38mm 1″ Dr. Impact Socket
£18SKU: CT2331
✔ In Stock: 3
38mm 1″ Dr. Impact Socket
Neilsen Tools
Showing 251–275 of 418 results
32mm 1″ Dr. Impact Socket
£15SKU: CT2328
✔ In Stock: 5
32mm Impact Socket 1″ Drive For both manual and impact wrenches, can be fixed on impact wrench by pin and O-Ring.
– Impact Socket
– Material: CR-MO
– Height: 62mm
30mm 1″ Dr. Impact Socket
£14SKU: CT2327
✔ In Stock: 6
30mm Impact Socket 1″ Drive For both manual and impact wrenches, can be fixed on impact wrench by pin and O-Ring.
– Deep Impact Socket
– Material: CR-MO
– Height: 90mm
Hand Held Vacuum Pump
£24SKU: CT2311
✔ In Stock: 1
The allows you to efficiently check components of the vacuum system and bleed brake and clutch systems with ease. Professional-grade vacuum pump and brake bleeder tool. Suitable for checking components of the vacuum system, including MAP sensors, valves, and hoses. Also suitable for bleeding brake and clutch systems. Includes connecting hoses, bleeding containers, hose connectors and adaptors.
Disc Brake Pad Spreader 87mm
£12SKU: CT2301
✔ In Stock: 6
The is An essential tool for the removal and installation of new brake pads. Suitable for most ATE / Bendix / Delco & Girling Calipers. Alfa. Audi. Fiat. Ford. Nissan. Vauxhall. Opel. Peugeot. Porsche. Renault. Rover. VW. Can Be used with 1/2″ Dr. ratchet or 21mm spanner.
Length: 87mm
9pc Auto Body Repair Tool Set
£138SKU: CT2097
✔ In Stock: 2
The is crafted from high-quality drop-forged steel, this set includes 4 different hammers with professional hickory handles: a bumping hammer, a skinning hammer, a pein hammer, and a pick/finish hammer. You’ll also get 3 different dollies (a toe dolly, a universal dolly, and a heel dolly) as well as 2 spoons (a dinging spoon and a surfacing spoon). All of these tools are designed to work on both flat and curved surfaces. Supplied in a high quality plastic storage case.
– 4 Hammers: Bumping, Skinning, Pein & Pick/Finish
– Professional Hickory Handles
– 3 Dollies: Toe, Universal, Heel
– 2 Spoons: Dinging, Surfacing
– Use On Flat & Curved Surfaces
Magnetic Parts Tray 240 x 240mm
£15SKU: CT1316
✔ In Stock: 4
Magnetic Parts Tray provides scratch-free use, thanks to the rubber-covered magnets and stainless steel construction. Keep your work area organized and damage-free with this high-quality magnetic tray.
1/4″ Air Hammer & Descaler Needle Gun Tool Kit
£50SKU: CT0676
✖ Out of Stock
Effortlessly tackle cutting, rust removal, paint stripping, and more with this Professional Quality 150mm Air Hammer. Designed for automotive, garage, and home workshop use, this tool features a powerful 4500 BPM to handle heavy-duty tasks with ease. With 19 needles that chip away at surfaces, it’s perfect for use on heavier work, making it an essential tool for professionals and DIYers alike.
Specifications:
Air Inlet: 1/4”
Air Pressure: 90psi
BPM: 4500
Average Air Consumption: 4 CFM
Length: 230mm
Inner Diameter: 30mm
Outer Diameter: 50mmIncluded Attachments:
1 x Taper Punch
1 x Ripping Chisel
1 x Tailpipe Cutter Chisel
1 x Spot Weld Breaker Chisel
1 x Coil Spring Chisel Retainer
1 x Needle De-Scaler Attachment
Stainless Steel Mobile Workbench
£1,050SKU: CT1973
✔ In Stock: 1
Stainless Steel Rolling Workbench Solid 38mm hardwood butcher block style worktop. Fingerprint resistant stainless steel finish. Secure locking cabinet and drawers. Full-extension high-capacity ball bearing drawer slides. With protective drawer liners and 4 plastic storage bins included.
