Showing 326–350 of 418 results
£35.72✔ In Stock: 1
The 7 piece body repair kit includes seven essential tools for panel beating, auto body repair, and more. The kit features three high-quality hammers: a bumping hammer, a pick and finish hammer, and a reverse curve hammer. These hammers are perfect for shaping and smoothing out dents and bumps in your vehicle’s body.
- Hammers Included: Bumping | Pick & Finish | Reverse Curve
- Dollies Included: Curved | Double End | Shrinking | Utility
£40✔ In Stock: 2
2 Piece viscous fan spanner with fan hub holding tool.
£120✔ In Stock: 2
21 Piece master adaptor set ball joint service kit. With 4 wheel drive adaptors. Brake anchor pin removal and installation. This tool kit is designed for use on all cars and light trucks that have press-fit type ball joints without the need to remove the control arm from the vehicle. For servicing universal joints on most cars / vans and light trucks.
– C-Frame & Forcing Screw
– Installation Adaptor
– Removal Adaptor
– Installation Cups
– Removal Cups
– Receiving Tubes
£16✔ In Stock: 2
Product Description: Circuit Tester Power On For 6 / 12 and 24 Volt Circuits Insulated Ground Clip Stainless Steel Probe Heavy Duty 5ft Lead
- Circuit Tester,
- Power On,
- For 6 / 12 & 24 Volt Circuits,
- Insulated Ground Clip,
- Stainless Steel Probe,
- Heavy Duty 5ft Lead.
£16✖ Out of Stock
Quick release grease coupler with 1/8” NPT Female M10 x 1 thread. For coupling to various grease guns – also air and electric grease guns and bulk bucket greasers. Fits all SAE and Metric zerk fittings.
- Working Pressure: 10000psi / 690bar
- Max. Bursting Pressure: 15000psi / 1034bar
£23✔ In Stock: 6
The 7pc Windscreen Removal Tool Set is a complete tool kit for the removal of bonded and rubber seal screen. Reinforced composite handles. Heat-treated chrome steel shafts. Cutting wire for precise removal. Wire gripping handles for added control. Windscreen removal tool for quick and easy removal. Wire feeder tool for easy wire installation. Trim pad remover for removing trim without damage. Windscreen moulding release tool for safely removing mouldings.
£22✖ Out of Stock
- 6 Piece Spline Bit Set – 1/2” Dr.
- Sizes: M14 | M16 | M18
- 45mm & 75mm Deep
- Chrome Molybdenum
£20✖ Out of Stock
2 Piece coil spring compressor, 355mm jaw capacity. For use On or Off vehicles when working on suspension struts. Can be use with a 1/2” Dr. Ratchet or 21mm Spanner / Socket.
£13✔ In Stock: 7
The 11 piece trim removal set is made from non-scratch, impact-resistant nylon, ideal for removing automotive trim, door panels, and dashboard fascias. Comes in heavy duty canvas compartment tool roll for easy storage and transportation.
£34.08✖ Out of Stock
- 4 Piece Circlip / Snap Ring Pliers Set
- 13” / 325mm With Straight & 90 Degree Tips
£47.51✔ In Stock: 5
16 Piece slide hammer / puller set. Combination puller with 5lb malleable steel slide hammer. Drop forged steel pullers and attachments. Converts to 2 or 3 jaw internal / external pullers.
£15✔ In Stock: 3
The CT1886 magnetic wing cover will protect your bodywork from scratches, dings, and other minor damages, its magnetic backing ensures a secure and easy-to-install fit.
- Size: 1200 x 1000mm
- Weather Resistant: Yes
- Easy To Install: Yes
- Secure Fit: Yes
£36.68✔ In Stock: 3
The CT2134 is a digital battery load tester designed for 12V DC lead acid batteries. It can test the battery’s voltage, load capacity, and starter current draw in just 10 seconds, making it a fast and convenient tool for checking the condition of your battery. 125A digital battery load tester for 12V DC lead-acid batteries. Quick and easy to use with digital display and battery condition LED’s. Inbuilt starter crank test procedure and CCA setting 200 – 1000. Heavy duty insulated clamps. Test for excessive starter current draw. Test for trucks and cars. Test for charger. Test for battery voltage.
