Neilsen

Multi-Purpose Inner Tie Rod Tool Compatible with 1/2″ Dr. tool, use to replace the inner tie rod ends
without replacing the rack and pinion.
Capacity: 33 – 42mm

2 Way Hydraulic Ball Joint Separator Kit. Specially designed to be operated manually or by 12 Tonne hydraulic ram. Also for splitting Track Rod ends and Anti-roll Bar Mountings
Jaw Opening: 30mm | 34mm | 40mm
Thrust Screw Lengths: 80mm | 100mm
Pivot Rod Length: 125mm

30pc Alternator Service Kit

1/2″ Dr. – 10mm Hex Shank Adaptor
1/2″ | 3/8″ Dr. Star / Spline & Hex Bits To Fit Most Alternators

Ideal for BOSCH alternators with free wheel pulleys.

– M10 Spline Bit Socket: 140mm
– M10 Spline Bit: 14mm Hex Drive: 63mm Long
– M10 Spline Bit Socket With 31T Nut: 90mm Long
– 8mm Hexagon Bit Socket: 120mm Long
– T50 TX-Star Bit Socket: 120mm Long
– M8 – M10 Spline Bits: 75mm Long
– T40 – T50 TX-Star Bits: 75mm Long
– 8 – 10mm Hexagon Bits: 75mm Long
– 10mm Hex Bits: 50mm / 70mm Long
– 33 Teeth Alternator Nut – 15mm Hex. Tip / L
– 33 Teeth Alternator Nut – 15mm Hex. Tip / S
– 33 Teeth Alternator Nut – 17mm Hex. Tip
– 33 Teeth Alternator Nut – 22mm Hex. Tip
– 17mm Hexagon Alternator Nut – Inner Size: 14mm
– 1/4″ Dr. 10mm Hex Socket
– 17mm Hexagon Alternator Nut
– 22mm Hexagon Alternator Nut
– 28mm x 22mm Hexagon Alternator Nut
– 28mm x 21mm Hexagon Alternator Nut
– 28mm x 19mm Hexagon Alternator Nut
– 17mm x 19mm Hexagon Alternator Nut
– 17mm x 21mm Hexagon Alternator Nut
– 4 Point Alternator Nut With 17mm Hex Tip
– 3 Point Alternator Nut With 38mm Hex Tip

Wheel Bearing and Seal Installation Kit. New lightweight design for the installation of bearings without damaging the bearing or housing. Contains 3 metal bearing drift sleeves and 34 nylon drifts with Deadblow Hammer. Can also be used to install oil seals. Fits most sizes of bearing and seals found on modern vehicles.

Drift Sleeve Diameters: 25mm | 40mm | 60mm
Drift Sleeve Length: 220mm
Nylon Drift Diameter: 26mm | 28mm | 30mm | 32mm x 2 | 35mm x 3 | 37mm | 40mm | 42mm x 2 | 47mm x 3 | 52mm x 2 | 55mm | 60mm | 62mm x 3 | 68mm | 72mm x 2 | 75mm | 80mm x 2 | 82mm | 85mm | 90mm x 2 | 100mm | 110mm

51pc Bearing / Bushing and Seal Master Driver Set. Suitable for mounting bearings / bushings and sealing rings, 220mm knurled handle grip for use with a hammer. Particularly useful when used with a hydraulic press.

– Support Disc 74mm | Bore 12.2mm | Height 15.2mm
– Disc Sizes 18mm | 19mm | 20mm | 21mm | 22mm | 23mm | 24mm | 25mm | 26mm | 27mm | 28mm | 29mm | 30mm | 31mm | 32mm | 33mm | 34mm | 35mm | 36mm | 37mm | 38mm | 39mm | 40mm | 41mm | 42mm | 43mm | 44mm | 45mm | 46mm | 47mm | 48mm | 49mm | 50mm | 51mm | 52mm | 53mm | 54mm | 55mm | 56mm | 57mm | 58mm | 59mm | 60mm | 61mm | 62mm | 63mm | 64mm | 65mm (12.2mm High & 12.2mm Bore)
– 3mm Hexagonal Key