No products were found matching your selection.
Based on what you were looking for, you might like:
£14.17✔ In Stock: 279
- Reference: 04942-0K070, 049420K070
- Rear Handbrake Shoe Fitting Kit For Toyota Hilux 2005-Present,
- Comes With All Fitting Clips And Springs For The Rear Handbrake Shoes.
£83.33✔ In Stock: 7
- Rear Spare Wheel Cover In Black For Toyota Land Cruiser 2003-2010,
- Fits 265/65/R17 Tyre,
- Comes With Two Keys For Locking.
£3.17✔ In Stock: 2
Expert quality, metric – sized high speed steel drills (with 5% COB alt). The addition of COB alt to HSS prevents wear for longer life.
£15✔ In Stock: 68
- Reference: 48306-35180, TSB-738, 4830635180, TSB738
- Rear Bump Stop Shock Absorber For Toyota Land Cruiser 1996-2010,
- This Product Is Designed To Prevent Metal On Metal Contact,
- Fits Left & Right Side Of The Vehicle,
- May Need Fixed To Frame By Alternative Methods Such As Spot Weld On Some Models.
£21.76✔ In Stock: 1
Epoxy coated carbon steel, fully hardened and tempered. Attached to an ash handle with clear lacquered finish and Y-dee handle.
£450✔ In Stock: 3
Infrared heater suitable for well-ventilated spaces. Fitted with a thermostatic control unit, stainless steel combustion chamber, radiant plate, photocell safety device and automatic ignition. The in-line fuel filter, electromagnetic pump and internal combustion chamber combine to provide a highly efficient ignition and heat output. Its low noise and clean burning operation work with both kerosene and diesel. The 12 litre fuel tank achieves approximately 9hrs continuous running time, producing an impressive 60,000 Btu/hour. Grade 2 or higher kerosene required.
Dimensions: 560 x 330 x 560mm
Max Fuel Consumption: 1.39L/h
Max Heat Output: 60,000 BTU (17kW)
Motor: 94W
Tank Capacity: 12L
Weight: 13.8kg (approx.)
£75✔ In Stock: 129
- Reference: 81110-0K420, 811100K420, 318915
- Front right headlamp for Toyota Hilux 2012-2016,
- Bulbs / Bulb holders not included,
- Suitable for electric adjustment,
- Electrical adjustment motor not included,
- For vehicles with clear indicator lens.
£42.86✖ Out of Stock
Die grinder perfectly designed for grinding and polishing metal components. Manufactured from lightweight aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Fitted with a lever block trigger for increased safety and an adjustable 4-speed rear regulator. Attached with a 1/4″ BSP airline connector which connects with the 360° rotating air inlet, helping prevent air-lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold-sink effect.
Air Inlet: 1/4″ BSP
Average Air Consumption: 4.0cfm (113L/min)
Collet Size: 6mm
Free Speed: 20,000 RPM
Min Hose Size: 3/8″ (10mm)
Operating Air Pressure: 90psi (6.2bar)
Vibration Level: 2.9m/s2
Weight: 0.53kg