£30✔ In Stock: 1
Diesel injector seat cutter set – 7 piece. Re-face the diesel injector seat in order for the new or reconditioned injector to be fitted correctly. Avoid a high risk of blow-by occurring because of the build up of carbon deposits and the effects of corrosion. High quality material – skd11 provide easy clean work. Various cutters are available for nearly all diesel cars.
£11✔ In Stock: 22
The CT2798. This set of four scrapers includes sizes of 19mm, 22mm, 25mm, and 38mm by 270mm, perfect for a variety of tasks. The scrapers are made of high-quality plastic. Ideal for removal of glued weights on aluminium rims. Suitable for removing trim from bodywork.
- Sizes: 19mm, 22mm, 25mm, and 38mm by 270mm
- Material: High Quality Plastic
£7.50✔ In Stock: 1
Castor wheel 100mm flattened universal with brake.
£45✖ Out of Stock
Brake or clutch bleeding system. One-man bleeding system requiring no external power source. Reservoir holds 2.5 litres of hydraulic fluid – flush entire system with one fill without the risk of running the reservoir dry. Pressure range makes unit suitable for use with ABS systems. Fitted with 42mm diameter cap with 90 degree angled connector which is suitable for most European vehicles.
- Working Pressure: 2bar / 30psi
- Max. Pressure: 5bar / 70psi
- Capacity: 2.5 Litre
- NOW With 1 Litre Suction Tank
£33.56✔ In Stock: 3
Valve spring compressor 35 – 200mm. For large petrol or diesel engines. Chrome plated.
2 Valve Spring Pressure Pieces:
- Outside Diameter: 25 mm For Spring Diameter: 21 – 25 mm
- Outside Diameter: 30 mm For Spring Diameter: 24 – 30 mm
£7.50✔ In Stock: 6
12 Litre galvanised steel bucket with wooden handle, seamed sides.
- Size: 29.5cm x 21cm x 26.5cm (approx.)
- Thickness: 0.35mm
- Net Weight: 700g
£37.88✖ Out of Stock
552pc Insulated terminal set with ratchet crimping pliers, black insulation tape. Suitable for 1.5mm | 2.5mm | 6mm insulated terminals.
- 50 x Cable Ties: 2.5 x 100mm
- 90 x Ring M4: Red / Blue / Yellow
- 50 x Spade: Red / Blue
- 60 x Bullet Male Red / Blue
- 50 x Bullet Female: Red / Blue
- 50 x Butt Connector: Red / Blue
- 60 x Splice Male: Red / Blue
- 90 x Splice Female: Red / Blue / Yellow
- 50 x Splice Female Full: Red / Blue
£190✖ Out of Stock
12V Diesel Fuel Transfer Dispenser Pump with Hose / Nozzle / Flow Meter and Self Priming gun. Ideal for transferring and distributing Diesel Fuel and Bio-diesel / waste vegetable Oil etc…
- Voltage: 12V / DC
- Motor Coil Material: 100% Full copper
- Power: 175W
- Load Current: 10Amps
- Inlet Diameter: 3/4”
- Outlet Diameter: 3/4”
- Flow: 45L/min
- Head: 7m
- Suction: 3m
- Impeller: Cast Iron
- Suction Hose: 2m
- Delivery Hose: 4m
- Manual Nozzle
- CE Approved
£25✖ Out of Stock
- 4 x 1 Pin Male Connectors
- 4 x 2 Pin Male Connectors
- 6 x 3 Pin Male Connectors
- 3 x 4 Pin Male Connectors
- 3 x 5 Pin Male Connectors
- 2 x 6 Pin Male Connectors
- 100 x Male Terminals
- 180 x Terminals With Yellow Seals
- 4 x 1 Pin Female Connectors
- 4 x 2 Pin Female Connectors
- 6 x 3 Pin Female Connectors
- 3 x 4 Pin Female Connectors
- 3 x 5 Pin Female Connectors
- 2 x 6 Pin Female Connectors
- 100 x Female Terminals
£70✖ Out of Stock
Enables lowering of the wishbone and holds in the retracted position. Ideal for replacing the wheel bearing / repairing struts or drive shafts. Prevents damage to the ball joints and drive shaft sleeves. Low height for easy and fast assembly.
- Maximum Traction: 500kg
- Total Length With Hook: 1030mm
- Clamping Height: 65mm To 265mm
- Chain Length Including Hook: 660mm (approx.)
