Wiring Loom Adhesive Cloth Tape 19mm x 15m
£3SKU: US2885
✔ In Stock: 21
US2885 US Pro Strong, flexible adhesive cloth tape used to harness wiring looms. Corrosion and flame resistant with good bonding strength. Width: 19mm Length: 15m Colour: Black
Shop
Showing 1–25 of 70 results
12pc Bag Of Assorted Air Hose Fittings
£21SKU: US8184
✔ In Stock: 43
US8184 US PRO 12pc Set “Two Touch” type – pull back to open and release to lock, connection couplings and fittings.
- Thread Type: BSP, Taper
- Includes:
1 x 1/4” F Coupler
1 x 1/4” M Coupler
1 x 3/8” M Coupler
2 x 1/4” F Plug
2 x 1/4” M Plug
2 x 8mm Hose Tail Plug
1 x 3/8” F Plug
1 x 3/8” M Plug
1 x 10mm Hose Tail Plug
Breakaway Cable 1055mm – Snap Hook & Ring Type
£5SKU: US9277
✔ In Stock: 9
US9277 US Pro Breakaway Cable 1055mm – Snap Hook & Ring Type. Heavy duty breakaway cable for caravans, trailers, horse boxes etc. Designed to activate the brakes on your trailer or caravan in the event if a decoupling. The cable is made from 3-4mm multi-strand steel wire with a protective red PVC sheathing. There is a snap hook fitting one end and ring fitting the other.
- Overall Length: 1055mm
- Wire: 3 – 4mm
- Multi-strand Breaking Load: 5000N
- Snap Hook: 80 x 7.5mm
- Ring: 35 x 5mm
- PVC Coated Wire
VAG Diesel Engine Timing Kit For 1.4 – 1.6 – 2.0 TDI CR
£65SKU: US7055
✔ In Stock: 6
US7055 US Pro VAG VW AUDI SEAT SKODA Timing Tool Locking Kit Diesel Engine 1.4 – 1.6 – 2.0 TDI. Timing tool set for Audi, Seat, Skoda and VW with diesel TDI CR engines from 2012.
- Contents: 1 x Cambelt Tensioner Locking Tool 2.5 mm | 1 x Ball-End Hex Key 6 mm | 1 x Hex Key 8 mm | 2 x Fuel Pump Locking & Camshaft Alignment Pins | 1 x Auxiliary Drive Tensioner Pin | 1 x Camshaft / Crankshaft Timing Pin | 1 x Crankshaft Timing Tool & Locking Pin | 1 x Sprocket Holding Tool For High Pressure Fuel Pump
- OEM References: T10490, T10051, T10060A, T10264
Applications:
- VW: Golf – SV/Sportsvan, VII, VII Estate, VII Wagon & Polo
- SEAT: Leon, ST
- AUDI: A3 – Cabrio, Saloon, Sedan, Sportback | A4 – Allroad, Quattro | A5 – Coupe, Cabriolet, Sportback | A6 | Q5 | TT
- SKODA: Octavia III
- Engines: 1.4TDI CR, 1.6TDI CR, 1.6TDI CR GreenLine, 1.6TDI CR Blue Motion, 1.6TDI CR
- Ecomotive: 2.0TDI CR, 2.0 RS TDI CR, 2.0TDI CR Ultra
- Engine Codes: CKFB, CKFC, CLHA, CLHB, CNHA, CNHC, CRBC, CRBD, CRFA, CRFC, CRKA, CRKB, CRLB, CRLC, CRMB, CRVA , CRVC, CSUA, CSUB, CUNA, CUPA, CUTA
Air Pulse Turbo Cleaning Gun 1000ml
£20SKU: US8789
✔ In Stock: 6
US8789 US Pro Air Pulse Turbo Cleaning Gun 1000ml. Ideal for upholstery, air conditioning, plastic parts, car mirrors, seats, floor mats, ventilation grilles, rims and other surfaces. The design of the nozzles allows cleaning of hard-to-reach places & enables surfaces to be cleaned with minimal moisture. Aluminium body.
- 2 Nozzles
- Working Pressure: 87 – 110psi
- Operating Temperature: 10°C – 40 °C
- Cup Capacity: 1000ml
- DO NOT EXCEED 110psi!
11pc Impact Nut Style Bolt Extractor Set
£22SKU: US2648
✔ In Stock: 5
US2648 US Pro 11pc Impact Nut Style Bolt Extractor Set. These screw extractors enable rounded or rusted hexagonal nuts, bolts or screws to be removed. Supplied in a storage case.
- Sizes: 9mm | 10mm | 11mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 19mm
- Includes: 7mm x 90mm Round Bar
4 Leg Chain Sling 2m, 10mm G80 6.7 Tonne – Adjustable
£190SKU: US9111
✖ Out of Stock
US9111 US Pro 4 Leg Chain Sling 2m, 10mm G80 6.7 Tonne – Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 6.7 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened.
