Silverline Welding Clamp Set 3pc
£26.51SKU: 245017
✖ Out of Stock
Nickel-plated steel for corrosion resistance. Adjustable opening and quick-release lever. Includes: 240mm sheet metal clamp, 280mm welding clamp and 275mm C-clamp pliers.
Showing 817–832 of 850 results
SKU: 245017
✖ Out of Stock
Nickel-plated steel for corrosion resistance. Adjustable opening and quick-release lever. Includes: 240mm sheet metal clamp, 280mm welding clamp and 275mm C-clamp pliers.
SKU: 934295
✔ In Stock: 6
Suitable for MIG, TIG and Arc (MMA/GMAW) electric welding. Solar-powered for simple and reliable operation. Comfortable 4-way adjustable padded headband for comfortable fit. Dual light sensors switch from light to dark in 1/5,000th second. DIN shade 3 (light) / DIN shade 11 (dark). Certified to EN379 and EN175.
1 x Welding Helmet Auto Darkening
2 x Front Spatter Shields
2 x Rear Spatter Shield
1 x Tint / Darkening Unit
1 x Instruction Manual
SKU: 868520
✖ Out of Stock
Suitable for MIG, TIG & Arc (MMA/GMAW) electric welding. Wraparound head shield provides good face and front neck protection. Flip-up lens for improved vision, which is especially useful in restricted spaces. Face shield certified to EN175. Green infrared lens certified to DIN 11, EN169. Spatter shield certified to EN166.
SKU: 148968
✔ In Stock: 3
Powerful welding magnet for holding steel parts in place at 30°, 45°, 60°, 75° and 90°. Frees hands for work. Use for welding, soldering, assembly marking off and pipe installation.
SKU: 531361
✖ Out of Stock
High quality self-lubricating silicon carbide sheets with waterproof latex backing. For use on metal, wet or dry. Very fine grades, ideal for rubbing down between painting. 230 x 280mm.
SKU: 588812
✖ Out of Stock
Heavy duty steel drifts with phosphate coating to prevent corrosion. Fast, effective removal and installation of bearings on front wheel-drive cars. Removes front hub bearings without dismantling the strut assembly, reducing chances of damage to hub and bearings. Heavyweight drive screw for use with impact tools. Includes 4 x external sleeves, 2 x sleeve caps, 2 x washers, thrust bolt, 14 x drift rings and workshop press adaptor in a tough storage case. Drift sizes: 50, 55, 59, 63, 66.5, 70, 71.5, 73, 73, 75, 77.5, 81.5, 83 and 88mm.
SKU: 250311
✖ Out of Stock
Soft bristles clean steel and alloy wheels without scratching. Soft-grip handle.
SKU: 250475
✔ In Stock: 18
Provides watertight seal for water-pipe fitting and installation work. Helps prevent bi-metal corrosion in threaded joints. Lubricates threaded joints during assembly and helps prevent bi-metal corrosion. Suitable for cast iron, steel, alloys, plastic, brass and ceramics. Length 12m. Complies with BS 6920-1:2000 and BS 7786:2006.
SKU: 868607
✖ Out of Stock
Solid rubber head and hardwood shaft. Head secured with glue and pin. For soft striking of woodworking chisels, forming sheet metal, and easing components.
SKU: 633967
✖ Out of Stock
Open and bi-hexagonal ends with 15° offset for greater access. Hardened and tempered, drop-forged chrome vanadium. High quality fully polished finish. Ultra-strong ballistic nylon storage roll. Includes sizes 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″ and 9/16″ Whitworth.
SKU: 675055
✖ Out of Stock
Solid forged, hardened and tempered steel. Powder-coated with ground claw and chisel. Minimises damage to supporting surface. Thin, wide chisel blade for removing skirting, coving and dado rails. Rounded claw end for removing tacks and nails.
SKU: 554603
✖ Out of Stock
Reinforced composite handles with heat-treated, chromed steel shafts for corrosion resistance. Removes a variety of bonded and rubber-sealed vehicle windscreens. Tool handle features hanging eye for storage. Compact kit stores away easily. Includes wire feeder tool, cutting wire, trim pad remover, screen moulding removal tool, bonded screen removal tool, 2 x wire handles and tool tray.
SKU: 499236
✖ Out of Stock
Heavy duty, hardened steel construction with locking feature allowing the tool to be fastened securely to the wiper arm. Combination of swivel-mounted thrust bearing and tommy bar on thrust bolt allows even the most stubborn wiper arms to be lifted off their shafts. Also suitable for battery terminal and alternator bearing removal. Maximum opening: 28mm.
SKU: 868565
✖ Out of Stock
Heavy duty double-handed polypropylene brush. Ergonomic non-slip handle with finger indents. For removal of dirt, contaminates, rust and paint from metal, wood, plastic, brick, render and pebbledash.
SKU: 868879
✖ Out of Stock
Compact steel wire handles. Cuts pipework and ducting in confined spaces. Suitable for all types of plastic tubing and thin-gauge metal. Includes spare blade. Minimum cutting diameter 40mm.
SKU: 513446
✖ Out of Stock
Workpiece support with wood cross bar and 30mm dia heavy steel-coated tubes. Galvanised lock pin adjusts the height. Four adjustable heights of 650, 700, 800 and 900mm. Max load 150kg.
We care about your privacy
In order to provide you a personalized shopping experience, our site uses cookies.Â
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now