- Material: 430 Stainless Steel – 0.8mm For Drawer – 0.8mm For Panel & Shelf
- Drawer Slides Loading Capacity: 100lb Per Pair
- Caster Size: Heavy Duty 6″ x 2″ – 2 Fixed Type & 2 Swivel With Brakes
- Workbench Dimensions: 1520mm x 482mm x 946mm / 60″ x 19″ x 37″ (Width x Length x Height)
Automobile Suspension Split Hub Knuckle Expansion Separator
£22SKU: CT6748
✔ In Stock: 12
Used to remove and install suspension struts while leaving the hub on the vehicle, designed to keep the suspension hubs separate and open. The double ended design allows suspension strut split spreader to be used with the larger upper hub and the lower ball jointed hub to be split, not easy to break. Expertly designed to split the steering knuckle hub, enhancing your vehicle’s suspension and braking performance.
Coolant System Flush Gun
£20SKU: CT5827
✔ In Stock: 8
Air Flush Gun for Cooling Systems. Step adaptor for different hose diameters. For use with air and water to clean most systems. Trigger handle to control flushing and simulate pulsing force.
- 5 Adaptor Sizes: 19mm | 29mm | 32mm | 36.5mm | 40mm
- Operation Pressure: 90psi
CO2 Gas Regulator Gauge
£30.24SKU: CT5269
✔ In Stock: 8
CO2 Regulator Gauge For MIG and TIG providing accurate regulated gas flow, 2″ dual gauges for easy reading. Accurate measurement of gas. Brass regulator body. Internal safety pressure relief design. Plastic adjustment knob for smooth / easy touch flow settings. Ideal for commercial / industrial and laboratory applications.
– Inlet Pressure: 0 – 4500psi / 0 – 315bar
– Output Pressure Range: 0 – 10bar
– Flow: 0 – 20L/min
– Threaded Inlet W 21.8 x 1/14″ Standard
– Outlet / Tube diameter: 6mm / 1/8″ Inner Thread
6pc Oil Sump Plug Key Set 3/8″ Dr.
£10SKU: CT5234
✔ In Stock: 7
6pc Oil Drain Plug Key Set. Suitable for sumps / gear boxes and back axles on Citroen and Peugeot vehicles, 3/8″ Dr. Square Socket Bit Set with Rail.
- Sizes: 8mm | 10mm | 12mm | 14mm | 3/8″ | 1/2″
Step Drill HSS Steel 4 – 42mm
£15SKU: CT5223
✔ In Stock: 33
HSS Step Drill Ideal for cutting holes in metal and other materials.
- Sizes: 4mm | 6mm | 9mm | 12mm | 15mm | 18mm | 21mm | 24mm | 27mm | 30mm | 33mm | 36mm | 39mm | 42mm
46mm Combination Spanner In Polished Finish
£29SKU: CT5180
✔ In Stock: 1
46mm – Combination Spanner with Polished Finish.
CV Boot Installation Tool
£16.38SKU: CT5124
✔ In Stock: 3
CV Boot Tool For installing vehicle rubber CV boots without dismantling the CV joint.
- Steel Centre / Plastic Composite Cone
- Diameter Size: 100mm External / 93mm Internal
- Length: 405mm
6pc EGT Sensor Socket Set Set
£26.09SKU: CT5105
✔ In Stock: 5
6pc EGT Sensor Socket Set – 3/8″ Dr. for exhaust gas temperature sensors. For removing most EGT sensors used on Cars / Light / Medium & Heavy Duty Trucks.
- Sizes: 13mm | 14mm | 17mm Deep & Shallow
Windscreen Crack Repair Kit
£12SKU: CT5101
✔ In Stock: 11
The Windscreen Repair Kit is designed for all types of laminated windscreens and can help fix or minimize the appearance of chips and cracks in your windshield, saving you the hassle and expense of replacing the entire windshield.
Standard Socket 3/8″ Dr. CR-V – 10mm
£2.50SKU: CT5009
✔ In Stock: 12
The 10mm Super Lock Socket – 3/8″ Drive is a high-quality, durable socket designed for secure and efficient fastening and loosening of bolts and nuts. Its unique “Super Lock” feature ensures a tight grip on fasteners, reducing the risk of slipping or rounding off bolt heads.