1 x Master Link: WLL 6.7T
4 x Connector Link: G80, WLL 3.15T
4 x Grab Hooks (Shorteners): G80, WLL 3.15T
4 x 2 Metre 10mm Chain: G80, WLL 3.15T
4 x Clevis Hook with Cast Latch: G80, WLL 3.15T
1 x ID Tag4 Leg Chain Sling 2m, 8mm G80 4.25 Tonne Adjustable
£132SKU: US9110
✔ In Stock: 5
US9110 US Pro 4 Leg Chain Sling 2m, 8mm G80 4.25 Tonne Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 4.25 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened.
1 x Master Link: WLL 4.25T
4 x Connector Link: G80, WLL 2T
4 x Grab Hooks (Shorteners): G80, WLL 2T
4 x 2 Metre 8mm Chain: G80, WLL 2T
4 x Clevis Hook: G80, WLL 2T
1 x ID Tag8pc 3/8″ Dr. Extra Long Impact Star Torx Bit Socket Set
£13SKU: US3654
✔ In Stock: 7
US3654 US Pro 8pc 3/8″ Dr. Extra Long Impact Star Torx Bit Socket Set. An eight piece set of extra long Star bit sockets for use with torx products. Phosphate finish, CR-V sockets with hardened S2 bits for enhanced durability, 3/8″ Dr. so will fit any 3/8″ Dr. ratchets / bars / extensions etc…
- Contents: T25 | T27 | T30 | T40 | T45 | T50 | T55 | T60
- Length: 110mm
US PRO 17 x 19mm Extra Long Double Flexi Head Ring Ratchet Wrench 3872
£13.15SKU: US3872
✔ In Stock: 3
Fine 72 tooth ratchet operation. Only 5° of rotation required per tooth. Flex head design. Long reach. CRV steel construction. Highly polished finish.
Overall Length: 415mm (approx.)
Metric Sizes 17mm / 19mm36″ Heavy Duty Metal Tyre Lever
£7SKU: US6874
✔ In Stock: 9
US6874 US Pro 36″ Heavy Duty Metal Tyre Lever – Flat Wheel Removal / Change. Drop forged tyre lever 36inch. Chrome satin finish. Tapered ends. Rust and corrosion resistant.
- Length: 36″
- Width: 1″
6pc 3/8″ & 1/2″ Dr. Triple Square Spline Bit Socket Set
£14SKU: US3228
✔ In Stock: 4
A compact triple‑square spline bit socket set designed for European vehicles. It includes six high‑strength bits in 3/8″ and 1/2″ drive sizes, covering common M‑series fasteners used on VW, Audi, Mercedes, Porsche and more.
Ideal for cylinder head work, axle shafts, drivetrain components and other specialised automotive applications.
110pc Copper Washer Assortment Box
£13SKU: US2888
✔ In Stock: 25
US2888 US Pro 110pc Copper Washer Assortment Box.
Contains:
– 30pc 6 x 10 x 0.9mm
– 25pc – 8 x 12 x 0.9mm
– 20pc – 10 x 16 x 1.0mm
– 15pc – 11 x 17 x 1.3mm
– 10pc – 12 x 20 x 1.44mm
– 10pc – 16 x 22 x 1.44mm35pc 1/2″ Dr. 6 Point Deep & Shallow Impact Socket Set
£68SKU: US3508
⚠ Available on backorder
US3508 US Pro A selection of deep and shallow impact sockets with 1/2″ drive, 6 point, CRV material hardened to HRC 42-48. Phosphate finish for protection. Supplied in EVA tray.
- Shallow Sizes: 8mm | 9mm | 10mm | 11mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 18mm | 19mm | 20mm | 21mm | 22mm | 23mm | 24mm | 27mm | 30mm | 32mm
- Deep Sizes: 10mm | 12mm | 13mm | 14mm | 15mm | 16mm | 17mm | 18mm | 19mm | 21mm | 22mm | 24mm | 27mm | 30mm | 32mm
Hydraulic Wheel Hub Puller 10 Ton In Case
£105SKU: US5149
✔ In Stock: 1
US5149 US Pro Hydraulic ram providing up to 10 tons of power the most stubborn of hubs. To aid in the removal of wheel hubs, etc… For both four & five stud hubs. Can be used for a wide range of applications. Diameter of the tools disc 148mm approximately.
10pc 1/2″ Dr. Specialist Automotive Socket Set
£24.34SKU: US3467
✔ In Stock: 5
A collection of difficult to find socket types often not included in standard sets.
• M10S special profile 6 point socket for Toyota idler gear centre fixings
• 20mm 10 point socket for Honda Civic lower control arm bolts
• M6S, M8S, M12S special profile 6 point for Nissan and Renault clutches, cylinder heads and balance shaft fixings
• 8TS special 3 point profile for Nissan Balance shaft fixings
• 10 and 12mm 5 sided (pentagon) sockets for Nissan brake and fuel pump fixings
– 19mm 5 sided socket for Citroen, Peugeot and Renault brake calliper mounting plate fixings.
