specification.” This is always your starting point — everything else on this page is just to help you understand what that number means.
2. Understand the viscosity number (e.g. 5W-30)
- The number before the W (e.g. 5W) tells you how the oil flows in cold temperatures. Lower = better cold starts.
- The number after the W (e.g. 30) tells you how it flows at engine operating temperature. Higher = thicker, better protection under heat and load.
- “W” stands for Winter, not weight.
Most modern petrol cars in the UK and Ireland run on 5W-30 or 5W-40. Older or high-mileage engines sometimes need a thicker oil like 10W-40 or 15W-40.
3. Know the three main oil types
| Type | Best for | Notes |
|---|---|---|
| Fully synthetic | Most modern cars | Best protection, longest intervals |
| Semi-synthetic | Mixed-age engines | Good balance of cost and protection |
| Mineral | Older/classic cars | Cheapest, needs more frequent changes |
4. Match the approval standard, not just the viscosity
Look for manufacturer approvals on the bottle — codes like ACEA, API, or specific approvals such as VW 504.00 or BMW LL-04. Two oils can share a viscosity number but not the same approval, and using the wrong one can affect emissions systems and warranty cover.
5. Quick way to check before you buy
- Find your reg number or model + engine size.
- Search “[your car model] engine oil specification.”
- Match viscosity + approval code to what’s on the bottle.
- If in doubt, ask us — we can look it up by registration.
Not sure which oil fits your car? Browse our full range of engine oils or get in touch and we’ll match it for you.