14mm 5 sided socket for Smart car, Astra G and Zafira brake calliper mounting plate fixing
• Supplied on a storage rail8pc 1″ Deep Impact Socket Set
£60SKU: M0612
✔ In Stock: 2
Chrome molybdenum steel used for applications that. Command high torque rates. Chemically blacked, 6 point hardened & tempered impact sockets. Phosphate finish to assist with corrosion resistance. Drilled head to facilitate retaining pin. For use with air impact wrenches.
- Sizes: 24mm | 27mm | 29mm | 30mm | 32mm | 33mm | 36mm | 38mm
13mm Flexible Gear 72 Teeth Ratchet Combination Wrench
£7SKU: US3882
✖ Out of Stock
US3882 US Pro 13mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
10mm Flexible Gear 72 Teeth Ratchet Combination Wrench
£6SKU: US3879
✖ Out of Stock
US3879 US Pro 10mm Flexible Gear 72 Teeth Ratchet Combination Wrench.
Breakaway Cable 1055mm – Snap Hook & Clevis Pin Type
£5SKU: US9278
✖ Out of Stock
US9278 US Pro Breakaway Cable 1055mm – Snap Hook & Clevis Pin Type. Heavy duty breakaway cable for caravans, trailers, horse boxes etc. Designed to activate the brakes on your trailer or caravan in the event if a decoupling. The cable is made from 3-4mm multi-strand steel wire with a protective red PVC sheathing. There is a snap hook fitting one end and U fitting with clevis pin the other.
- Overall Length: 1055mm
- Wire: 3 – 4mm Multi-strand
- Breaking Load: 5000N
- Snap Hook: 70 x 6.7mm
- U Fitting: 47.5 x 18.5mm (2.7mm Plate)
- PVC Coated Wire
2 Leg Chain Sling 1m, 8mm G80 2.8 Tonne Adjustable
£60SKU: US9109
✔ In Stock: 4
US9109 US Pro 2 Leg Chain Sling 1m, 8mm G80 2.8 Tonne Adjustable. Simple but highly effective Lifting Chain slings are designed for use in a various selection of industrial, construction and rigging applications. This Sling has a Working Load Limit (WLL) of 2.8 Tonnes and conforms to EN 818-4 (Grade 80). The grab hooks allow the chains to be shortened. It is important to ensure that adequate safety precautions are adhered to at all times in all aspects of the particular lifting scenario.
1 x Master Link: WLL 4.25T
2 x Connector Link: G80, WLL 2T
2 x Grab Hooks (Shorteners): G80, WLL 2T
2 x 1m, 8mm Chain: G80, WLL 2T
2 x Clevis Hook: G80, WLL 2T
1 x ID TagUniversal CV Joint Removal Tool
£22SKU: US6194
✔ In Stock: 2
US6194 US Pro Universal CV Joint Removal Tool. Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to the transmission. Saves on labour time and suitable for most vehicles.
Magnetic Tool Holder Set 200mm, 300mm, 450mm
£12SKU: US6733
✔ In Stock: 4
US6733 US Pro Magnetic Tool Holder Set 200, 300, 450mm. Multi-purpose magnetic tool holder. Organize, hold and display hardware items such as hammers, wrenches, screwdrivers and more. Perfect for use in garages, service stations, workshops, commercial kitchens, and even inside trucks and vans. Very powerful magnets. Can hold hammers, wrenches, screwdrivers, punches and more. Pre-drilled holes. 6 Screws included.
- Sizes: 8″ (200mm), 12″ (300mm), 18″ (455mm)
20pc Radio Removal Tool Set
£10SKU: US6772
✔ In Stock: 2
US6772 US Pro 20pc Radio Removal Tool Set. For Removing or installing in-car entertainment systems.
4pc – No. 1 L and NO.1 R – VW-AUDI, MERCEDES BENZ, RENAULT, ALPINE, BECKER
2pc – No. 2 MERCEDES BENZ, PORSCHE, BECKER
2pc – No. 3 VW
2pc – No. 4 BECKER
2pc – No. 5 SKODA
1pc – Allen Hex Wrench – BMW, OPEL
1pc – Special Pentagon Wrench – BMW
2pc – Radio Removal V-Hook – BLAUPUNKT, PEUGEOT, CLARION
2pc – Radio Removal U Hooks – ALFA, FIAT, FORD, PSA, RENAULT, VW-AUDI, BLAUPUNKT, GRUNDIG, VDO
2pc – Radio Removal Keys – JVC, PIONEERAutomotive Circuit Tester 6 – 12V
£1.70SKU: US6815
✖ Out of Stock
US6815 US Pro Automotive Circuit Tester 6 – 12V. Sharp steel probe easily pierces wire insulation to check circuitry. Light glows in handle when a circuit is complete. Steel spring to protect the ground wire.
- Range: 6 – 24V DC
- Tool Length: 195mm (approx.)
- Exposed Probe Length: 80mm (approx.)
- Wire Length: 950mm (approx.)
- CE Approved
